On Thu, 2008-08-07 at 10:20 -0700, Greg KH wrote: > On Thu, Aug 07, 2008 at 09:03:22AM -0700, Jesse Barnes wrote: > > On Tuesday, August 5, 2008 2:54 pm James Bottomley wrote: > > > > or somesuch. That seems just as simple for driver writers as your > > > > initial patch, and the function is named in accordance with what it > > > > actually does, rather than what it's used for... > > > > > > It could, but if the bridge is the culprit (as it usually is for MSI > > > problems), this print won't help identify it. > > > > > > Therefore, rather than give driver writers a recipe for "print this and > > > this and go to the bridge and print this", I'd rather have a single PCI > > > callback that prints all the (hopefully) relevant information that will > > > allow either fixing or blacklisting. > > > > So in addition to the IRQ type check we need to dump some device topology > > information... yeah that makes sense. I wonder if the driver core should > > provide something like this. Greg? > > What kind of topology do you need that is not already provided? We really need to print how the device interrupt is routed. But, unfortunately, we need to identify the devices in the layout (bridges and the like by say device/vendor numbers) so we know what they are ... this is the bit that the generic device model can't do because it's embedded in the bus specific part. James -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
