[Bug 14831] mptsas - Use of ATA command pass-through results in unreliable operation - drive / controller resets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=14831





--- Comment #13 from Brian Sullivan <bexamous@xxxxxxxxx>  2010-04-29 07:25:25 ---
This issue seems to get no attention.  I would be happy to go buy some other
HBA controller but 1068E is used everywhere, I can't figure out what to buy as
an alternative.

Is this a firmware bug?  There is a billion firmwares for the 1068E, I'm stuck
with an onboard controller and not sure if its possible to update the firmware.
 Would it be worth buying some addin card to be able to try different
firmwares?

Does LSI care about this?  If not, fine.  If so, is the problem you cannot
reproduce it?

If you google a bit you can find many people running into this bug.

Argh, I'm so frustrated.

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux