Re: [RFC][PATCH 1/1] cxgb3i: cxgb3 iSCSI initiator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Divy Le Ray wrote:
On Thursday 31 July 2008 05:51:59 pm Divy Le Ray wrote:
On Wednesday 30 July 2008 02:35:51 pm Roland Dreier wrote:
 > * From a networking standpoint, our main concern becomes how this
 > interacts with the networking stack.  In particular, I'm concerned
 > based on reading the source that this driver uses "TCP port stealing"
 > rather than using a totally separate MAC address (and IP).
 >
 > Stealing a TCP port on an IP/interface already assigned is a common
 > solution in this space, but also a flawed one.  Precisely because the
 > kernel and applications are unaware of this "special, magic TCP port"
 > you open the potential for application problems that are very
 > difficult for an admin to diagnose based on observed behavior.

That's true, but using a separate MAC and IP opens up a bunch of other
operational problems.  I don't think the right answer for iSCSI offload
is clear yet.

 - R.
Hi Jeff,

We've considered the approach of having a separate IP/MAC addresses to
manage iSCSI connections. In such a context, the stack would have to be
unaware of this iSCSI specific IP address. The iSCSI driver would then have
to implement at least its own ARP reply mechanism. DHCP too would have to
be managed separately. Most network setting/monitoring tools would also be
unavailable.

The open-iscsi initiator is not a huge consumer of TCP connections,
allocating a TCP port from the stack would be reasonable in terms of
resources in this context. It is however unclear if it is an acceptable
approach.

Our current implementation was designed to be the most tolerable one
within the constraints - real or expected - aforementioned.


Hi Jeff,

Mike Christie will not merge this code until he has an explicit acknowledgement from netdev.

As you mentioned, the port stealing approach we've taken has its issues.
We consequently analyzed your suggestion to use a different IP/MAC address for iSCSI and it raises other tough issues (separate ARP and DHCP management, unavailability of common networking tools).

If the iscsi tools could not have to deal with networking issues that are already handled by other networking tools it would great for the iscsi users so they do not have to learn new tools. Maybe we could somehow hook into the existing network tools so they support these iscsi hbas as well as normal NICs. Would it be possible to have the iscsi hbas export the necessary network interfaces so that existing network tools can manage them?

If it comes down to it and your port stealing implementation is not acceptable like how broadcom's was not, I will be ok with doing some special iscsi network tools. Or instead of special iscsi tools, is there something that the RDMA/iWarp guys are using that we can share?
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux