On Thu, 2009-03-19 at 01:50 -0700, Andy Yan wrote: > >From e444f857a14757cf483cdbd86f91dee32e99d3ac Mon Sep 17 00:00:00 2001 > From: Andy yan <ayan@xxxxxxxxxxx> > Date: Thu, 19 Mar 2009 21:46:48 +0800 > Subject: [PATCH 1/3] Layout changes for new mvsas > This patch change Kconfig and Makefile for new layout of mvsas, > mvsas will have own folder, Kconfig, Makefile. > > Signed-off-by: Andy Yan <ayan@xxxxxxxxxxx> > Signed-off-by: Ke Wei <kewei@xxxxxxxxxxx> > Signed-off-by: Ying Chu <jasonchu@xxxxxxxxxxx> > > --- > drivers/scsi/Kconfig | 1 + > drivers/scsi/Makefile | 2 +- > drivers/scsi/mvsas/Kconfig | 42 > ++++++++++++++++++++++++++++++++++++++++++ These lines are broken by your email tool, so it makes the patch unapplyable, I'm afraid. Could you see Documentation/email-clients.txt and see if you can find a way of making the actual patches not be wrapped this way? > drivers/scsi/mvsas/Makefile | 32 ++++++++++++++++++++++++++++++++ > 4 files changed, 76 insertions(+), 1 deletions(-) > create mode 100644 drivers/scsi/mvsas/Kconfig > create mode 100644 drivers/scsi/mvsas/Makefile > > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index e2f44e6..5bb77b1 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -507,6 +507,7 @@ config SCSI_AIC7XXX_OLD > > source "drivers/scsi/aic7xxx/Kconfig.aic79xx" > source "drivers/scsi/aic94xx/Kconfig" > +source "drivers/scsi/mvsas/Kconfig" > > config SCSI_DPT_I2O > tristate "Adaptec I2O RAID support " > diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile > index cf79296..fdb2dd8 100644 > --- a/drivers/scsi/Makefile > +++ b/drivers/scsi/Makefile > @@ -124,7 +124,7 @@ obj-$(CONFIG_SCSI_IBMVSCSIS) += ibmvscsi/ > obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/ > obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o > obj-$(CONFIG_SCSI_STEX) += stex.o > -obj-$(CONFIG_SCSI_MVSAS) += mvsas.o > +obj-$(CONFIG_SCSI_MVSAS) += mvsas/ > obj-$(CONFIG_PS3_ROM) += ps3rom.o > obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgb3i/ > > diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig > new file mode 100644 > index 0000000..37096b5 > --- /dev/null > +++ b/drivers/scsi/mvsas/Kconfig > @@ -0,0 +1,42 @@ > +# > +# Kernel configuration file for 88SE64XX/88SE94XX SAS/SATA driver. > + > +# Copyright (c) 2005 Adaptec, Inc. All rights reserved. > +# Copyright (c) 2005 Luben Tuikov <luben_tuikov@xxxxxxxxxxx> Interesting copyright for a Marvell file ... > +# This file is licensed under GPLv2. > +# > +# This file is part of the 88SE64XX/88SE94XX driver. > +# > +# The 88SE64XX/88SE94XX driver is free software; you can redistribute > +# it and/or modify it under the terms of the GNU General Public License > > +# as published by the Free Software Foundation; version 2 of the > +# License. > +# > +# The 88SE64XX/88SE94XX driver is distributed in the hope that it will > be > +# useful, but WITHOUT ANY WARRANTY; without even the implied warranty > of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > +# General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with 88SE64XX/88SE94XX Driver; if not, write to the Free > Software > +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 > USA > +# > +# > + > +config SCSI_MVSAS > + tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support" > + depends on PCI > + select SCSI_SAS_LIBSAS > + select FW_LOADER > + help > + This driver supports Marvell's SAS/SATA 3Gb/s PCI-E > 88SE64XX and 6Gb/s > + PCI-E 88SE94XX chip based host adapters. > + > +config SCSI_MVSAS_DEBUG > + bool "Compile in debug mode" > + default y > + depends on SCSI_MVSAS > + help > + Compiles the 88SE64XX/88SE94XX driver in debug mode. In > debug mode, > + the driver prints some messages to the console. > diff --git a/drivers/scsi/mvsas/Makefile b/drivers/scsi/mvsas/Makefile > new file mode 100644 > index 0000000..cefc0cf > --- /dev/null > +++ b/drivers/scsi/mvsas/Makefile > @@ -0,0 +1,32 @@ > +# > +# Kernel Makefile for the libsas helpers Even more interesting description. > +# Copyright (C) 2005 Adaptec, Inc. All rights reserved. > +# Copyright (C) 2005 Luben Tuikov <luben_tuikov@xxxxxxxxxxx> > +# > +# This file is licensed under GPLv2. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; version 2 of the > +# License. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > +# General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 > +# USA > + > +ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y) > + EXTRA_CFLAGS += -DMV_DEBUG > +endif > + > +obj-$(CONFIG_SCSI_MVSAS) += mvsas.o > +mvsas-y += mv_init.o \ > + mv_sas.o \ > + mv_64xx.o \ > + mv_94xx.o You can't do the Makefile first because if I put it in in this order, and someone bisects precisely to this point, we have all the symbols but no actual C files for this Makefile to build, the result would be that the build would break. Each patch needs to be separately buildable ... I can do this by merging the three patches together (as often makes sense for new drivers), so this isn't a huge problem. James -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
