RE: using a PERC6/i (MegaRaid SAS 1078) in JBOD mode?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



You need use LSI application to configure the JBOD before to use it.

-----Original Message-----
From: linux-scsi-owner@xxxxxxxxxxxxxxx [mailto:linux-scsi-owner@xxxxxxxxxxxxxxx] On Behalf Of Louis-David Mitterrand
Sent: Saturday, October 23, 2010 5:58 AM
To: linux-scsi@xxxxxxxxxxxxxxx
Subject: using a PERC6/i (MegaRaid SAS 1078) in JBOD mode?

Hi,

On a Dell PowerEdge 2900 III I have a PERC6/i (MegaRaid SAS 1078). From
the controller bios is seems I have to create a "raid0 virtual drive"
for each physical disk or in order for them to appear in Linux.

As I intend to use none of that controller's raid features, is it at all
possible to switch it to plain JBOD mode?

Thanks,
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux