[BNX2I] instruct firmware to use driver/iscsid provided expected statsn field while constructing login pdu header. * Initialize 'flags' to instruct chip to use driver/iscsid provided ExpStatSN value while constructing iSCSI login PDU header Signed-off-by: Eddie Wai <waie@xxxxxxxxxxxx> Signed-off-by: Anil Veerabhadrappa <anilgv@xxxxxxxxxxxx> --- drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 1af578d..d5d8234 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -346,6 +346,7 @@ int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn, login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn); login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn); + login_wqe->flags = ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN; login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma; login_wqe->resp_bd_list_addr_hi = @@ -355,7 +356,6 @@ int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn, (bnx2i_conn->gen_pdu.resp_buf_size << ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT)); login_wqe->resp_buffer = dword; - login_wqe->flags = 0; login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma; login_wqe->bd_list_addr_hi = (u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32); -- 1.6.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
