From: Joe Eykholt <jeykholt@xxxxxxxxx> The method we've been using for point-to-point mode requires that the LS_ACC for the FLOGI uses the D_ID and S_ID assigned to the remote port and local port, not those in the exchange. This is not the correct method, but for now, it's what works with the old target, as well as with new targets based on libfc. This patch changes the addresses used accordingly. Signed-off-by: Joe Eykholt <jeykholt@xxxxxxxxx> Signed-off-by: Robert Love <robert.w.love@xxxxxxxxx> --- drivers/scsi/libfc/fc_lport.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index af7343a..02e6302 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -834,7 +834,7 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in, */ f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ; ep = fc_seq_exch(sp); - fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, remote_fid, local_fid, FC_TYPE_ELS, f_ctl, 0); lport->tt.seq_send(lport, sp, fp); -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
