Re: System hangs when using USB 3.0 HD with on Ubuntu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2010-05-12 at 11:09 -0400, Alan Stern wrote:
> On Wed, 12 May 2010, Mark Lord wrote:
> 
> > The sticky part is that hdparm explicitly asked for sense data.
> > 
> > But the results were marked as "no sense data".  Many of the commands
> > sent by hdparm _require_ "sense data" (ATA register values) in order
> > to see the results.  The USB driver appears to ignore that request
> > when it sees good device status from the original command.  Bug.
> 
> This sounds like it is a bug in the SCSI midlayer, not in usb-storage.  

I don't think so ... we'll return sense if sense is present (i.e. the
device returned CHECK CONDITION).

> There is no mechanism for the midlayer to tell low-level drivers like
> usb-storage that sense data must be returned.  The documentation in
> include/scsi/scsi_cmnd.h merely states that the sense buffer should be
> filled when CHECK CONDITION is received for the original command.  
> Ditto for Documentation/scsi/scsi_mid_low_api.txt.  Hence if sense data
> is needed even in the absence of CHECK CONDITION, the midlayer must
> explicitly send a command to retrieve it.

Sense data is never returned in the absence of CHECK CONDITION.  This is
what SAT says has to happen if you set CK_COND in ATA(12/16):

        The CK_COND (Check Condition) bit may be used to request the
        SATL to
        return a copy of ATA register information in the sense data upon
        command completion. If the CK_COND bit is set to one the SATL
        shall
        return a status of CHECK CONDITION when the ATA command
        completes,
        even if the command completes successfully, and return the ATA
        Normal Output fields (see ATA8-ACS) in the sense data using the
        ATA Return descriptor (see 12.2.6). If the CK_COND bit is set to
        zero, then the SATL shall terminate the command with CHECK
        CONDITION status only if an error occurs in processing the
        command. See clause 11 for a description of ATA error
        conditions.
        
James

> What mechanism does hdparm use to submit its I/O requests, and how does 
> it indicate that it requires sense data?
> 
> Alan Stern
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux