Hi Michael,
Here are the patches..
http://marc.info/?a=119828370000006&r=1&w=2 .
http://marc.info/?l=linux-scsi&m=125201657106722&w=2
Thanks,
Giridhar.M.B
On Sep 24, 2009, at 7:42 AM, Michael Reed wrote:
Hello,
The purpose of the queue full tracking patch in qla2xxx is to
keep the driver from changing a user space override of the queue
depth back to what the driver believes is the "correct" value.
The raid devices that we use have per raid controller queue depth
limits and have at times demonstrated, uh, bad behavior when
their queues are full for sustained periods of time. SGI needs
to be able to set queue depth for a lun based upon access patterns
and performance requirements of the entire cluster and know that
it will be honored as an upper bound.
Might you provide a pointer to the recently submitted patches?
I haven't followed linux-scsi in a while.... I'll be quite
happy to take a look.
Thanks,
Mike
Giridhar Malavali wrote:
Hi Michael/James,
Patches were submitted to move queue ramp up/down code recently to
scsi mid layer. With this change, I don't see a need for a module
parameter to disable queuefull tracking in qla2xxx driver. Andrew,
mentioned that this got introduced to avoid wobbling behavior on the
wire due to queue depth modifications. Just wanted to check whether
the same need to be done in scsi mid layer too.
Thanks,
Giridhar.M.B
--
To unsubscribe from this list: send the line "unsubscribe linux-
scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
