Brian, This driver can work with 6320, and I will add a README for this target driver with next updates for code, I think you will find the cause you can't detect the LUN. Regards Andy Yan -----Original Message----- From: Foster_Brian@xxxxxxx [mailto:Foster_Brian@xxxxxxx] Sent: 2009年6月6日 2:10 To: vst@xxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx Cc: scst-devel@xxxxxxxxxxxxxxxxxxxxx; Andy Yan; James.Bottomley@xxxxxxxxxxxxxxxxxxxxx Subject: RE: [ANNOUNCE]: A target driver for Marvell 88SE64xx(3G) and 88SE94xx(6G) SAS cards > Hi All, > > I'm glad to announce that a target driver for Marvell 88SE64xx(3G) and > 88SE94xx(6G) SAS cards has been just added in the SCST SVN repository. A > lot of thanks to Marvell and Andy Yan! > > This driver allows to use a SAS controller based on Marvell 88SE64xx or > 88SE94xx chips as a SAN storage server (target). More info you can find > on the SCST page http://scst.sourceforge.net. > > You can download the driver from SCST SVN by running a command: > > $ svn co https://scst.svn.sourceforge.net/svnroot/scst > Hi Vlad/Andy, Is this target driver expected to work with 6320 cards as well? Using this driver, I was able to discover a SATA drive connected to the 6320 in initiator mode. I connected the 6320 directly to a second 6320 on another machine, set up a virtual LUN with SCST (added to the default group, etc.) and enabled target mode, but I'm not seeing anything on the initiator side. Brian ?韬{.n?????%??檩??w?{.n???{炳??Ф?塄}?财??j:+v??????2??璀??摺?囤??z夸z罐?+?????w棹f