Jan Engelhardt wrote:
> On Tuesday 2009-03-03 16:21, James Bottomley wrote:
>>>> $ slabtop
>>>> OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME
>>>> 818616 818616 100% 0.16K 34109 24 136436K sgpool-8
>>>> 253692 253692 100% 0.62K 42282 6 169128K sgpool-32
>>>> 52017 52016 99% 2.50K 17339 3 138712K sgpool-128
>>>> 26220 26219 99% 0.31K 2185 12 8740K sgpool-16
>>>> 8927 8574 96% 0.03K 79 113 316K size-32
>>> Looks like a leak, by failing to call scsi_release_buffers()
>>> somehow. (Which was changed recently)
>> Firstly, I have to say I don't see this in the mainline tree, so could
>> you try that with your setup just to verify (git head at 2.6.29-rc6).
>
> Yes, looking at the rt patch (in broken-out it's in origin.diff),
> it seems a bit obvious - the scsi_release_buffers is not called anymore:
>
>
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 940dc32..d4c6ac3 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -703,71 +703,6 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
>
> static void __scsi_release_buffers(struct scsi_cmnd *, int);
>
> -/*
> - * Function: scsi_end_request()
> - *
> - * Purpose: Post-processing of completed commands (usually invoked at end
> - * of upper level post-processing and scsi_io_completion).
> - *
> - * Arguments: cmd - command that is complete.
> - * error - 0 if I/O indicates success, < 0 for I/O error.
> - * bytes - number of bytes of completed I/O
> - * requeue - indicates whether we should requeue leftovers.
> - *
> - * Lock status: Assumed that lock is not held upon entry.
> - *
> - * Returns: cmd if requeue required, NULL otherwise.
> - *
> - * Notes: This is called for block device requests in order to
> - * mark some number of sectors as complete.
> - *
> - * We are guaranteeing that the request queue will be goosed
> - * at some point during this call.
> - * Notes: If cmd was requeued, upon return it will be a stale pointer.
> - */
> -static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
> - int bytes, int requeue)
> -{
> - struct request_queue *q = cmd->device->request_queue;
> - struct request *req = cmd->request;
> -
> - /*
> - * If there are blocks left over at the end, set up the command
> - * to queue the remainder of them.
> - */
> - if (blk_end_request(req, error, bytes)) {
> - int leftover = (req->hard_nr_sectors << 9);
> -
> - if (blk_pc_request(req))
> - leftover = req->data_len;
> -
> - /* kill remainder if no retrys */
> - if (error && scsi_noretry_cmd(cmd))
> - blk_end_request(req, error, leftover);
> - else {
> - if (requeue) {
> - /*
> - * Bleah. Leftovers again. Stick the
> - * leftovers in the front of the
> - * queue, and goose the queue again.
> - */
> - scsi_release_buffers(cmd);
> - scsi_requeue_command(q, cmd);
> - cmd = NULL;
> - }
> - return cmd;
> - }
> - }
> -
> - /*
> - * This will goose the queue request function at the end, so we don't
> - * need to worry about launching another command.
> - */
> - __scsi_release_buffers(cmd, 0);
> - scsi_next_command(cmd);
> - return NULL;
> -}
> -
> static inline unsigned int scsi_sgtable_index(unsigned short nents)
> {
> unsigned int index;
> @@ -929,7 +864,6 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
> void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
> {
> int result = cmd->result;
> - int this_count;
> struct request_queue *q = cmd->device->request_queue;
> struct request *req = cmd->request;
> int error = 0;
> @@ -980,18 +914,30 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
> SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, "
> "%d bytes done.\n",
> req->nr_sectors, good_bytes));
> -
> - /* A number of bytes were successfully read. If there
> - * are leftovers and there is some kind of error
> - * (result != 0), retry the rest.
> - */
> - if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
> + if (blk_end_request(req, error, good_bytes) == 0) {
> + /* This request is completely finished; start the next one */
> + scsi_next_command(cmd);
> return;
> - this_count = blk_rq_bytes(req);
> + }
>
> error = -EIO;
>
> - if (host_byte(result) == DID_RESET) {
> + /* The request isn't finished yet. Figure out what to do next. */
> + if (result == 0) {
> + /* No error, so carry out the remainder of the request.
> + * Failure to make forward progress counts against the
> + * the number of retries.
> + */
> + if (good_bytes > 0 || --req->retries >= 0)
> + action = ACTION_REPREP;
> + else {
> + action = ACTION_FAIL;
> + description = "Retries exhausted";
> + }
> + } else if (error && scsi_noretry_cmd(cmd)) {
> + /* Retrys are disallowed, so kill the remainder. */
> + action = ACTION_FAIL;
> + } else if (host_byte(result) == DID_RESET) {
> /* Third party bus reset or reset for error recovery
> * reasons. Just retry the command and see what
> * happens.
>
>
>
> Would you happen to know where I have to reinsert them in the
> rt modification shown here?
>
You lost me. Why does rt needs to patch scsi_io_completion at all?
You should remove any rt patches that modify scsi_lib.c and revert to
vanilla 2.6.29-rc6 (scsi wise that is).
The above diff looks like something that was sent in the past to the mailing
list, but only half of it. It was sent by Alan Stern. It might patch but
it is not applicable any more because of changes made since.
>> If this holds true, there must be a bad patch in the -rt tree. You
>> should be able to diff scsi_lib.c to see if there's something missing.
>>
>> Finally, there are one or two drivers (SCSI target) that do their own
>> buffer management, so what drivers are you using?
>
>
> ata1.00: ATA-5: WDC WD400EB-00CPF0, 06.04G06, max UDMA/100
> ata1.00: 78165360 sectors, multi 16: LBA
> ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A301, max UDMA/66
> ata1.00: configured for UDMA/100
> ata1.01: configured for UDMA/66
> scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-00CP 06.0 PQ: 0 ANSI: 5
> scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A301 PQ: 0 ANSI: 5
> ata2.00: ATA-7: DIAMOND 250G 2B5400, RAMB1TU0, max UDMA/133
> ata2.00: 490234752 sectors, multi 16: LBA48
> ata2.00: configured for UDMA/133
> scsi 1:0:0:0: Direct-Access ATA DIAMOND 250G 2B RAMB PQ: 0 ANSI: 5
>
>
>
>
> Jan
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
