Hi James,
Thanks for your comments.
We have added the changes suggested by Mark Salyzyn in this driver patch.
Patch description:
Added new hardware device 0x28b interface for PMC-Sierra's SRC based controller family.
- new src.c file for 0x28b specific functions
- new XPORT header required
- sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT)
- async. Interface: different inbound queue handling, no outbound I2O queue available, using doorbell ("PmDoorBellResponseSent") and response buffer on the host ("host_rrq") for status
- changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending" bit to inform about pending AIF, "AifRequest" command to read AIF, "NoMoreAifDataAvailable" to mark the end of the AIFs
Please see the patch below:
This attached patch is against current scsi-misc-2.6.
ObligatoryDisclaimer: Please accept my condolences regarding Outlook's handling of patch attachments (inline gets damaged, please use attachment).
Signed-off-by: Mahesh Rajashekhara <aacraid@xxxxxxxxxxxxxx>
---
drivers/scsi/aacraid/Makefile | 2
drivers/scsi/aacraid/aachba.c | 7
drivers/scsi/aacraid/aacraid.h | 106 ++++++-
drivers/scsi/aacraid/commctrl.c | 3
drivers/scsi/aacraid/comminit.c | 58 +++
drivers/scsi/aacraid/commsup.c | 41 ++
drivers/scsi/aacraid/dpcsup.c | 85 ++++-
drivers/scsi/aacraid/linit.c | 15 -
drivers/scsi/aacraid/nark.c | 3
drivers/scsi/aacraid/rkt.c | 3
drivers/scsi/aacraid/rx.c | 33 +-
drivers/scsi/aacraid/sa.c | 7
drivers/scsi/aacraid/src.c | 594 ++++++++++++++++++++++++++++++++++++++++
13 files changed, 898 insertions(+), 59 deletions(-)
diff -purN a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
--- a/drivers/scsi/aacraid/aachba.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/aachba.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -1486,7 +1487,9 @@ int aac_get_adapter_info(struct aac_dev*
dev->a_ops.adapter_write = aac_write_block;
}
dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
- if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
+ if (dev->adapter_info.options & AAC_OPT_NEW_COMM_TYPE1)
+ dev->adapter_info.options |= AAC_OPT_NEW_COMM;
+ if (!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
/*
* Worst case size that could cause sg overflow when
* we break up SG elements that are larger than 64KB.
diff -purN a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
--- a/drivers/scsi/aacraid/aacraid.h 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/aacraid.h 2011-03-16 16:50:55.000000000 +0530
@@ -12,7 +12,7 @@
*----------------------------------------------------------------------------*/
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 26400
+# define AAC_DRIVER_BUILD 28000
# define AAC_DRIVER_BRANCH "-ms"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
@@ -277,6 +277,16 @@ enum aac_queue_types {
#define FsaNormal 1
+/* transport FIB header (PMC) */
+struct aac_fib_xporthdr {
+ u64 HostAddress; /* FIB host address w/o xport header */
+ u32 Size; /* FIB size excluding xport header */
+ u32 Handle; /* driver handle to reference the FIB */
+ u64 Reserved[2];
+};
+
+#define ALIGN32 32
+
/*
* Define the FIB. The FIB is the where all the requested data and
* command information are put to the application on the FSA adapter.
@@ -394,7 +404,9 @@ enum fib_xfer_state {
AdapterMicroFib = (1<<17),
BIOSFibPath = (1<<18),
FastResponseCapable = (1<<19),
- ApiFib = (1<<20) // Its an API Fib.
+ ApiFib = (1<<20), /* Its an API Fib */
+ /* PMC NEW COMM: There is no more AIF data pending */
+ NoMoreAifDataAvailable = (1<<21)
};
/*
@@ -404,6 +416,7 @@ enum fib_xfer_state {
#define ADAPTER_INIT_STRUCT_REVISION 3
#define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science
+#define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */
struct aac_init
{
@@ -428,9 +441,15 @@ struct aac_init
#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010
#define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020
+#define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000041
__le32 MaxIoCommands; /* max outstanding commands */
__le32 MaxIoSize; /* largest I/O command */
__le32 MaxFibSize; /* largest FIB to adapter */
+ /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */
+ __le32 MaxNumAif; /* max number of aif */
+ /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */
+ __le32 HostRRQ_AddrLow;
+ __le32 HostRRQ_AddrHigh; /* Host RRQ (response queue) for SRC */
};
enum aac_log_level {
@@ -685,7 +704,7 @@ struct rx_inbound {
#define OutboundDoorbellReg MUnit.ODR
struct rx_registers {
- struct rx_mu_registers MUnit; /* 1300h - 1344h */
+ struct rx_mu_registers MUnit; /* 1300h - 1347h */
__le32 reserved1[2]; /* 1348h - 134ch */
struct rx_inbound IndexRegs;
};
@@ -703,7 +722,7 @@ struct rx_registers {
#define rkt_inbound rx_inbound
struct rkt_registers {
- struct rkt_mu_registers MUnit; /* 1300h - 1344h */
+ struct rkt_mu_registers MUnit; /* 1300h - 1347h */
__le32 reserved1[1006]; /* 1348h - 22fch */
struct rkt_inbound IndexRegs; /* 2300h - */
};
@@ -713,6 +732,44 @@ struct rkt_registers {
#define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR))
#define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR))
+/*
+ * PMC SRC message unit registers
+ */
+
+#define src_inbound rx_inbound
+
+struct src_mu_registers {
+ /* PCI*| Name */
+ __le32 reserved0[8]; /* 00h | Reserved */
+ __le32 IDR; /* 20h | Inbound Doorbell Register */
+ __le32 IISR; /* 24h | Inbound Int. Status Register */
+ __le32 reserved1[3]; /* 28h | Reserved */
+ __le32 OIMR; /* 34h | Outbound Int. Mask Register */
+ __le32 reserved2[25]; /* 38h | Reserved */
+ __le32 ODR_R; /* 9ch | Outbound Doorbell Read */
+ __le32 ODR_C; /* a0h | Outbound Doorbell Clear */
+ __le32 reserved3[6]; /* a4h | Reserved */
+ __le32 OMR; /* bch | Outbound Message Register */
+ __le32 IQ_L; /* c0h | Inbound Queue (Low address) */
+ __le32 IQ_H; /* c4h | Inbound Queue (High address) */
+};
+
+struct src_registers {
+ struct src_mu_registers MUnit; /* 00h - c7h */
+ __le32 reserved1[130790]; /* c8h - 7fc5fh */
+ struct src_inbound IndexRegs; /* 7fc60h */
+};
+
+#define src_readb(AEP, CSR) readb(&((AEP)->regs.src.bar0->CSR))
+#define src_readl(AEP, CSR) readl(&((AEP)->regs.src.bar0->CSR))
+#define src_writeb(AEP, CSR, value) writeb(value, \
+ &((AEP)->regs.src.bar0->CSR))
+#define src_writel(AEP, CSR, value) writel(value, \
+ &((AEP)->regs.src.bar0->CSR))
+
+#define SRC_ODR_SHIFT 12
+#define SRC_IDR_SHIFT 9
+
typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
struct aac_fib_context {
@@ -879,6 +936,7 @@ struct aac_supplement_adapter_info
#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001)
#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002)
#define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004)
+#define AAC_OPTION_DOORBELL_RESET cpu_to_le32(0x00004000)
#define AAC_SIS_VERSION_V3 3
#define AAC_SIS_SLOT_UNKNOWN 0xFF
@@ -940,6 +998,7 @@ struct aac_bus_info_response {
#define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16)
#define AAC_OPT_NEW_COMM cpu_to_le32(1<<17)
#define AAC_OPT_NEW_COMM_64 cpu_to_le32(1<<18)
+#define AAC_OPT_NEW_COMM_TYPE1 cpu_to_le32(1<<28)
struct aac_dev
{
@@ -952,6 +1011,7 @@ struct aac_dev
*/
unsigned max_fib_size;
unsigned sg_tablesize;
+ unsigned max_num_aif;
/*
* Map for 128 fib objects (64k)
@@ -980,10 +1040,21 @@ struct aac_dev
struct adapter_ops a_ops;
unsigned long fsrev; /* Main driver's revision number */
- unsigned base_size; /* Size of mapped in region */
+ unsigned long dbg_base; /* address of UART
+ * debug buffer */
+
+ unsigned base_size, dbg_size; /* Size of
+ * mapped in region */
+
struct aac_init *init; /* Holds initialization info to communicate with adapter */
dma_addr_t init_pa; /* Holds physical address of the init struct */
+ u32 *host_rrq; /* response queue
+ * if AAC_COMM_MESSAGE_TYPE1 */
+
+ dma_addr_t host_rrq_pa; /* phys. address */
+ u32 host_rrq_idx; /* index into rrq buffer */
+
struct pci_dev *pdev; /* Our PCI interface */
void * printfbuf; /* pointer to buffer used for printf's from the adapter */
void * comm_addr; /* Base address of Comm area */
@@ -1003,14 +1074,20 @@ struct aac_dev
*/
#ifndef AAC_MIN_FOOTPRINT_SIZE
# define AAC_MIN_FOOTPRINT_SIZE 8192
+# define AAC_MIN_SRC_BAR0_SIZE 0x400000
+# define AAC_MIN_SRC_BAR1_SIZE 0x800
#endif
union
{
struct sa_registers __iomem *sa;
struct rx_registers __iomem *rx;
struct rkt_registers __iomem *rkt;
+ struct {
+ struct src_registers __iomem *bar0;
+ char __iomem *bar1;
+ } src;
} regs;
- volatile void __iomem *base;
+ volatile void __iomem *base, *dbg_base_mapped;
volatile struct rx_inbound __iomem *IndexRegs;
u32 OIMR; /* Mask Register Cache */
/*
@@ -1031,9 +1108,8 @@ struct aac_dev
u8 comm_interface;
# define AAC_COMM_PRODUCER 0
# define AAC_COMM_MESSAGE 1
- /* macro side-effects BEWARE */
-# define raw_io_interface \
- init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4)
+# define AAC_COMM_MESSAGE_TYPE1 3
+ u8 raw_io_interface;
u8 raw_io_64;
u8 printf_enabled;
u8 in_reset;
@@ -1789,6 +1865,10 @@ extern struct aac_common aac_config;
#define DoorBellAdapterNormCmdNotFull (1<<3) /* Adapter -> Host */
#define DoorBellAdapterNormRespNotFull (1<<4) /* Adapter -> Host */
#define DoorBellPrintfReady (1<<5) /* Adapter -> Host */
+#define DoorBellAifPending (1<<6) /* Adapter -> Host */
+
+/* PMC specific outbound doorbell bits */
+#define PmDoorBellResponseSent (1<<1) /* Adapter -> Host */
/*
* For FIB communication, we need all of the following things
@@ -1831,6 +1911,9 @@ extern struct aac_common aac_config;
#define AifReqAPIJobUpdate 109 /* Update a job report from the API */
#define AifReqAPIJobFinish 110 /* Finish a job from the API */
+/* PMC NEW COMM: Request the event data */
+#define AifReqEvent 200
+
/*
* Adapter Initiated FIB command structures. Start with the adapter
* initiated FIBs that really come from the adapter, and get responded
@@ -1886,10 +1969,13 @@ int aac_rx_init(struct aac_dev *dev);
int aac_rkt_init(struct aac_dev *dev);
int aac_nark_init(struct aac_dev *dev);
int aac_sa_init(struct aac_dev *dev);
+int aac_src_init(struct aac_dev *dev);
int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
-unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
+unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
+ int isAif, int isFastResponse,
+ struct hw_fib *aif_fib);
int aac_reset_adapter(struct aac_dev * dev, int forced);
int aac_check_health(struct aac_dev * dev);
int aac_command_thread(void *data);
diff -purN a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
--- a/drivers/scsi/aacraid/commctrl.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/commctrl.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff -purN a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
--- a/drivers/scsi/aacraid/comminit.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/comminit.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -52,12 +53,16 @@ static int aac_alloc_comm(struct aac_dev
unsigned long size, align;
const unsigned long fibsize = 4096;
const unsigned long printfbufsiz = 256;
+ unsigned long host_rrq_size = 0;
struct aac_init *init;
dma_addr_t phys;
unsigned long aac_max_hostphysmempages;
- size = fibsize + sizeof(struct aac_init) + commsize + commalign + printfbufsiz;
-
+ if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1)
+ host_rrq_size = (dev->scsi_host_ptr->can_queue
+ + AAC_NUM_MGT_FIB) * sizeof(u32);
+ size = fibsize + sizeof(struct aac_init) + commsize +
+ commalign + printfbufsiz + host_rrq_size;
base = pci_alloc_consistent(dev->pdev, size, &phys);
@@ -70,8 +75,14 @@ static int aac_alloc_comm(struct aac_dev
dev->comm_phys = phys;
dev->comm_size = size;
- dev->init = (struct aac_init *)(base + fibsize);
- dev->init_pa = phys + fibsize;
+ if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
+ dev->host_rrq = (u32 *)(base + fibsize);
+ dev->host_rrq_pa = phys + fibsize;
+ memset(dev->host_rrq, 0, host_rrq_size);
+ }
+
+ dev->init = (struct aac_init *)(base + fibsize + host_rrq_size);
+ dev->init_pa = phys + fibsize + host_rrq_size;
init = dev->init;
@@ -106,8 +117,13 @@ static int aac_alloc_comm(struct aac_dev
init->InitFlags = 0;
if (dev->comm_interface == AAC_COMM_MESSAGE) {
- init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
+ init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
+ } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
+ init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6);
+ init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_TYPE1_SUPPORTED);
+ dprintk((KERN_WARNING
+ "aacraid: New Comm Interface type1 enabled\n"));
}
init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
INITFLAGS_DRIVER_SUPPORTS_PM);
@@ -115,11 +131,18 @@ static int aac_alloc_comm(struct aac_dev
init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
+ init->MaxNumAif = cpu_to_le32(dev->max_num_aif);
+ init->HostRRQ_AddrHigh = (u32)((u64)dev->host_rrq_pa >> 32);
+ init->HostRRQ_AddrLow = (u32)(dev->host_rrq_pa & 0xffffffff);
+
+
/*
* Increment the base address by the amount already used
*/
- base = base + fibsize + sizeof(struct aac_init);
- phys = (dma_addr_t)((ulong)phys + fibsize + sizeof(struct aac_init));
+ base = base + fibsize + host_rrq_size + sizeof(struct aac_init);
+ phys = (dma_addr_t)((ulong)phys + fibsize + host_rrq_size +
+ sizeof(struct aac_init));
+
/*
* Align the beginning of Headers to commalign
*/
@@ -314,15 +337,22 @@ struct aac_dev *aac_init_adapter(struct
- sizeof(struct aac_write) + sizeof(struct sgentry))
/ sizeof(struct sgentry);
dev->comm_interface = AAC_COMM_PRODUCER;
- dev->raw_io_64 = 0;
+ dev->raw_io_interface = dev->raw_io_64 = 0;
+
if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
(status[0] == 0x00000001)) {
if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64))
dev->raw_io_64 = 1;
- if (dev->a_ops.adapter_comm &&
- (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM)))
- dev->comm_interface = AAC_COMM_MESSAGE;
+ if (dev->a_ops.adapter_comm) {
+ if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE1)) {
+ dev->comm_interface = AAC_COMM_MESSAGE_TYPE1;
+ dev->raw_io_interface = 1;
+ } else if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM)) {
+ dev->comm_interface = AAC_COMM_MESSAGE;
+ dev->raw_io_interface = 1;
+ }
+ }
if ((dev->comm_interface == AAC_COMM_MESSAGE) &&
(status[2] > dev->base_size)) {
aac_adapter_ioremap(dev, 0);
@@ -350,10 +380,12 @@ struct aac_dev *aac_init_adapter(struct
* status[3] & 0xFFFF maximum number FIBs outstanding
*/
host->max_sectors = (status[1] >> 16) << 1;
- dev->max_fib_size = status[1] & 0xFFFF;
+ /* Multiple of 32 for PMC */
+ dev->max_fib_size = status[1] & 0xFFE0;
host->sg_tablesize = status[2] >> 16;
dev->sg_tablesize = status[2] & 0xFFFF;
host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB;
+ dev->max_num_aif = status[4] & 0xFFFF;
/*
* NOTE:
* All these overrides are based on a fixed internal
diff -purN a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
--- a/drivers/scsi/aacraid/commsup.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/commsup.c 2011-03-16 16:38:02.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -63,9 +64,11 @@ static int fib_map_alloc(struct aac_dev
"allocate hardware fibs pci_alloc_consistent(%p, %d * (%d + %d), %p)\n",
dev->pdev, dev->max_fib_size, dev->scsi_host_ptr->can_queue,
AAC_NUM_MGT_FIB, &dev->hw_fib_pa));
- if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, dev->max_fib_size
- * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
- &dev->hw_fib_pa))==NULL)
+ dev->hw_fib_va = pci_alloc_consistent(dev->pdev,
+ (dev->max_fib_size + sizeof(struct aac_fib_xporthdr))
+ * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) + (ALIGN32 - 1),
+ &dev->hw_fib_pa);
+ if (dev->hw_fib_va == NULL)
return -ENOMEM;
return 0;
}
@@ -110,9 +113,22 @@ int aac_fib_setup(struct aac_dev * dev)
if (i<0)
return -ENOMEM;
+ /* 32 byte alignment for PMC */
+ hw_fib_pa = (dev->hw_fib_pa + (ALIGN32 - 1)) & ~(ALIGN32 - 1);
+ dev->hw_fib_va = (struct hw_fib *)((unsigned char *)dev->hw_fib_va +
+ (hw_fib_pa - dev->hw_fib_pa));
+ dev->hw_fib_pa = hw_fib_pa;
+ memset(dev->hw_fib_va, 0,
+ (dev->max_fib_size + sizeof(struct aac_fib_xporthdr)) *
+ (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
+
+ /* add Xport header */
+ dev->hw_fib_va = (struct hw_fib *)((unsigned char *)dev->hw_fib_va +
+ sizeof(struct aac_fib_xporthdr));
+ dev->hw_fib_pa += sizeof(struct aac_fib_xporthdr);
+
hw_fib = dev->hw_fib_va;
hw_fib_pa = dev->hw_fib_pa;
- memset(hw_fib, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
/*
* Initialise the fibs
*/
@@ -129,8 +145,10 @@ int aac_fib_setup(struct aac_dev * dev)
hw_fib->header.XferState = cpu_to_le32(0xffffffff);
hw_fib->header.SenderSize = cpu_to_le16(dev->max_fib_size);
fibptr->hw_fib_pa = hw_fib_pa;
- hw_fib = (struct hw_fib *)((unsigned char *)hw_fib + dev->max_fib_size);
- hw_fib_pa = hw_fib_pa + dev->max_fib_size;
+ hw_fib = (struct hw_fib *)((unsigned char *)hw_fib +
+ dev->max_fib_size + sizeof(struct aac_fib_xporthdr));
+ hw_fib_pa = hw_fib_pa +
+ dev->max_fib_size + sizeof(struct aac_fib_xporthdr);
}
/*
* Add the fib chain to the free list
@@ -664,9 +682,14 @@ int aac_fib_adapter_complete(struct fib
unsigned long nointr = 0;
unsigned long qflags;
+ if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
+ kfree(hw_fib);
+ return 0;
+ }
+
if (hw_fib->header.XferState == 0) {
if (dev->comm_interface == AAC_COMM_MESSAGE)
- kfree (hw_fib);
+ kfree(hw_fib);
return 0;
}
/*
@@ -674,7 +697,7 @@ int aac_fib_adapter_complete(struct fib
*/
if (hw_fib->header.StructType != FIB_MAGIC) {
if (dev->comm_interface == AAC_COMM_MESSAGE)
- kfree (hw_fib);
+ kfree(hw_fib);
return -EINVAL;
}
/*
diff -purN a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
--- a/drivers/scsi/aacraid/dpcsup.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/dpcsup.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -228,6 +229,48 @@ unsigned int aac_command_normal(struct a
return 0;
}
+/*
+ *
+ * aac_aif_callback
+ * @context: the context set in the fib - here it is scsi cmd
+ * @fibptr: pointer to the fib
+ *
+ * Handles the AIFs - new method (SRC)
+ *
+ */
+
+static void aac_aif_callback(void *context, struct fib * fibptr)
+{
+ struct fib *fibctx;
+ struct aac_dev *dev;
+ struct aac_aifcmd *cmd;
+ int status;
+
+ fibctx = (struct fib *)context;
+ BUG_ON(fibptr == NULL);
+ dev = fibptr->dev;
+
+ if (fibptr->hw_fib_va->header.XferState &
+ cpu_to_le32(NoMoreAifDataAvailable)) {
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ return;
+ }
+
+ aac_intr_normal(dev, 0, 1, 0, fibptr->hw_fib_va);
+
+ aac_fib_init(fibctx);
+ cmd = (struct aac_aifcmd *) fib_data(fibctx);
+ cmd->command = cpu_to_le32(AifReqEvent);
+
+ status = aac_fib_send(AifRequest,
+ fibctx,
+ sizeof(struct hw_fib)-sizeof(struct aac_fibhdr),
+ FsaNormal,
+ 0, 1,
+ (fib_callback)aac_aif_callback, fibctx);
+}
+
/**
* aac_intr_normal - Handle command replies
@@ -238,19 +281,17 @@ unsigned int aac_command_normal(struct a
* know there is a response on our normal priority queue. We will pull off
* all QE there are and wake up all the waiters before exiting.
*/
-
-unsigned int aac_intr_normal(struct aac_dev * dev, u32 index)
+unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
+ int isAif, int isFastResponse, struct hw_fib *aif_fib)
{
unsigned long mflags;
dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index));
- if ((index & 0x00000002L)) {
+ if (isAif == 1) { /* AIF - common */
struct hw_fib * hw_fib;
struct fib * fib;
struct aac_queue *q = &dev->queues->queue[HostNormCmdQueue];
unsigned long flags;
- if (index == 0xFFFFFFFEL) /* Special Case */
- return 0; /* Do nothing */
/*
* Allocate a FIB. For non queued stuff we can just use
* the stack so we are happy. We need a fib object in order to
@@ -263,8 +304,13 @@ unsigned int aac_intr_normal(struct aac_
kfree (fib);
return 1;
}
- memcpy(hw_fib, (struct hw_fib *)(((uintptr_t)(dev->regs.sa)) +
- (index & ~0x00000002L)), sizeof(struct hw_fib));
+ if (aif_fib != NULL) {
+ memcpy(hw_fib, aif_fib, sizeof(struct hw_fib));
+ } else {
+ memcpy(hw_fib,
+ (struct hw_fib *)(((uintptr_t)(dev->regs.sa)) +
+ index), sizeof(struct hw_fib));
+ }
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof(struct fib);
@@ -277,9 +323,26 @@ unsigned int aac_intr_normal(struct aac_
wake_up_interruptible(&q->cmdready);
spin_unlock_irqrestore(q->lock, flags);
return 1;
+ } else if (isAif == 2) { /* AIF - new (SRC) */
+ struct fib *fibctx;
+ struct aac_aifcmd *cmd;
+
+ fibctx = aac_fib_alloc(dev);
+ if (!fibctx)
+ return 1;
+ aac_fib_init(fibctx);
+
+ cmd = (struct aac_aifcmd *) fib_data(fibctx);
+ cmd->command = cpu_to_le32(AifReqEvent);
+
+ return aac_fib_send(AifRequest,
+ fibctx,
+ sizeof(struct hw_fib)-sizeof(struct aac_fibhdr),
+ FsaNormal,
+ 0, 1,
+ (fib_callback)aac_aif_callback, fibctx);
} else {
- int fast = index & 0x01;
- struct fib * fib = &dev->fibs[index >> 2];
+ struct fib *fib = &dev->fibs[index];
struct hw_fib * hwfib = fib->hw_fib_va;
/*
@@ -298,7 +361,7 @@ unsigned int aac_intr_normal(struct aac_
return 0;
}
- if (fast) {
+ if (isFastResponse) {
/*
* Doctor the fib
*/
diff -purN a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
--- a/drivers/scsi/aacraid/linit.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/linit.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -54,7 +55,7 @@
#include "aacraid.h"
-#define AAC_DRIVER_VERSION "1.1-5"
+#define AAC_DRIVER_VERSION "1.1-7"
#ifndef AAC_DRIVER_BRANCH
#define AAC_DRIVER_BRANCH ""
#endif
@@ -161,6 +162,7 @@ static const struct pci_device_id aac_pc
{ 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 59 }, /* Adaptec Catch All */
{ 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 60 }, /* Adaptec Rocket Catch All */
{ 0x9005, 0x0288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 61 }, /* Adaptec NEMER/ARK Catch All */
+ { 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Catch All */
{ 0,}
};
MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
@@ -235,7 +237,8 @@ static struct aac_driver_ident aac_drive
{ aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend Catchall */
{ aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */
- { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec NEMER/ARK Catch All */
+ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */
+ { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Catch All */
};
/**
@@ -653,8 +656,10 @@ static int aac_eh_reset(struct scsi_cmnd
* This adapter needs a blind reset, only do so for Adapters that
* support a register, instead of a commanded, reset.
*/
- if ((aac->supplement_adapter_info.SupportedOptions2 &
- AAC_OPTION_MU_RESET) &&
+ if (((aac->supplement_adapter_info.SupportedOptions2 &
+ AAC_OPTION_MU_RESET) ||
+ (aac->supplement_adapter_info.SupportedOptions2 &
+ AAC_OPTION_DOORBELL_RESET)) &&
aac_check_reset &&
((aac_check_reset != 1) ||
!(aac->supplement_adapter_info.SupportedOptions2 &
diff -purN a/drivers/scsi/aacraid/Makefile b/drivers/scsi/aacraid/Makefile
--- a/drivers/scsi/aacraid/Makefile 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/Makefile 2011-03-16 16:30:58.000000000 +0530
@@ -3,6 +3,6 @@
obj-$(CONFIG_SCSI_AACRAID) := aacraid.o
aacraid-objs := linit.o aachba.o commctrl.o comminit.o commsup.o \
- dpcsup.o rx.o sa.o rkt.o nark.o
+ dpcsup.o rx.o sa.o rkt.o nark.o src.o
EXTRA_CFLAGS := -Idrivers/scsi
diff -purN a/drivers/scsi/aacraid/nark.c b/drivers/scsi/aacraid/nark.c
--- a/drivers/scsi/aacraid/nark.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/nark.c 2011-03-16 16:30:58.000000000 +0530
@@ -4,7 +4,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2006-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff -purN a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
--- a/drivers/scsi/aacraid/rkt.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/rkt.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff -purN a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
--- a/drivers/scsi/aacraid/rx.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/rx.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -84,15 +85,35 @@ static irqreturn_t aac_rx_intr_producer(
static irqreturn_t aac_rx_intr_message(int irq, void *dev_id)
{
+ int isAif, isFastResponse, isSpecial;
struct aac_dev *dev = dev_id;
u32 Index = rx_readl(dev, MUnit.OutboundQueue);
if (unlikely(Index == 0xFFFFFFFFL))
Index = rx_readl(dev, MUnit.OutboundQueue);
if (likely(Index != 0xFFFFFFFFL)) {
do {
- if (unlikely(aac_intr_normal(dev, Index))) {
- rx_writel(dev, MUnit.OutboundQueue, Index);
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
+ isAif = isFastResponse = isSpecial = 0;
+ if (Index & 0x00000002L) {
+ isAif = 1;
+ if (Index == 0xFFFFFFFEL)
+ isSpecial = 1;
+ Index &= ~0x00000002L;
+ } else {
+ if (Index & 0x00000001L)
+ isFastResponse = 1;
+ Index >>= 2;
+ }
+ if (!isSpecial) {
+ if (unlikely(aac_intr_normal(dev,
+ Index, isAif,
+ isFastResponse, NULL))) {
+ rx_writel(dev,
+ MUnit.OutboundQueue,
+ Index);
+ rx_writel(dev,
+ MUnit.ODR,
+ DoorBellAdapterNormRespReady);
+ }
}
Index = rx_readl(dev, MUnit.OutboundQueue);
} while (Index != 0xFFFFFFFFL);
@@ -631,6 +652,10 @@ int _aac_rx_init(struct aac_dev *dev)
name, instance);
goto error_iounmap;
}
+ dev->dbg_base = dev->scsi_host_ptr->base;
+ dev->dbg_base_mapped = dev->base;
+ dev->dbg_size = dev->base_size;
+
aac_adapter_enable_int(dev);
/*
* Tell the adapter that all is configured, and it can
diff -purN a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
--- a/drivers/scsi/aacraid/sa.c 2011-03-11 14:16:36.000000000 +0530
+++ b/drivers/scsi/aacraid/sa.c 2011-03-16 16:30:58.000000000 +0530
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@xxxxxxxxxxx)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -391,6 +392,10 @@ int aac_sa_init(struct aac_dev *dev)
name, instance);
goto error_iounmap;
}
+ dev->dbg_base = dev->scsi_host_ptr->base;
+ dev->dbg_base_mapped = dev->base;
+ dev->dbg_size = dev->base_size;
+
aac_adapter_enable_int(dev);
/*
diff -purN a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
--- a/drivers/scsi/aacraid/src.c 1970-01-01 05:30:00.000000000 +0530
+++ b/drivers/scsi/aacraid/src.c 2011-03-16 16:44:27.000000000 +0530
@@ -0,0 +1,594 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc.
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@xxxxxxxxxxxxxx)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * src.c
+ *
+ * Abstract: Hardware Device Interface for PMC SRC based controllers
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <linux/completion.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
+{
+ struct aac_dev *dev = dev_id;
+ unsigned long bellbits, bellbits_shifted;
+ int our_interrupt = 0;
+ int isFastResponse;
+ u32 index, handle;
+
+ bellbits = src_readl(dev, MUnit.ODR_R);
+ if (bellbits & PmDoorBellResponseSent) {
+ bellbits = PmDoorBellResponseSent;
+ /* handle async. status */
+ our_interrupt = 1;
+ index = dev->host_rrq_idx;
+ if (dev->host_rrq[index] == 0) {
+ u32 old_index = index;
+ /* adjust index */
+ do {
+ index++;
+ if (index == dev->scsi_host_ptr->can_queue +
+ AAC_NUM_MGT_FIB)
+ index = 0;
+ if (dev->host_rrq[index] != 0)
+ break;
+ } while (index != old_index);
+ dev->host_rrq_idx = index;
+ }
+ for (;;) {
+ isFastResponse = 0;
+ /* remove toggle bit (31) */
+ handle = (dev->host_rrq[index] & 0x7fffffff);
+ /* check fast response bit (30) */
+ if (handle & 0x40000000)
+ isFastResponse = 1;
+ handle &= 0x0000ffff;
+ if (handle == 0)
+ break;
+
+ aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
+
+ dev->host_rrq[index++] = 0;
+ if (index == dev->scsi_host_ptr->can_queue +
+ AAC_NUM_MGT_FIB)
+ index = 0;
+ dev->host_rrq_idx = index;
+ }
+ } else {
+ bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
+ if (bellbits_shifted & DoorBellAifPending) {
+ our_interrupt = 1;
+ /* handle AIF */
+ aac_intr_normal(dev, 0, 2, 0, NULL);
+ }
+ }
+
+ if (our_interrupt) {
+ src_writel(dev, MUnit.ODR_C, bellbits);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+/**
+ * aac_src_disable_interrupt - Disable interrupts
+ * @dev: Adapter
+ */
+
+static void aac_src_disable_interrupt(struct aac_dev *dev)
+{
+ src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
+}
+
+/**
+ * aac_src_enable_interrupt_message - Enable interrupts
+ * @dev: Adapter
+ */
+
+static void aac_src_enable_interrupt_message(struct aac_dev *dev)
+{
+ src_writel(dev, MUnit.OIMR, dev->OIMR = 0xfffffff8);
+}
+
+/**
+ * src_sync_cmd - send a command and wait
+ * @dev: Adapter
+ * @command: Command to execute
+ * @p1: first parameter
+ * @ret: adapter status
+ *
+ * This routine will send a synchronous command to the adapter and wait
+ * for its completion.
+ */
+
+static int src_sync_cmd(struct aac_dev *dev, u32 command,
+ u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
+ u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
+{
+ unsigned long start;
+ int ok;
+
+ /*
+ * Write the command into Mailbox 0
+ */
+ writel(command, &dev->IndexRegs->Mailbox[0]);
+ /*
+ * Write the parameters into Mailboxes 1 - 6
+ */
+ writel(p1, &dev->IndexRegs->Mailbox[1]);
+ writel(p2, &dev->IndexRegs->Mailbox[2]);
+ writel(p3, &dev->IndexRegs->Mailbox[3]);
+ writel(p4, &dev->IndexRegs->Mailbox[4]);
+
+ /*
+ * Clear the synch command doorbell to start on a clean slate.
+ */
+ src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+
+ /*
+ * Disable doorbell interrupts
+ */
+ src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
+
+ /*
+ * Force the completion of the mask register write before issuing
+ * the interrupt.
+ */
+ src_readl(dev, MUnit.OIMR);
+
+ /*
+ * Signal that there is a new synch command
+ */
+ src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
+
+ ok = 0;
+ start = jiffies;
+
+ /*
+ * Wait up to 30 seconds
+ */
+ while (time_before(jiffies, start+30*HZ)) {
+ /* Delay 5 microseconds to let Mon960 get info. */
+ udelay(5);
+
+ /* Mon960 will set doorbell0 bit
+ * when it has completed the command
+ */
+ if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) {
+ /* Clear the doorbell */
+ src_writel(dev,
+ MUnit.ODR_C,
+ OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+ ok = 1;
+ break;
+ }
+
+ /* Yield the processor in case we are slow */
+ msleep(1);
+ }
+ if (unlikely(ok != 1)) {
+ /* Restore interrupt mask even though we timed out */
+ aac_adapter_enable_int(dev);
+ return -ETIMEDOUT;
+ }
+
+ /* Pull the synch status from Mailbox 0 */
+ if (status)
+ *status = readl(&dev->IndexRegs->Mailbox[0]);
+ if (r1)
+ *r1 = readl(&dev->IndexRegs->Mailbox[1]);
+ if (r2)
+ *r2 = readl(&dev->IndexRegs->Mailbox[2]);
+ if (r3)
+ *r3 = readl(&dev->IndexRegs->Mailbox[3]);
+ if (r4)
+ *r4 = readl(&dev->IndexRegs->Mailbox[4]);
+
+ /* Clear the synch command doorbell */
+ src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+
+ /* Restore interrupt mask */
+ aac_adapter_enable_int(dev);
+ return 0;
+
+}
+
+/**
+ * aac_src_interrupt_adapter - interrupt adapter
+ * @dev: Adapter
+ *
+ * Send an interrupt to the i960 and breakpoint it.
+ */
+
+static void aac_src_interrupt_adapter(struct aac_dev *dev)
+{
+ src_sync_cmd(dev, BREAKPOINT_REQUEST,
+ 0, 0, 0, 0, 0, 0,
+ NULL, NULL, NULL, NULL, NULL);
+}
+
+/**
+ * aac_src_notify_adapter - send an event to the adapter
+ * @dev: Adapter
+ * @event: Event to send
+ *
+ * Notify the i960 that something it probably cares about has
+ * happened.
+ */
+
+static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
+{
+ switch (event) {
+
+ case AdapNormCmdQue:
+ src_writel(dev, MUnit.ODR_C,
+ INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
+ break;
+ case HostNormRespNotFull:
+ src_writel(dev, MUnit.ODR_C,
+ INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
+ break;
+ case AdapNormRespQue:
+ src_writel(dev, MUnit.ODR_C,
+ INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
+ break;
+ case HostNormCmdNotFull:
+ src_writel(dev, MUnit.ODR_C,
+ INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
+ break;
+ case FastIo:
+ src_writel(dev, MUnit.ODR_C,
+ INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
+ break;
+ case AdapPrintfDone:
+ src_writel(dev, MUnit.ODR_C,
+ INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
+ break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+/**
+ * aac_src_start_adapter - activate adapter
+ * @dev: Adapter
+ *
+ * Start up processing on an i960 based AAC adapter
+ */
+
+static void aac_src_start_adapter(struct aac_dev *dev)
+{
+ struct aac_init *init;
+
+ init = dev->init;
+ init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+
+ /* We can only use a 32 bit address here */
+ src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
+ 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+}
+
+/**
+ * aac_src_check_health
+ * @dev: device to check if healthy
+ *
+ * Will attempt to determine if the specified adapter is alive and
+ * capable of handling requests, returning 0 if alive.
+ */
+static int aac_src_check_health(struct aac_dev *dev)
+{
+ u32 status = src_readl(dev, MUnit.OMR);
+
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ if (unlikely(status & SELF_TEST_FAILED))
+ return -1;
+
+ /*
+ * Check to see if the board panic'd.
+ */
+ if (unlikely(status & KERNEL_PANIC))
+ return (status >> 16) & 0xFF;
+ /*
+ * Wait for the adapter to be up and running.
+ */
+ if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
+ return -3;
+ /*
+ * Everything is OK
+ */
+ return 0;
+}
+
+/**
+ * aac_src_deliver_message
+ * @fib: fib to issue
+ *
+ * Will send a fib, returning 0 if successful.
+ */
+static int aac_src_deliver_message(struct fib *fib)
+{
+ struct aac_dev *dev = fib->dev;
+ struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
+ unsigned long qflags;
+ u32 fibsize;
+ u64 address;
+ struct aac_fib_xporthdr *pFibX;
+
+ spin_lock_irqsave(q->lock, qflags);
+ q->numpending++;
+ spin_unlock_irqrestore(q->lock, qflags);
+
+ /* Calculate the amount to the fibsize bits */
+ fibsize = (sizeof(struct aac_fib_xporthdr) +
+ fib->hw_fib_va->header.Size + 127) / 128 - 1;
+ if (fibsize > (ALIGN32 - 1))
+ fibsize = ALIGN32 - 1;
+
+ /* Fill XPORT header */
+ pFibX = (struct aac_fib_xporthdr *)
+ ((unsigned char *)fib->hw_fib_va -
+ sizeof(struct aac_fib_xporthdr));
+ pFibX->Handle = fib->hw_fib_va->header.SenderData + 1;
+ pFibX->HostAddress = fib->hw_fib_pa;
+ pFibX->Size = fib->hw_fib_va->header.Size;
+ address = fib->hw_fib_pa - (u64)sizeof(struct aac_fib_xporthdr);
+
+ src_writel(dev, MUnit.IQ_H, (u32)(address >> 32));
+ src_writel(dev, MUnit.IQ_L, (u32)(address & 0xffffffff) + fibsize);
+ return 0;
+}
+
+/**
+ * aac_src_ioremap
+ * @size: mapping resize request
+ *
+ */
+static int aac_src_ioremap(struct aac_dev *dev, u32 size)
+{
+ if (!size) {
+ iounmap(dev->regs.src.bar0);
+ dev->regs.src.bar0 = NULL;
+ iounmap(dev->base);
+ dev->base = NULL;
+ return 0;
+ }
+ dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
+ AAC_MIN_SRC_BAR1_SIZE);
+ dev->base = NULL;
+ if (dev->regs.src.bar1 == NULL)
+ return -1;
+ dev->base = dev->regs.src.bar0 = ioremap(dev->scsi_host_ptr->base,
+ size);
+ if (dev->base == NULL) {
+ iounmap(dev->regs.src.bar1);
+ dev->regs.src.bar1 = NULL;
+ return -1;
+ }
+ dev->IndexRegs = &((struct src_registers __iomem *)
+ dev->base)->IndexRegs;
+ return 0;
+}
+
+static int aac_src_restart_adapter(struct aac_dev *dev, int bled)
+{
+ u32 var, reset_mask;
+
+ if (bled >= 0) {
+ if (bled)
+ printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
+ dev->name, dev->id, bled);
+ bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
+ 0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL);
+ if (bled || (var != 0x00000001))
+ bled = -EINVAL;
+ if (dev->supplement_adapter_info.SupportedOptions2 &
+ AAC_OPTION_DOORBELL_RESET) {
+ src_writel(dev, MUnit.IDR, reset_mask);
+ msleep(5000); /* Delay 5 seconds */
+ }
+ }
+
+ if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
+ return -ENODEV;
+
+ if (startup_timeout < 300)
+ startup_timeout = 300;
+
+ return 0;
+}
+
+/**
+ * aac_src_select_comm - Select communications method
+ * @dev: Adapter
+ * @comm: communications method
+ */
+int aac_src_select_comm(struct aac_dev *dev, int comm)
+{
+ switch (comm) {
+ case AAC_COMM_MESSAGE:
+ dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
+ dev->a_ops.adapter_intr = aac_src_intr_message;
+ dev->a_ops.adapter_deliver = aac_src_deliver_message;
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * aac_src_init - initialize an Cardinal Frey Bar card
+ * @dev: device to configure
+ *
+ */
+
+int aac_src_init(struct aac_dev *dev)
+{
+ unsigned long start;
+ unsigned long status;
+ int restart = 0;
+ int instance = dev->id;
+ const char *name = dev->name;
+
+ dev->a_ops.adapter_ioremap = aac_src_ioremap;
+ dev->a_ops.adapter_comm = aac_src_select_comm;
+
+ dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
+ if (aac_adapter_ioremap(dev, dev->base_size)) {
+ printk(KERN_WARNING "%s: unable to map adapter.\n", name);
+ goto error_iounmap;
+ }
+
+ /* Failure to reset here is an option ... */
+ dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+ dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+ if ((aac_reset_devices || reset_devices) &&
+ !aac_src_restart_adapter(dev, 0))
+ ++restart;
+ /*
+ * Check to see if the board panic'd while booting.
+ */
+ status = src_readl(dev, MUnit.OMR);
+ if (status & KERNEL_PANIC) {
+ if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
+ goto error_iounmap;
+ ++restart;
+ }
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ status = src_readl(dev, MUnit.OMR);
+ if (status & SELF_TEST_FAILED) {
+ printk(KERN_ERR "%s%d: adapter self-test failed.\n",
+ dev->name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the monitor panic'd while booting.
+ */
+ if (status & MONITOR_PANIC) {
+ printk(KERN_ERR "%s%d: adapter monitor panic.\n",
+ dev->name, instance);
+ goto error_iounmap;
+ }
+ start = jiffies;
+ /*
+ * Wait for the adapter to be up and running. Wait up to 3 minutes
+ */
+ while (!((status = src_readl(dev, MUnit.OMR)) &
+ KERNEL_UP_AND_RUNNING)) {
+ if ((restart &&
+ (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
+ time_after(jiffies, start+HZ*startup_timeout)) {
+ printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
+ dev->name, instance, status);
+ goto error_iounmap;
+ }
+ if (!restart &&
+ ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
+ time_after(jiffies, start + HZ *
+ ((startup_timeout > 60)
+ ? (startup_timeout - 60)
+ : (startup_timeout / 2))))) {
+ if (likely(!aac_src_restart_adapter(dev,
+ aac_src_check_health(dev))))
+ start = jiffies;
+ ++restart;
+ }
+ msleep(1);
+ }
+ if (restart && aac_commit)
+ aac_commit = 1;
+ /*
+ * Fill in the common function dispatch table.
+ */
+ dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
+ dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
+ dev->a_ops.adapter_notify = aac_src_notify_adapter;
+ dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+ dev->a_ops.adapter_check_health = aac_src_check_health;
+ dev->a_ops.adapter_restart = aac_src_restart_adapter;
+
+ /*
+ * First clear out all interrupts. Then enable the one's that we
+ * can handle.
+ */
+ aac_adapter_comm(dev, AAC_COMM_MESSAGE);
+ aac_adapter_disable_int(dev);
+ src_writel(dev, MUnit.ODR_C, 0xffffffff);
+ aac_adapter_enable_int(dev);
+
+ if (aac_init_adapter(dev) == NULL)
+ goto error_iounmap;
+ if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
+ goto error_iounmap;
+
+ dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+
+ if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+ IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
+
+ if (dev->msi)
+ pci_disable_msi(dev->pdev);
+
+ printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+ name, instance);
+ goto error_iounmap;
+ }
+ dev->dbg_base = pci_resource_start(dev->pdev, 2);
+ dev->dbg_base_mapped = dev->regs.src.bar1;
+ dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
+
+ aac_adapter_enable_int(dev);
+ /*
+ * Tell the adapter that all is configured, and it can
+ * start accepting requests
+ */
+ aac_src_start_adapter(dev);
+
+ return 0;
+
+error_iounmap:
+
+ return -1;
+}
Regards - Mahesh Rajashekhara
Attachment:
AACRAID-Series6.patch
Description: AACRAID-Series6.patch
