In testing 2.6.31 on one of our ia64 platforms I've encountered a hang
due to the driver using hardware ATEs which are a limited resource.
This is because the driver does not set the dma consistent mask to
64 bits.
Here's a patch against 2.6.31 which addresses the issue.
Signed-off-by: Michael Reed <mdr@xxxxxxx>
--- linux-2.6.31-kdb/drivers/scsi/lpfc/lpfc_init.c 2009-09-09 17:13:59.000000000 -0500
+++ linux-2.6.31-kdb-modified/drivers/scsi/lpfc/lpfc_init.c 2009-09-11 14:46:34.894488062 -0500
@@ -4355,9 +4355,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
@@ -5911,9 +5915,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
* number of bytes required by each mapping. They are actually
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
