Hi James (and James),
This patch does not yet appear to have been integrated.
Mike
James Smart wrote:
> Looks good Mike.
>
>
> Acked-by: James Smart <james.smart@xxxxxxxxxx>
>
> -- james s
>
> Michael Reed wrote:
>> In testing 2.6.31 on one of our ia64 platforms I've encountered a hang
>> due to the driver using hardware ATEs which are a limited resource.
>> This is because the driver does not set the dma consistent mask to
>> 64 bits.
>>
>> Here's a patch against 2.6.31 which addresses the issue.
>>
>> Signed-off-by: Michael Reed <mdr@xxxxxxx>
>>
>>
>> --- linux-2.6.31-kdb/drivers/scsi/lpfc/lpfc_init.c 2009-09-09 17:13:59.000000000 -0500
>> +++ linux-2.6.31-kdb-modified/drivers/scsi/lpfc/lpfc_init.c 2009-09-11 14:46:34.894488062 -0500
>> @@ -4355,9 +4355,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *
>> pdev = phba->pcidev;
>>
>> /* Set the device DMA mask size */
>> - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
>> - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
>> + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
>> + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
>> + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
>> + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
>> return error;
>> + }
>> + }
>>
>> /* Get the bus address of Bar0 and Bar2 and the number of bytes
>> * required by each mapping.
>> @@ -5911,9 +5915,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba
>> pdev = phba->pcidev;
>>
>> /* Set the device DMA mask size */
>> - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
>> - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
>> + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
>> + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
>> + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
>> + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
>> return error;
>> + }
>> + }
>>
>> /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
>> * number of bytes required by each mapping. They are actually
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
