During internal testing, we've seen issues (hangs) with the 'deferred' vport tear-down-processing typically accompanied with the fc_remove_host() call. This is due to the current implementation's back-end vport handling being performed by the physical-HA's DPC thread where premature shutdown could lead to latent vport requests without a processor. This should also address a problem reported by Gal Rosen (http://marc.info/?l=linux-scsi&m=121731664417358&w=2) where the driver would attempt to awaken a previously torn-down DPC thread from interrupt context by implicitly calling wake_up_process() rather than the driver's qla2xxx_wake_dpc() helper. Rather, than reshuffle the remove_one() device-removal code, during unload, depend on the driver's timer to wake-up the DPC process, by limiting wake-ups based on an 'unloading' flag. Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx> --- drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_mbx.c | 2 +- drivers/scsi/qla2xxx/qla_os.c | 13 ++++++++++--- 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 8c5b25c..431c19e 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2236,6 +2236,7 @@ typedef struct scsi_qla_host { #define REGISTER_FDMI_NEEDED 26 #define FCPORT_UPDATE_NEEDED 27 #define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */ +#define UNLOADING 29 uint32_t device_flags; #define DFLG_LOCAL_DEVICES BIT_0 diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index bc90d6b..813bc77 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2686,7 +2686,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *ha, set_bit(VP_IDX_ACQUIRED, &vha->vp_flags); set_bit(VP_DPC_NEEDED, &ha->dpc_flags); - wake_up_process(ha->dpc_thread); + qla2xxx_wake_dpc(ha); } } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e0880ad..26afe44 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1775,10 +1775,15 @@ probe_out: static void qla2x00_remove_one(struct pci_dev *pdev) { - scsi_qla_host_t *ha; + scsi_qla_host_t *ha, *vha, *temp; ha = pci_get_drvdata(pdev); + list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list) + fc_vport_terminate(vha->fc_vport); + + set_bit(UNLOADING, &ha->dpc_flags); + qla2x00_dfs_remove(ha); qla84xx_put_chip(ha); @@ -2450,8 +2455,10 @@ qla2x00_do_dpc(void *data) void qla2xxx_wake_dpc(scsi_qla_host_t *ha) { - if (ha->dpc_thread) - wake_up_process(ha->dpc_thread); + struct task_struct *t = ha->dpc_thread; + + if (!test_bit(UNLOADING, &ha->dpc_flags) && t) + wake_up_process(t); } /* -- 1.6.0.rc2.22.g71b9 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
