Dear AACRAID SCSI RAID DRIVER maintainers,
I might find a bug concerning the scsi raid controller in the
**2.6.25.3** kernel.
The bug description is like this:
When I started the boot process with "AACRAID SCSI RAID DRIVER",
the kernel got into panic reporting the following message.
********************************************
... # the whole message is in the attached log file: 2.6.25.3_bug_scsi.txt
scsi2 : aacraid
scsi 2:0:0:0: Direct-Access Adaptec 2120S Mirror V1.0 PQ: 0 ANSI: 2
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
... # infinite loop
********************************************
I could not find the reason of this panic.
Respectfully,
* Keywords (i.e., modules, networking, kernel) ******
AACRAID SCSI RAID DRIVER,
kernel-2.6.25.3
* additional information ************************
My CPU: Intel(R) Xeon(TM) CPU 3.20GHz
More information is in the attached files:
-- 2.6.25.3_bug_scsi.txt
-- lspci_info.txt
-------------------------------------------------
Takuya Yoshikawa @ NTT Open Source Software Center
e-mail: yoshikawa.takuya@xxxxxxxxxxxxx
-------------------------------------------------
Linux version 2.6.25.3 (yoshikawatky@hal2) (gcc version 4.2.3 (Debian 4.2.3-3)) #2 SMP Mon May 12 19:43:32 JST 2008
Command line: root=/dev/sda2 ro console=ttyS0,38400 console=tty0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009a400 (usable)
BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data)
BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS)
BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
end_pfn_map = 2293760
DMI present.
ACPI: RSDP 000F5E30, 0014 (r0 PTLTD )
ACPI: RSDT CFF73C77, 003C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP CFF77E20, 0074 (r1 INTEL LINDHRST 6040000 PTL 3)
ACPI: DSDT CFF7406D, 3DB3 (r1 Intel LINDHRST 6040000 MSFT 100000E)
ACPI: FACS CFF78FC0, 0040
ACPI: APIC CFF77E94, 00B4 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT CFF77F48, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SPCR CFF77F70, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
ACPI: MCFG CFF77FC0, 0040 (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: SSDT CFF73CB3, 03BA (r1 PmRef CpuPm 3000 INTL 20030224)
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Bootmem setup node 0 0000000000000000-0000000230000000
NODE_DATA [0000000000012000 - 0000000000018fff]
bootmap [0000000000019000 - 000000000005efff] pages 46
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-601217] TEXT DATA BSS
early res: 3 [37ad3000-37fef542] RAMDISK
early res: 4 [9a400-9b3ff] EBDA
early res: 5 [8000-11fff] PGTABLE
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2293760
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0 -> 154
0: 256 -> 851824
0: 1048576 -> 2293760
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24])
IOAPIC[1]: apic_id 3, address 0xfec81000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48])
IOAPIC[2]: apic_id 4, address 0xfec81400, GSI 48-71
ACPI: IOAPIC (id[0x05] address[0xfec82000] gsi_base[72])
IOAPIC[3]: apic_id 5, address 0xfec82000, GSI 72-95
ACPI: IOAPIC (id[0x08] address[0xfec82400] gsi_base[96])
IOAPIC[4]: apic_id 8, address 0xfec82400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 34200 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064505
Policy zone: Normal
Kernel command line: root=/dev/sda2 ro console=ttyS0,38400 console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 3200.101 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0xf433000 - 0x13433000
Memory: 8194880k/9175040k available (2116k kernel code, 192744k reserved, 1008k data, 324k init)
Calibrating delay using timer specific routine.. 6405.17 BogoMIPS (lpj=12810357)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
ACPI: Core revision 20070126
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
Booting processor 1/4 APIC 0x6
Initializing CPU#1
Calibrating delay using timer specific routine.. 6400.35 BogoMIPS (lpj=12800716)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU 1/6 -> Node 0
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 6400.28 BogoMIPS (lpj=12800565)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/4 APIC 0x7
Initializing CPU#3
Calibrating delay using timer specific routine.. 6400.36 BogoMIPS (lpj=12800720)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU 3/7 -> Node 0
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
net_namespace: 1016 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x295-0x296 has been reserved
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1180-0x11bf has been reserved
system 00:01: ioport range 0xca2-0xca3 has been reserved
system 00:01: ioport range 0xca8-0xcaf has been reserved
system 00:01: ioport range 0x900-0x90f has been reserved
system 00:01: ioport range 0xfe00-0xfe00 has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: 2000-2fff
MEM window: 0xd8200000-0xd82fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.2
IO window: 3000-3fff
MEM window: 0xd8300000-0xd83fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: 2000-3fff
MEM window: 0xd8100000-0xd83fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: 0x00000000dc000000-0x00000000dfffffff
PCI: Bridge: 0000:05:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: 0xd8400000-0xd84fffff
PREFETCH window: 0x00000000dc000000-0x00000000dfffffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: 0xd8500000-0xd9ffffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5233k freed
Simple Boot Flag at 0x39 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1210610620.007:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /class/input/input0
Freeing unused kernel memory: 324k freed
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 32 (level, low) -> IRQ 32
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Adaptec aacraid driver 1.1-5[2455]-ms
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Floppy drive(s): fd0 is 1.44M
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
FDC 0 is a post-1991 82077
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001440
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001460
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: over-current change on port 1
hub 4-0:1.0: over-current change on port 2
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 33 (level, low) -> IRQ 33
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ACPI: PCI Interrupt 0000:04:02.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
GSI 54 (level, low) -> IRQ 54
hub 5-0:1.0: over-current change on port 7
hub 5-0:1.0: over-current change on port 8
e1000: 0000:04:02.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2c:f4:d0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:04:02.1[B] -> GSI 55 (level, low) -> IRQ 55
e1000: 0000:04:02.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2c:f4:d1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ICH5: IDE controller (0x8086:0x24db rev 0x02) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:PIO, hdb:PIO
ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:DMA, hdd:PIO
hdc: CD-224E, ATAPI CD/DVD-ROM drive
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 72 (level, low) -> IRQ 72
AAC0: kernel 4.2-0[7349] Dec 11 2004
AAC0: monitor 4.2-0[7349]
AAC0: bios 4.2-0[7349]
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi2 : aacraid
scsi 2:0:0:0: Direct-Access Adaptec 2120S Mirror V1.0 PQ: 0 ANSI: 2
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195
aac_srb: aac_fib_send failed with status: 8195yoshikawatky@hal2:~/linux/linux-2.6.25.3$ lspci
00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0a)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0a)
00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0a)
00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 0a)
00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0a)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
02:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 09)
02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
02:00.3 PIC: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B (rev 09)
03:03.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
03:03.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
04:02.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
04:02.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
05:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 09)
05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
05:00.3 PIC: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B (rev 09)
06:02.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
09:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
