Re: [PATCH 2/2] cciss: fix regression firmware version not displayed in procfs (again and again)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 16 Oct 2008 18:17:30 -0500
Mike Miller <mike.miller@xxxxxx> wrote:

> Patch 2 of 2
> 
> The regression was introduced by commit
> 6ae5ce8e8d4de666f31286808d2285aa6a50fa40.
> This patch fixes a regression where the controller firmware version is not
> displayed in procfs. The previous patch would be called anytime something
> changed. This will get called only once for each controller.
> 
> This one addresses the un-needed initialization and the freeing of inq_buf.
> 
> Please consider this for inclusion.
> 
> Signed-off-by: Mike Miller <mike.miller@xxxxxx>
> 
> diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
> index 0f367b1..c3f0c17 100644
> --- a/drivers/block/cciss.c
> +++ b/drivers/block/cciss.c
> @@ -3404,7 +3404,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
>  	int i;
>  	int j = 0;
>  	int rc;
> -	int dac;
> +	int dac, return_code;
> +	InquiryData_struct *inq_buff;

Needs to be:

> +	InquiryData_struct *inq_buff = NULL;

The driver uses 'goto clean4' before calling kzalloc for inq_buff
(e.g. in the case of cmd_pool_bits allocation failure). It means that
you could kfree with an uninitialized address?


>  	i = alloc_cciss_hba();
>  	if (i < 0)
> @@ -3510,6 +3511,25 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
>  	/* Turn the interrupts on so we can service requests */
>  	hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
>  
> +	/* Get the firmware version */
> +	inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
> +	if (inq_buff == NULL) {
> +		printk(KERN_ERR "cciss: out of memory\n");
> +		return -ENOMEM;

Needs to use 'goto clean4' instead of just return -ENOMEM here? The
driver needs to clean up the allocated resource.


> +	}
> +
> +	return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
> +		sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD);
> +	if (return_code == IO_OK) {
> +		hba[i]->firm_ver[0] = inq_buff->data_byte[32];
> +		hba[i]->firm_ver[1] = inq_buff->data_byte[33];
> +		hba[i]->firm_ver[2] = inq_buff->data_byte[34];
> +		hba[i]->firm_ver[3] = inq_buff->data_byte[35];
> +	} else {	 /* send command failed */
> +		printk(KERN_WARNING "cciss: unable to determine firmware"
> +			" version of controller\n");
> +	}
> +
>  	cciss_procinit(i);
>  
>  	hba[i]->cciss_max_sectors = 2048;
> @@ -3520,6 +3540,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
>  	return 1;
>  
>  clean4:
> +	kfree(inq_buff);
>  #ifdef CONFIG_CISS_SCSI_TAPE
>  	kfree(hba[i]->scsi_rejects.complete);
>  #endif
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux