On 10/25/2010 04:09 PM, Louis-David Mitterrand wrote: > On Mon, Oct 25, 2010 at 08:02:22AM -0600, Yang, Bo wrote: >> You also can use ctrl^H during the controller post to configure the JBOD. > > Unfortuntely I found no way to configure disks in JBOD mode through the > adapter bios. A google search seems to indicate other users have the > same problem. > > Apparently a firmware change (to "initiator and target" mode) is > required to turn that adapter's into a simple non-raid SATA controller > but I couldn't find it anywhere. > Bzzt. Nope. IT firmware is for the 'plain' mptsas (LSI SAS 1078) only. PERC6/i is based upon the 'Megaraid' SAS 1078, which is using the same SAS chip but has an additional (hardware) RAID controller. You cannot change the firmware here. And yes, megacli is notoriously tricky to invoke. It really needs to get used to. Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage hare@xxxxxxx +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
