Hi Brian,
Foster_Brian@xxxxxxx, on 06/05/2009 10:10 PM wrote:
Hi All,
I'm glad to announce that a target driver for Marvell 88SE64xx(3G) and
88SE94xx(6G) SAS cards has been just added in the SCST SVN repository.
A
lot of thanks to Marvell and Andy Yan!
This driver allows to use a SAS controller based on Marvell 88SE64xx
or
88SE94xx chips as a SAN storage server (target). More info you can
find
on the SCST page http://scst.sourceforge.net.
You can download the driver from SCST SVN by running a command:
$ svn co https://scst.svn.sourceforge.net/svnroot/scst
Hi Vlad/Andy,
Is this target driver expected to work with 6320 cards as well? Using
this driver, I was able to discover a SATA drive connected to the 6320
in initiator mode.
I connected the 6320 directly to a second 6320 on another machine, set
up a virtual LUN with SCST (added to the default group, etc.) and
enabled target mode, but I'm not seeing anything on the initiator side.
Double check you don't have in the kernel log messages like "tgt_dev for
LUN X not found, command to unexisting LU?" (I assume you have SCST
tracing enabled, it is by default so in the SVN trunk/). If you do, then
you didn't setup the virtual LUN correctly.
Vlad
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
