https://bugzilla.kernel.org/show_bug.cgi?id=16070 Summary: Fail to issue Start/Stop Unit Product: IO/Storage Version: 2.5 Kernel Version: 2.6.34-rc5 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: SCSI AssignedTo: linux-scsi@xxxxxxxxxxxxxxx ReportedBy: ian@xxxxxxxxxxxxxxxxxxxxx Regression: No I am attempting to save power by spinning down idle scsi disks. These are old fashioned parallel (U320) disks on a SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07). I do: sg_start --stop /dev/sde echo 0xfffffff > /sys/module/scsi_mod/parameters/scsi_logging_level dd if=/dev/sde of=/dev/null count=1 sleep 10 echo 0 > /sys/module/scsi_mod/parameters/scsi_logging_level I get: dd: reading `/dev/sde': Input/output error 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.00536828 s, 0.0 kB/s If I manually spin up the disk with sg_start --start /dev/sde, then things work again as expected. The relevant log is as follows: May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_open May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_init_command: block=0, count=32 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] block=0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] reading 32/32 512 byte blocks. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 20 00 May 28 23:55:13 fs kernel: buffer = 0xe37726e0, bufflen = 16384, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 20 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 8000002) May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_done: sb[respc,sk,asc,ascq]=70,2,4,2 May 28 23:55:13 fs kernel: 32 sectors total, 0 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Device not ready May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 20 00 May 28 23:55:13 fs kernel: end_request: I/O error, dev sde, sector 0 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 0 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 1 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 2 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 3 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_init_command: block=0, count=8 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] block=0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] reading 8/8 512 byte blocks. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: buffer = 0xe37726e0, bufflen = 4096, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 8000002) May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_done: sb[respc,sk,asc,ascq]=70,2,4,2 May 28 23:55:13 fs kernel: 8 sectors total, 0 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Device not ready May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: end_request: I/O error, dev sde, sector 0 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_release May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_open May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Inquiry: 12 00 00 00 fe 00 May 28 23:55:13 fs kernel: buffer = 0xe37726e0, bufflen = 254, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Inquiry: 12 00 00 00 fe 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 0) May 28 23:55:13 fs kernel: 0 sectors total, 254 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_release May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_open May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Inquiry: 12 01 00 00 fe 00 May 28 23:55:13 fs kernel: buffer = 0xe37726e0, bufflen = 254, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Inquiry: 12 01 00 00 fe 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 0) May 28 23:55:13 fs kernel: 0 sectors total, 254 bytes done. May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Inquiry: 12 01 80 00 fe 00 May 28 23:55:13 fs kernel: buffer = 0xe37726e0, bufflen = 254, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Inquiry: 12 01 80 00 fe 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 0) May 28 23:55:13 fs kernel: 0 sectors total, 254 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_release May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_open May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_init_command: block=0, count=256 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] block=0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] reading 256/256 512 byte blocks. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 01 00 00 May 28 23:55:13 fs kernel: buffer = 0xf70faa00, bufflen = 131072, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 01 00 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 8000002) May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_done: sb[respc,sk,asc,ascq]=70,2,4,2 May 28 23:55:13 fs kernel: 256 sectors total, 0 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Device not ready May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 01 00 00 May 28 23:55:13 fs kernel: end_request: I/O error, dev sde, sector 0 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 0 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 1 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 2 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 3 May 28 23:55:13 fs kernel: Buffer I/O error on device sde, logical block 4 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_init_command: block=0, count=8 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] block=0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] reading 8/8 512 byte blocks. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: buffer = 0xe37726e0, bufflen = 4096, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 8000002) May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_done: sb[respc,sk,asc,ascq]=70,2,4,2 May 28 23:55:13 fs kernel: 8 sectors total, 0 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Device not ready May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: end_request: I/O error, dev sde, sector 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_release May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_open May 28 23:55:13 fs kernel: scsi_block_when_processing_errors: rtn: 1 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_init_command: block=0, count=256 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] block=0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] reading 256/256 512 byte blocks. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 01 00 00 May 28 23:55:13 fs kernel: buffer = 0xf70faa00, bufflen = 131072, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 01 00 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 8000002) May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_done: sb[respc,sk,asc,ascq]=70,2,4,2 May 28 23:55:13 fs kernel: 256 sectors total, 0 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Device not ready May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 01 00 00 May 28 23:55:13 fs kernel: end_request: I/O error, dev sde, sector 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_init_command: block=0, count=8 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] block=0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] reading 8/8 512 byte blocks. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Send: 0xe3772780 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: buffer = 0xe37726e0, bufflen = 4096, queuecommand 0xf81773c6 May 28 23:55:13 fs kernel: leaving scsi_dispatch_cmnd() May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Done: 0xe3772780 SUCCESS May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_OK May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] scsi host busy 1 failed 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: Notifying upper driver of completion (result 8000002) May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_done: sb[respc,sk,asc,ascq]=70,2,4,2 May 28 23:55:13 fs kernel: 8 sectors total, 0 bytes done. May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Device not ready May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Sense Key : Not Ready [current] May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] Add. Sense: Logical unit not ready, initializing command required May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 May 28 23:55:13 fs kernel: end_request: I/O error, dev sde, sector 0 May 28 23:55:13 fs kernel: sd 6:0:0:0: [sde] sd_release May 28 23:55:14 fs kernel: scsi_block_when_processing_errors: rtn: 1 After getting: "Add. Sense: Logical unit not ready, initializing command required" I would expect a Start/Stop unit command, but it appears that none is ever issued. -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
