http://bugzilla.kernel.org/show_bug.cgi?id=12727 Summary: AIC79xx problem on Adaptec 29320A-P controller Product: SCSI Drivers Version: 2.5 KernelVersion: 2.6.25.20-0.1-default Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Other AssignedTo: scsi_drivers-other@xxxxxxxxxxxxxxxxxxxx ReportedBy: j@xxxxxxxxxxxxxx Latest working kernel version: N/A Earliest failing kernel version: 2.6.25.20-0.1-default Distribution: OpenSUSE 11.0 Hardware Environment: Supermicro server Software Environment: Problem Description: When there is a pause in writing to the tape after that the error occurs. Steps to reproduce: tar some data to tape. Hardware information and error is below: Linux version 2.6.25.20-0.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-12-12 20:30:38 +0100 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 <Adaptec 29320A Ultra320 SCSI adapter> aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs target0:0:3: asynchronous scsi 0:0:3:0: Sequential-Access IBM ULTRIUM-TD3 7AP5 PQ: 0 ANSI: 3 target0:0:3: Beginning Domain Validation target0:0:3: wide asynchronous target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target0:0:3: Ending Domain Validation scsi 0:0:3:1: Medium Changer EXABYTE MAGNUM 224 C270 PQ: 0 ANSI: 4 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ st: Version 20080221, fixed bufsize 32768, s/g segs 256 st 0:0:3:0: Attached scsi tape st0 st 0:0:3:0: st0: try direct i/o: yes (alignment 4 B) st0: Block limits 1 - 16777215 bytes. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x7f Mode 0x22 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 20614 qinfifonext = 20614 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 2 1 0 0 0 0 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x33 Mode 0x11 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 20906 qinfifonext = 20906 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80 CDB a 0 0 81 8 28 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20a Mode 0x11 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 21586 qinfifonext = 21586 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80 CDB a 0 0 81 8 28 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x33 Mode 0x11 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 39723 qinfifonext = 39723 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff80 CDB a 0 0 81 8 28 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x33 Mode 0x11 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0x25]:(P_DATAOUT_DT|ACKI|BSYI) SCSIPHASE[0x0] SCSIBUS[0x74] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 39944 qinfifonext = 39944 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80 CDB a 0 0 81 8 28 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x2e Mode 0x0 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 40103 qinfifonext = 40103 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x111c, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 0 0 0 0 0 STACK: 0x20b 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x34 Mode 0x22 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 57319 qinfifonext = 57319 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 2 1 0 0 0 0 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x30 Mode 0x0 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 57673 qinfifonext = 57673 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x111c, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 0 0 0 0 0 STACK: 0x20b 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20b Mode 0x11 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 58746 qinfifonext = 58746 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80 CDB a 0 0 81 8 28 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x7f Mode 0x22 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 61030 qinfifonext = 61030 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 2 1 0 0 0 0 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20d Mode 0x33 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 62093 qinfifonext = 62093 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff80 CDB a 0 0 81 8 28 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20a Mode 0x11 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 24670 qinfifonext = 24670 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80 CDB a 0 0 81 8 28 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x7c Mode 0x22 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 25496 qinfifonext = 25496 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 2 1 0 0 0 0 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x7c Mode 0x22 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 26162 qinfifonext = 26162 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 2 1 0 0 0 0 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. scsi0: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x34 Mode 0x22 Card was paused INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE) SCSISIGI[0xc6]:(P_STATUS|REQI|BSYI) SCSIPHASE[0x20]:(STATUS_PHASE) SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 26663 qinfifonext = 26663 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0xb]:(LAST_SEG_DONE|LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x14]:(DLZERO|LASTSDONE) SHADDR = 0x18eb4b800, SHCNT = 0x0 HADDR = 0x18eb4b800, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x108 scsi0: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 2 1 0 0 0 0 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0: Split completion read data parity error in DFF1 scsi0: Address or Write Phase Parity Error Detected in DFF1. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
