Hallo Eric,
"Moore, Eric" <Eric.Moore@xxxxxxx> schrieb:
> On Tuesday, April 22, 2008 1:19 AM, Lars Täuber wrote:
>
> > So this will never work for the SATA discs in our enclosure,
> > right? Or is there a chance with asking LSI to do something
> > in their firmware?
> >
> > Seems I have no chance to get to know which slot contains the
> > failed drive without a shutdown. Bad luck.
> >
>
> If you want to upgrade your controller fw, I need the contents of all the attributes in /sys/class/scsi_host/host#. Just yesterday we got Warner Wakko upgraded, and I believe it might of solved his problems. I'm not sure what problems your experiencing, as this thread has been hard to follow.
I hoped I had the newet version of the firmware on the HBA.
monosan:~ # cat /sys/class/scsi_host/host6/version_fw
01.24.01.00
monosan:~ # cat /sys/class/scsi_host/host6/version_mpi
105
monosan:~ # cat /sys/class/scsi_host/host6/version_nvdata_default
2d02h
monosan:~ # cat /sys/class/scsi_host/host6/version_nvdata_persistent
2d02h
monosan:~ # cat /sys/class/scsi_host/host6/version_product
LSISAS1068 B1
monosan:~ # cat /sys/class/scsi_host/host6/board_name
SAS3801X
> I would like to point out there is a firmware request for sending SEP request, for instance setting LEDS. Here is a copy of the structure. We call this function to set LED when there is SMART errors (for non-raid devices). For RAID, the firmware handles it. Is this what your looking for?
I'm not firm enough with scsi to understand all your words. But the problem I have is not that something doesn't work. It works with 2.6.25.
I can get the LEDs to blink. I can choose which one should do. I simply don't know which one it should be.
The problem is, I wanted to simultate a faulty drive without being one faulty.
Therefore I choosed a (working) disk to be faulty by its mutlipath-name: dm-9
Then I found out which disk it is in sd? notation. Then I read the serial number of this disk with the smartmontools.
Now I want this LED of the bay containing the disk with this serial number to blink. But I can't find out which LED matches which serial number of the containing disk.
I know my english is not the best. Ask and I try to explain again.
Regards
Lars
--
Informationstechnologie
Berlin-Brandenburgische Akademie der Wissenschaften
Jägerstrasse 22-23 10117 Berlin
Tel.: +49 30 20370-352 http://www.bbaw.de
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
