http://bugzilla.kernel.org/show_bug.cgi?id=15503 Summary: insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting Product: SCSI Drivers Version: 2.5 Kernel Version: linux-2.6.33-git15 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: high Priority: P1 Component: Other AssignedTo: scsi_drivers-other@xxxxxxxxxxxxxxxxxxxx ReportedBy: wlgivens@xxxxxxxxx Regression: No Compiling and installing kernel... error below is what I received on restart: [root@jericho ~]# cat /etc/aboot.conf # aboot default configurations # NOTICE: You have a /boot partition. This means that # all kernel paths are relative to /boot/ 0:1/vmlinuz-2.6.17-1.2187_FC5.6axp initrd=/initrd-2.6.17-1.2187_FC5.6axp.img root=/dev/VolGroup00/LogVol00 selinux=off console=ttyS0 1:1/linux-2.6/vmlinuz-2.6.33-git15 initrd=/initrd-2.6.17-1.2187_FC5.6axp.img root=/dev/VolGroup00/LogVol00 selinux=off console=ttyS0 Configured with: ../gcc-4.4.2/configure --build=alpha-alpha-linux --host=alpha-alpha-linux --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran --disable-dssi --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-long-double-128 Thread model: posix gcc version 4.4.2 (GCC) [root@jericho ~]# cat /proc/cpuinfo cpu : Alpha cpu model : EV68AL cpu variation : 7 cpu revision : 0 cpu serial number : system type : Nautilus system variation : 0 system revision : 0 system serial number : cycle frequency [Hz] : 796418537 est. timer frequency [Hz] : 1024.00 page size [bytes] : 8192 phys. address bits : 44 max. addr. space # : 255 BogoMIPS : 1586.36 kernel unaligned acc : 0 (pc=0,va=0) user unaligned acc : 0 (pc=0,va=0) platform string : UP1500 796 MHz cpus detected : 1 L1 Icache : 64K, 2-way, 64b line L1 Dcache : 64K, 2-way, 64b line L2 cache : 8192K, 1-way, 64b line L3 cache : n/a 0000-0xe5ffffff] pci 0000:01:05.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xffffffff pref] bio: create slab <bio-0> at 0 vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 852 MB/s raid6: int64x2 1084 MB/s raid6: int64x4 1100 MB/s raid6: int64x8 640 MB/s raid6: using algorithm int64x4 (1100 MB/s) Switching to clocksource jiffies NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 4194304 bytes) TCP bind hash table entries: 65536 (order: 6, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 2, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 2, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:07.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2295k freed srm_env: version 0.0.6 loaded successfully audit: initializing netlink socket (disabled) type=2000 audit(1268198602.219:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) msgmni has been set to 4043 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci-stub: invalid id string "" isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded nbd: registered device at major 43 Uniform Multi-Platform E-IDE driver alim15x3 0000:00:10.0: IDE controller (0x10b9:0x5229 rev 0xc4) alim15x3 0000:00:10.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8c80-0x8c87 ide1: BM-DMA at 0x8c88-0x8c8f ide0: not ready before the probe ide1: no devices on the port ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 (scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 0/9/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 396 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.6/5.2.0 <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded 0000:00:0b.0: DE500-BA at 0x8c00, h/w address 00:00:f0:51:19:de and requires IRQ11 (provided by PCI BIOS). de4x5.c:V0.546 2001/02/22 davies@xxxxxxxxxxxxxxxxxxx usbmon: debugfs is not available serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cm109: Keymap for Komunikate KIP1000 phone loaded atkbd.c: keyboard reset failed on isa0060/serio0 usbcore: registered new interface driver cm109 cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@xxxxxxxxxx atkbd.c: keyboard reset failed on isa0060/serio1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP bic registered TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions register_blkdev: cannot get major 3 for hd scsi: waiting for bus probes to complete ... scsi 0:0:1:0: Direct-Access ModusLnk PQ: 0 ANSI: 3 sd 0:0:1:0: Attached scsi generic sg0 type 0 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) (scsi0:0:1:0) Synchronous at 160.0 Mbyte/sec, offset 127. sd 0:0:1:0: [sda] 143638992 512-byte logical blocks: (73.5 GB/68.4 GiB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:1:0: [sda] Attached SCSI disk Freeing unused kernel memory: 216k freed Red Hat nash version 5.0.32 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading scsi_modscsi_mod: no symbol version for module_layout .ko module sd_mod: no symbol version for module_layout insmod: error inscsi_transport_spi: no symbol version for module_layout serting '/lib/scaic7xxx: no symbol version for module_layout si_mod.ko': -1 Ijbd: no symbol version for module_layout nvalid module foext3: no symbol version for module_layout rmat Loading sddm_mod: no symbol version for module_layout _mod.ko module dm_mirror: no symbol version for module_layout insmod: error indm_zero: no symbol version for module_layout serting '/lib/sddm_snapshot: no symbol version for module_layout _mod.ko': -1 Invalid module format Loading scsi_transport_spi.ko module insmod: error inserting '/lib/scsi_transport_spi.ko': -1 Invalid module format Loading aic7xxx.ko module insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting. Commit interval 5 seconds e format mounted filesystem with writeback data mode insmod: error i nserting '/lib/jbd.ko': -1 Invalid module format Loading ext3.kUnable to handle kernel paging request at virtual address 0000000000000000 o module insmodinit(1): Oops 0 : error insertinpc = [<fffffc00003cfd08>] ra = [<fffffc00003cbc84>] ps = 0000 Not tainted g '/lib/ext3.ko'v0 = 0000000000000007 t0 = 0000000000000001 t1 = fffffc007f0e91e8 : -1 Invalid modt2 = 0000000000000001 t3 = 0000000000000000 t4 = 0000000000000000 ule format Loadt5 = 0000000000000001 t6 = 0000000000000002 t7 = fffffc007f044000 ing dm-mod.ko mos0 = fffffc007f0e91c8 s1 = fffffc007f0e9180 s2 = 0000000000000001 dule insmod: ers3 = fffffc007f0e9180 s4 = fffffc007f0e9180 s5 = 000000000000000c ror inserting '/s6 = 0000000000000002 lib/dm-mod.ko': a0 = 0000000000000000 a1 = 0000000000000000 a2 = 0000000000000001 -1 Invalid modula3 = 0000000000000000 a4 = 0000000000000000 a5 = 0000000000000400 e format Loadint8 = 0000000000000001 t9 = 0000000000000001 t10= fffffc007e84c030 g dm-mirror.ko mt11= fffffc007e443c50 pv = fffffc00003cfcac at = 0000000000200200 odule insmod: egp = fffffc0000982fa0 sp = fffffc007f0477f8 rror inserting 'Disabling lock debugging due to kernel taint /lib/dm-mirror.kTrace: o': -1 Invalid m[<fffffc00003cbc84>]odule format Lo ading dm-zero.ko[<fffffc000067e6ec>] module insmod: error inserting[<fffffc000067f268>] '/lib/dm-zero.k o': -1 Invalid m[<fffffc000067f650>]odule format Lo ading dm-snapsho[<fffffc0000360000>]t.ko module ins mod: error inser[<fffffc000067f374>]ting '/lib/dm-sn apshot.ko': -1 I[<fffffc000067f474>]nvalid module fo rmat Making dev[<fffffc00004e1e04>]ice-mapper contr ol node Scannin[<fffffc00004e1fdc>]g logical volume s Reading all[<fffffc00003cfe8c>] physical volume s. This may tak[<fffffc00003d03c8>]e a while... Found volume gro[<fffffc00003d0628>]up "VolGroup00" using metadata t[<fffffc000044da80>]ype lvm2 Activa ting logical vol[<fffffc00004f6eec>]umes 2 logica l volume(s) in v[<fffffc000036b2e8>]olume group "Vol Group00" now act[<fffffc000044da80>]ive Creating ro ot device. Moun[<fffffc000044b350>]ting root filesy stem. Setting u[<fffffc000045d008>]p other filesyst ems. Setting up[<fffffc0000374958>] new root fs no fstab.sys, moun[<fffffc0000374b8c>]ting internal de faults Switchin[<fffffc000036c604>]g to new root an [<fffffc000039caf4>] unmounting old /dev unmounting[<fffffc000039cc00>] old /proc unmo [<fffffc000039c9bc>] [<fffffc000039cbd8>] [<fffffc00003a292c>] [<fffffc00003a3a64>] [<fffffc0000312be0>] [<fffffc0000310c14>] Code: 2129fff0 412103a1 f4200002 a4290000 8be10000 e5600005 <a8300000> 44211401 Kernel panic - not syncing: Attempted to kill init! -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.-- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html