On Wed, 30 Apr 2008, Tore Anderson wrote: > * Andrew Vasquez > > > We did notice that the RISC firmware being loaded is quite dated (15 > > months): > > I did ensure that we were running the latest firmware when trying to > track down the problem. From what I can tell 4.00.27 was the latest > available on your FTP up until the 23rd of April. I simply didn't check > to see if any updates were published in the last week. Ok, I see where the confusion lies... I've always updated ql2400_fw.bin to the latest FW version, and simply renamed older versions to ql2400_fw.bin.X.YY.ZZ. To avoid any future uncertainty, I've changed the layout a bit and now archive older firmware versions in an 'old' directory... > > At a minimum, our FW folks suggested 4.01.00 should be used to > > address any known residual MSI issues at the RISC-side. You can > > download the latest 24xx firmware (4.04.00) here: > > The sysadmins have requested that I leave the box alone for a few days > more so we can tell our customer that we're 100% confident we have a > viable workaround for the stability problems. I'll reboot with MSI > enabled and FW 4.04.00 on Friday, and will let you know how it's going > on Monday. > > I hope you're okay with waiting until then. That's fine. Thanks again, Andrew Vasquez -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
