This is an update for the patch I sent two days ago. It appears
that on some hardware the debug registers are not mapped into
the same range as the standard registers, so we need an
extra ioremap() call for them.
Please consider this for 2.6.26.
# --
I've been running supermicro hardware with the Adaptec 2005/2010/2015
zero channel raid controllers for a long while. The dpt_i2o driver
in the kernel doesn't support 64-bit mode, yet I wanted to run
a 64-bit system. The i2o_block driver wasn't 64-bit capable either.
Mark Salyzyn from Adaptec kindly provided me with a 64-bit version
of the dpt_i2o driver, unfortunately it never made its way to
the upstream kernel.
In my experience, the dpt_i2o driver is rock-stable for the
Adaptec ZCR hardware, while the i2o_block driver isn't.
Because the dpt_i2o driver is still in the kernel and actively
being used, I decided to merge the essential 64 bits parts
of the alternative driver into the current kernel dpt_i2o driver.
# --------- dpt_i2o-64bit-2.6.25.patch ----------------
This patch is an update for drivers/scsi/dpt_i2o.c.
It applies to both 2.6.24.4 and 2.6.25
It contains the following changes:
* 64 bit code based on unofficial Adaptec 64 bit driver
* removes scsi_module.c dependency, adds module_init / module_exit
this is needed because we need to pass the proper device to
scsi_add_host(), and the scsi_module.c passes NULL. With NULL,
code like arch/x64/kernel/pci-gart_64.c::need_iommu() crashes
because the dev pointer it is passed is NULL.
* adds sysfs entry for /sys/class/dpt_i2o/dptiX so that udev
can create /dev/dptiX dynamically
Obviously there are more cleanups that can be done to this code,
but we need to start somewhere. Patch has been tested heavily on
both 32 and 64 bit x86 platforms.
Signed-off-by: Miquel van Smoorenburg <miquels@xxxxxxxxxx>
diff -ruN orig/linux-2.6.25/drivers/scsi/Kconfig linux-2.6.25/drivers/scsi/Kconfig
--- orig/linux-2.6.25/drivers/scsi/Kconfig 2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.25/drivers/scsi/Kconfig 2008-04-18 23:09:44.000000000 +0200
@@ -504,10 +504,9 @@
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
-# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
+ depends on SCSI && PCI && VIRT_TO_BUS
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
diff -ruN orig/linux-2.6.25/drivers/scsi/dpt/dptsig.h linux-2.6.25/drivers/scsi/dpt/dptsig.h
--- orig/linux-2.6.25/drivers/scsi/dpt/dptsig.h 2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.25/drivers/scsi/dpt/dptsig.h 2008-04-18 23:09:44.000000000 +0200
@@ -35,6 +35,8 @@
typedef unsigned short sigWORD;
#if (defined(_MULTI_DATAMODEL) && defined(sun) && !defined(_ILP32))
typedef uint32_t sigLONG;
+#elif defined(__linux__)
+typedef u32 sigLONG;
#else
typedef unsigned long sigLONG;
#endif
diff -ruN orig/linux-2.6.25/drivers/scsi/dpt/osd_util.h linux-2.6.25/drivers/scsi/dpt/osd_util.h
--- orig/linux-2.6.25/drivers/scsi/dpt/osd_util.h 2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.25/drivers/scsi/dpt/osd_util.h 2008-04-18 23:09:44.000000000 +0200
@@ -185,7 +185,11 @@
typedef unsigned char uCHAR;
typedef unsigned short uSHORT;
typedef unsigned int uINT;
+#if defined(__linux__)
+ typedef u32 uLONG;
+#else
typedef unsigned long uLONG;
+#endif
typedef union {
uCHAR u8[4];
diff -ruN orig/linux-2.6.25/drivers/scsi/dpt_i2o.c linux-2.6.25/drivers/scsi/dpt_i2o.c
--- orig/linux-2.6.25/drivers/scsi/dpt_i2o.c 2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.25/drivers/scsi/dpt_i2o.c 2008-04-19 21:04:44.000000000 +0200
@@ -108,17 +108,27 @@
static DEFINE_MUTEX(adpt_configuration_lock);
-static struct i2o_sys_tbl *sys_tbl = NULL;
-static int sys_tbl_ind = 0;
-static int sys_tbl_len = 0;
+static struct i2o_sys_tbl *sys_tbl;
+static dma_addr_t sys_tbl_pa;
+static int sys_tbl_ind;
+static int sys_tbl_len;
static adpt_hba* hba_chain = NULL;
static int hba_count = 0;
+static struct class *adpt_sysfs_class;
+
+#ifdef CONFIG_COMPAT
+static long compat_adpt_ioctl(struct file *, unsigned int, unsigned long);
+#endif
+
static const struct file_operations adpt_fops = {
.ioctl = adpt_ioctl,
.open = adpt_open,
- .release = adpt_close
+ .release = adpt_close,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = compat_adpt_ioctl,
+#endif
};
#ifdef REBOOT_NOTIFIER
@@ -151,6 +161,21 @@
*============================================================================
*/
+static inline int dpt_dma64(adpt_hba *pHba)
+{
+ return (sizeof(dma_addr_t) > 4 && (pHba)->dma64);
+}
+
+static inline u32 dma_high(dma_addr_t addr)
+{
+ return (u32) ((u64)addr >> 32);
+}
+
+static inline u32 dma_low(dma_addr_t addr)
+{
+ return (u32)addr;
+}
+
static u8 adpt_read_blink_led(adpt_hba* host)
{
if(host->FwDebugBLEDflag_P != 0) {
@@ -178,8 +203,6 @@
struct pci_dev *pDev = NULL;
adpt_hba* pHba;
- adpt_init();
-
PINFO("Detecting Adaptec I2O RAID controllers...\n");
/* search for all Adatpec I2O RAID cards */
@@ -247,13 +270,22 @@
adpt_inquiry(pHba);
}
+ adpt_sysfs_class = class_create(THIS_MODULE, "dpt_i2o");
+ if (IS_ERR(adpt_sysfs_class))
+ adpt_sysfs_class = NULL;
+
for (pHba = hba_chain; pHba; pHba = pHba->next) {
- if( adpt_scsi_register(pHba,sht) < 0){
+ if (adpt_scsi_host_alloc(pHba, sht) < 0){
adpt_i2o_delete_hba(pHba);
continue;
}
pHba->initialized = TRUE;
pHba->state &= ~DPTI_STATE_RESET;
+ if (adpt_sysfs_class) {
+ class_device_create(adpt_sysfs_class,
+ NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit),
+ NULL, "dpti%d", pHba->unit);
+ }
}
// Register our control device node
@@ -282,7 +314,7 @@
static void adpt_inquiry(adpt_hba* pHba)
{
- u32 msg[14];
+ u32 msg[17];
u32 *mptr;
u32 *lenptr;
int direction;
@@ -290,11 +322,12 @@
u32 len;
u32 reqlen;
u8* buf;
+ dma_addr_t addr;
u8 scb[16];
s32 rcode;
memset(msg, 0, sizeof(msg));
- buf = kmalloc(80,GFP_KERNEL|ADDR32);
+ buf = pci_alloc_consistent(pHba->pDev, 80, &addr);
if(!buf){
printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
return;
@@ -305,7 +338,10 @@
direction = 0x00000000;
scsidir =0x40000000; // DATA IN (iop<--dev)
- reqlen = 14; // SINGLE SGE
+ if (dpt_dma64(pHba))
+ reqlen = 17; // SINGLE SGE, 64 bit
+ else
+ reqlen = 14; // SINGLE SGE, 32 bit
/* Stick the headers on */
msg[0] = reqlen<<16 | SGL_OFFSET_12;
msg[1] = (0xff<<24|HOST_TID<<12|ADAPTER_TID);
@@ -338,8 +374,16 @@
/* Now fill in the SGList and command */
*lenptr = len;
- *mptr++ = 0xD0000000|direction|len;
- *mptr++ = virt_to_bus(buf);
+ if (dpt_dma64(pHba)) {
+ *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */
+ *mptr++ = 1 << PAGE_SHIFT;
+ *mptr++ = 0xD0000000|direction|len;
+ *mptr++ = dma_low(addr);
+ *mptr++ = dma_high(addr);
+ } else {
+ *mptr++ = 0xD0000000|direction|len;
+ *mptr++ = addr;
+ }
// Send it on it's way
rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120);
@@ -347,7 +391,7 @@
sprintf(pHba->detail, "Adaptec I2O RAID");
printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode);
if (rcode != -ETIME && rcode != -EINTR)
- kfree(buf);
+ pci_free_consistent(pHba->pDev, 80, buf, addr);
} else {
memset(pHba->detail, 0, sizeof(pHba->detail));
memcpy(&(pHba->detail), "Vendor: Adaptec ", 16);
@@ -356,7 +400,7 @@
memcpy(&(pHba->detail[40]), " FW: ", 4);
memcpy(&(pHba->detail[44]), (u8*) &buf[32], 4);
pHba->detail[48] = '\0'; /* precautionary */
- kfree(buf);
+ pci_free_consistent(pHba->pDev, 80, buf, addr);
}
adpt_i2o_status_get(pHba);
return ;
@@ -632,6 +676,100 @@
return len;
}
+/*
+ * Turn a struct scsi_cmnd * into a unique 32 bit 'context'.
+ */
+static u32 adpt_cmd_to_context(struct scsi_cmnd *cmd)
+{
+#if BITS_PER_LONG == 32
+ return (u32)(unsigned long)cmd;
+#else
+ return (u32)cmd->serial_number;
+#endif
+}
+
+/*
+ * Go from a u32 'context' to a struct scsi_cmnd * .
+ * This could probably be made more efficient.
+ */
+static struct scsi_cmnd *
+ adpt_cmd_from_context(adpt_hba * pHba, u32 context)
+{
+#if BITS_PER_LONG == 32
+ return (struct scsi_cmnd*)(unsigned long)context;
+#else
+ struct scsi_cmnd * cmd;
+ struct scsi_device * d;
+
+ if (context == 0)
+ return NULL;
+
+ spin_unlock(pHba->host->host_lock);
+ shost_for_each_device(d, pHba->host) {
+ unsigned long flags;
+ spin_lock_irqsave(&d->list_lock, flags);
+ list_for_each_entry(cmd, &d->cmd_list, list) {
+ if (((u32)cmd->serial_number == context)) {
+ spin_unlock_irqrestore(&d->list_lock, flags);
+ scsi_device_put(d);
+ spin_lock(pHba->host->host_lock);
+ return cmd;
+ }
+ }
+ spin_unlock_irqrestore(&d->list_lock, flags);
+ }
+ spin_lock(pHba->host->host_lock);
+
+ return NULL;
+#endif
+}
+
+/*
+ * Turn a pointer to ioctl reply data into an u32 'context'
+ */
+static u32 adpt_ioctl_to_context(adpt_hba * pHba, void *reply)
+{
+#if BITS_PER_LONG == 32
+ return (u32)(unsigned long)reply;
+#else
+ ulong flags = 0;
+ u32 nr, i;
+
+ spin_lock_irqsave(pHba->host->host_lock, flags);
+ nr = sizeof(pHba->ioctl_reply_context) /
+ sizeof(pHba->ioctl_reply_context[0]);
+ for (i = 0; i < nr; i++) {
+ if (pHba->ioctl_reply_context[i] == NULL) {
+ pHba->ioctl_reply_context[i] = reply;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(pHba->host->host_lock, flags);
+ if (i >= nr) {
+ kfree (reply);
+ printk(KERN_WARNING"%s: Too many outstanding "
+ "ioctl commands\n", pHba->name);
+ return (u32)-1;
+ }
+
+ return i;
+#endif
+}
+
+/*
+ * Go from an u32 'context' to a pointer to ioctl reply data.
+ */
+static void *adpt_ioctl_from_context(adpt_hba *pHba, u32 context)
+{
+#if BITS_PER_LONG == 32
+ return (void *)(unsigned long)context;
+#else
+ void *p = pHba->ioctl_reply_context[context];
+ pHba->ioctl_reply_context[context] = NULL;
+
+ return p;
+#endif
+}
/*===========================================================================
* Error Handling routines
@@ -660,7 +798,7 @@
msg[1] = I2O_CMD_SCSI_ABORT<<24|HOST_TID<<12|dptdevice->tid;
msg[2] = 0;
msg[3]= 0;
- msg[4] = (u32)cmd;
+ msg[4] = adpt_cmd_to_context(cmd);
if (pHba->host)
spin_lock_irq(pHba->host->host_lock);
rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER);
@@ -893,6 +1031,7 @@
u32 hba_map1_area_size = 0;
void __iomem *base_addr_virt = NULL;
void __iomem *msg_addr_virt = NULL;
+ int dma64 = 0;
int raptorFlag = FALSE;
@@ -906,8 +1045,20 @@
}
pci_set_master(pDev);
- if (pci_set_dma_mask(pDev, DMA_32BIT_MASK))
- return -EINVAL;
+ /*
+ * Only try to enable DMA 64 bit mode mode if the dma_addr_t
+ * type can hold 64 bit addresses.
+ */
+ if (sizeof(dma_addr_t) == 8 &&
+ pci_set_dma_mask(pDev, DMA_64BIT_MASK) == 0) {
+ dma64 = 1;
+ } else {
+ if (pci_set_dma_mask(pDev, DMA_32BIT_MASK) != 0)
+ return -EINVAL;
+ }
+
+ /* Make sure pci_alloc_consistent returns 32 bit addresses */
+ pci_set_consistent_dma_mask(pDev, DMA_32BIT_MASK);
base_addr0_phys = pci_resource_start(pDev,0);
hba_map0_area_size = pci_resource_len(pDev,0);
@@ -929,6 +1080,19 @@
raptorFlag = TRUE;
}
+#if BITS_PER_LONG == 64
+ /* x86_64 machines need more optimal mappings */
+ if (raptorFlag == TRUE) {
+ if (hba_map0_area_size > 128)
+ hba_map0_area_size = 128;
+ if (hba_map1_area_size > 524288)
+ hba_map1_area_size = 524288;
+ } else {
+ if (hba_map0_area_size > 524288)
+ hba_map0_area_size = 524288;
+ }
+#endif
+
base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
if (!base_addr_virt) {
pci_release_regions(pDev);
@@ -991,16 +1155,22 @@
pHba->state = DPTI_STATE_RESET;
pHba->pDev = pDev;
pHba->devices = NULL;
+ pHba->dma64 = dma64;
// Initializing the spinlocks
spin_lock_init(&pHba->state_lock);
spin_lock_init(&adpt_post_wait_lock);
if(raptorFlag == 0){
- printk(KERN_INFO"Adaptec I2O RAID controller %d at %p size=%x irq=%d\n",
- hba_count-1, base_addr_virt, hba_map0_area_size, pDev->irq);
+ printk(KERN_INFO "Adaptec I2O RAID controller"
+ " %d at %p size=%x irq=%d%s\n",
+ hba_count-1, base_addr_virt,
+ hba_map0_area_size, pDev->irq,
+ dma64 ? " (64-bit DMA)" : "");
} else {
- printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d\n",hba_count-1, pDev->irq);
+ printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d%s\n",
+ hba_count-1, pDev->irq,
+ dma64 ? " (64-bit DMA)" : "");
printk(KERN_INFO" BAR0 %p - size= %x\n",base_addr_virt,hba_map0_area_size);
printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size);
}
@@ -1053,10 +1223,26 @@
if(pHba->msg_addr_virt != pHba->base_addr_virt){
iounmap(pHba->msg_addr_virt);
}
- kfree(pHba->hrt);
- kfree(pHba->lct);
- kfree(pHba->status_block);
- kfree(pHba->reply_pool);
+ if(pHba->FwDebugBuffer_P)
+ iounmap(pHba->FwDebugBuffer_P);
+ if(pHba->hrt) {
+ pci_free_consistent(pHba->pDev,
+ pHba->hrt->num_entries * pHba->hrt->entry_len << 2,
+ pHba->hrt, pHba->hrt_pa);
+ }
+ if(pHba->lct) {
+ pci_free_consistent(pHba->pDev, pHba->lct_size,
+ pHba->lct, pHba->lct_pa);
+ }
+ if(pHba->status_block) {
+ pci_free_consistent(pHba->pDev, sizeof(i2o_status_block),
+ pHba->status_block, pHba->status_block_pa);
+ }
+ if(pHba->reply_pool) {
+ pci_free_consistent(pHba->pDev,
+ pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+ pHba->reply_pool, pHba->reply_pool_pa);
+ }
for(d = pHba->devices; d ; d = next){
next = d->next;
@@ -1075,23 +1261,19 @@
pci_dev_put(pHba->pDev);
kfree(pHba);
+ if (adpt_sysfs_class)
+ class_device_destroy(adpt_sysfs_class,
+ MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+
if(hba_count <= 0){
unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);
+ if (adpt_sysfs_class) {
+ class_destroy(adpt_sysfs_class);
+ adpt_sysfs_class = NULL;
+ }
}
}
-
-static int adpt_init(void)
-{
- printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
-#ifdef REBOOT_NOTIFIER
- register_reboot_notifier(&adpt_reboot_notifier);
-#endif
-
- return 0;
-}
-
-
static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun)
{
struct adpt_device* d;
@@ -1283,6 +1465,7 @@
{
u32 msg[8];
u8* status;
+ dma_addr_t addr;
u32 m = EMPTY_QUEUE ;
ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
@@ -1305,12 +1488,13 @@
schedule_timeout_uninterruptible(1);
} while (m == EMPTY_QUEUE);
- status = kzalloc(4, GFP_KERNEL|ADDR32);
+ status = pci_alloc_consistent(pHba->pDev, 4, &addr);
if(status == NULL) {
adpt_send_nop(pHba, m);
printk(KERN_ERR"IOP reset failed - no free memory.\n");
return -ENOMEM;
}
+ memset(status,0,4);
msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
@@ -1318,8 +1502,8 @@
msg[3]=0;
msg[4]=0;
msg[5]=0;
- msg[6]=virt_to_bus(status);
- msg[7]=0;
+ msg[6]=dma_low(addr);
+ msg[7]=dma_high(addr);
memcpy_toio(pHba->msg_addr_virt+m, msg, sizeof(msg));
wmb();
@@ -1329,7 +1513,10 @@
while(*status == 0){
if(time_after(jiffies,timeout)){
printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name);
- kfree(status);
+ /* We lose 4 bytes of "status" here, but we cannot
+ free these because controller may awake and corrupt
+ those bytes at any time */
+ /* pci_free_consistent(pHba->pDev, 4, buf, addr); */
return -ETIMEDOUT;
}
rmb();
@@ -1348,6 +1535,10 @@
}
if(time_after(jiffies,timeout)){
printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name);
+ /* We lose 4 bytes of "status" here, but we
+ cannot free these because controller may
+ awake and corrupt those bytes at any time */
+ /* pci_free_consistent(pHba->pDev, 4, buf, addr); */
return -ETIMEDOUT;
}
schedule_timeout_uninterruptible(1);
@@ -1364,7 +1555,7 @@
PDEBUG("%s: Reset completed.\n", pHba->name);
}
- kfree(status);
+ pci_free_consistent(pHba->pDev, 4, status, addr);
#ifdef UARTDELAY
// This delay is to allow someone attached to the card through the debug UART to
// set up the dump levels that they want before the rest of the initialization sequence
@@ -1636,6 +1827,7 @@
u32 i = 0;
u32 rcode = 0;
void *p = NULL;
+ dma_addr_t addr;
ulong flags = 0;
memset(&msg, 0, MAX_MESSAGE_SIZE*4);
@@ -1668,7 +1860,10 @@
}
sg_offset = (msg[0]>>4)&0xf;
msg[2] = 0x40000000; // IOCTL context
- msg[3] = (u32)reply;
+ msg[3] = adpt_ioctl_to_context(pHba, reply);
+ if (msg[3] == (u32)-1)
+ return -EBUSY;
+
memset(sg_list,0, sizeof(sg_list[0])*pHba->sg_tablesize);
if(sg_offset) {
// TODO 64bit fix
@@ -1690,7 +1885,7 @@
}
sg_size = sg[i].flag_count & 0xffffff;
/* Allocate memory for the transfer */
- p = kmalloc(sg_size, GFP_KERNEL|ADDR32);
+ p = pci_alloc_consistent(pHba->pDev, sg_size, &addr);
if(!p) {
printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
pHba->name,sg_size,i,sg_count);
@@ -1708,7 +1903,7 @@
}
}
//TODO 64bit fix
- sg[i].addr_bus = (u32)virt_to_bus(p);
+ sg[i].addr_bus = addr;
}
}
@@ -1762,7 +1957,7 @@
/* Copy out the SG list to user's buffer if necessary */
if(! (sg[j].flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR*/)) {
sg_size = sg[j].flag_count & 0xffffff;
- // TODO 64bit fix
+ // TODO 64bit fix, mgmt app currently 32 bit
if (copy_to_user((void __user *)sg[j].addr_bus,sg_list[j], sg_size)) {
printk(KERN_WARNING"%s: Could not copy %p TO user %x\n",pHba->name, sg_list[j], sg[j].addr_bus);
rcode = -EFAULT;
@@ -1787,12 +1982,17 @@
cleanup:
- if (rcode != -ETIME && rcode != -EINTR)
+ if (rcode != -ETIME && rcode != -EINTR) {
+ struct sg_simple_element *sg =
+ (struct sg_simple_element*) (msg +sg_offset);
kfree (reply);
- while(sg_index) {
- if(sg_list[--sg_index]) {
- if (rcode != -ETIME && rcode != -EINTR)
- kfree(sg_list[sg_index]);
+ while(sg_index) {
+ if(sg_list[--sg_index]) {
+ pci_free_consistent(pHba->pDev,
+ sg[sg_index].flag_count & 0xffffff,
+ sg_list[sg_index],
+ sg[sg_index].addr_bus);
+ }
}
}
return rcode;
@@ -1978,6 +2178,38 @@
return error;
}
+#ifdef CONFIG_COMPAT
+static long compat_adpt_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct inode *inode;
+ long ret;
+
+ inode = file->f_dentry->d_inode;
+
+ lock_kernel();
+
+ switch(cmd) {
+ case DPT_SIGNATURE:
+ case I2OUSRCMD:
+ case DPT_CTRLINFO:
+ case DPT_SYSINFO:
+ case DPT_BLINKLED:
+ case I2ORESETCMD:
+ case I2ORESCANCMD:
+ case (DPT_TARGET_BUSY & 0xFFFF):
+ case DPT_TARGET_BUSY:
+ ret = adpt_ioctl(inode, file, cmd, arg);
+ break;
+ default:
+ ret = -ENOIOCTLCMD;
+ }
+
+ unlock_kernel();
+
+ return ret;
+}
+#endif
static irqreturn_t adpt_isr(int irq, void *dev_id)
{
@@ -2009,7 +2241,16 @@
goto out;
}
}
- reply = bus_to_virt(m);
+ if (pHba->reply_pool_pa <= m &&
+ m < pHba->reply_pool_pa +
+ (pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4)) {
+ reply = (u8 *)pHba->reply_pool +
+ (m - pHba->reply_pool_pa);
+ } else {
+ /* Ick, we should *never* be here */
+ printk(KERN_ERR "dpti: reply frame not from pool\n");
+ reply = (u8 *)bus_to_virt(m);
+ }
if (readl(reply) & MSG_FAIL) {
u32 old_m = readl(reply+28);
@@ -2029,7 +2270,7 @@
}
context = readl(reply+8);
if(context & 0x40000000){ // IOCTL
- void *p = (void *)readl(reply+12);
+ void *p = adpt_ioctl_from_context(pHba, readl(reply+12));
if( p != NULL) {
memcpy_fromio(p, reply, REPLY_FRAME_SIZE * 4);
}
@@ -2043,15 +2284,17 @@
status = I2O_POST_WAIT_OK;
}
if(!(context & 0x40000000)) {
- cmd = (struct scsi_cmnd*) readl(reply+12);
+ cmd = adpt_cmd_from_context(pHba,
+ readl(reply+12));
if(cmd != NULL) {
printk(KERN_WARNING"%s: Apparent SCSI cmd in Post Wait Context - cmd=%p context=%x\n", pHba->name, cmd, context);
}
}
adpt_i2o_post_wait_complete(context, status);
} else { // SCSI message
- cmd = (struct scsi_cmnd*) readl(reply+12);
+ cmd = adpt_cmd_from_context (pHba, readl(reply+12));
if(cmd != NULL){
+ scsi_dma_unmap(cmd);
if(cmd->serial_number != 0) { // If not timedout
adpt_i2o_to_scsi(reply, cmd);
}
@@ -2072,6 +2315,7 @@
int i;
u32 msg[MAX_MESSAGE_SIZE];
u32* mptr;
+ u32* lptr;
u32 *lenptr;
int direction;
int scsidir;
@@ -2079,6 +2323,7 @@
u32 len;
u32 reqlen;
s32 rcode;
+ dma_addr_t addr;
memset(msg, 0 , sizeof(msg));
len = scsi_bufflen(cmd);
@@ -2118,7 +2363,7 @@
// I2O_CMD_SCSI_EXEC
msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid);
msg[2] = 0;
- msg[3] = (u32)cmd; /* We want the SCSI control block back */
+ msg[3] = adpt_cmd_to_context(cmd); /* Want SCSI control block back */
// Our cards use the transaction context as the tag for queueing
// Adaptec/DPT Private stuff
msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16);
@@ -2136,7 +2381,13 @@
memcpy(mptr, cmd->cmnd, cmd->cmd_len);
mptr+=4;
lenptr=mptr++; /* Remember me - fill in when we know */
- reqlen = 14; // SINGLE SGE
+ if (dpt_dma64(pHba)) {
+ reqlen = 16; // SINGLE SGE
+ *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */
+ *mptr++ = 1 << PAGE_SHIFT;
+ } else {
+ reqlen = 14; // SINGLE SGE
+ }
/* Now fill in the SGList and command */
nseg = scsi_dma_map(cmd);
@@ -2146,12 +2397,16 @@
len = 0;
scsi_for_each_sg(cmd, sg, nseg, i) {
+ lptr = mptr;
*mptr++ = direction|0x10000000|sg_dma_len(sg);
len+=sg_dma_len(sg);
- *mptr++ = sg_dma_address(sg);
+ addr = sg_dma_address(sg);
+ *mptr++ = dma_low(addr);
+ if (dpt_dma64(pHba))
+ *mptr++ = dma_high(addr);
/* Make this an end of list */
if (i == nseg - 1)
- mptr[-2] = direction|0xD0000000|sg_dma_len(sg);
+ *lptr = direction|0xD0000000|sg_dma_len(sg);
}
reqlen = mptr - msg;
*lenptr = len;
@@ -2177,13 +2432,13 @@
}
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
{
- struct Scsi_Host *host = NULL;
+ struct Scsi_Host *host;
- host = scsi_register(sht, sizeof(adpt_hba*));
+ host = scsi_host_alloc(sht, sizeof(adpt_hba*));
if (host == NULL) {
- printk ("%s: scsi_register returned NULL\n",pHba->name);
+ printk("%s: scsi_host_alloc returned NULL\n", pHba->name);
return -1;
}
host->hostdata[0] = (unsigned long)pHba;
@@ -2200,7 +2455,7 @@
host->max_lun = 256;
host->max_channel = pHba->top_scsi_channel + 1;
host->cmd_per_lun = 1;
- host->unique_id = (uint) pHba;
+ host->unique_id = (u32)sys_tbl_pa + pHba->unit;
host->sg_tablesize = pHba->sg_tablesize;
host->can_queue = pHba->post_fifo_size;
@@ -2640,11 +2895,10 @@
static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
{
u8 *status;
+ dma_addr_t addr;
u32 __iomem *msg = NULL;
int i;
ulong timeout = jiffies + TMOUT_INITOUTBOUND*HZ;
- u32* ptr;
- u32 outbound_frame; // This had to be a 32 bit address
u32 m;
do {
@@ -2663,13 +2917,14 @@
msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
- status = kzalloc(4, GFP_KERNEL|ADDR32);
+ status = pci_alloc_consistent(pHba->pDev, 4, &addr);
if (!status) {
adpt_send_nop(pHba, m);
printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
pHba->name);
return -ENOMEM;
}
+ memset(status, 0, 4);
writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
@@ -2678,7 +2933,7 @@
writel(4096, &msg[4]); /* Host page frame size */
writel((REPLY_FRAME_SIZE)<<16|0x80, &msg[5]); /* Outbound msg frame size and Initcode */
writel(0xD0000004, &msg[6]); /* Simple SG LE, EOB */
- writel(virt_to_bus(status), &msg[7]);
+ writel((u32)addr, &msg[7]);
writel(m, pHba->post_port);
wmb();
@@ -2693,6 +2948,10 @@
rmb();
if(time_after(jiffies,timeout)){
printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name);
+ /* We lose 4 bytes of "status" here, but we
+ cannot free these because controller may
+ awake and corrupt those bytes at any time */
+ /* pci_free_consistent(pHba->pDev, 4, status, addr); */
return -ETIMEDOUT;
}
schedule_timeout_uninterruptible(1);
@@ -2701,25 +2960,30 @@
// If the command was successful, fill the fifo with our reply
// message packets
if(*status != 0x04 /*I2O_EXEC_OUTBOUND_INIT_COMPLETE*/) {
- kfree(status);
+ pci_free_consistent(pHba->pDev, 4, status, addr);
return -2;
}
- kfree(status);
+ pci_free_consistent(pHba->pDev, 4, status, addr);
- kfree(pHba->reply_pool);
+ if(pHba->reply_pool != NULL) {
+ pci_free_consistent(pHba->pDev,
+ pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+ pHba->reply_pool, pHba->reply_pool_pa);
+ }
- pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+ pHba->reply_pool = (u32*)pci_alloc_consistent(pHba->pDev,
+ pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+ &pHba->reply_pool_pa);
if (!pHba->reply_pool) {
printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
return -ENOMEM;
}
+ memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
- ptr = pHba->reply_pool;
for(i = 0; i < pHba->reply_fifo_size; i++) {
- outbound_frame = (u32)virt_to_bus(ptr);
- writel(outbound_frame, pHba->reply_port);
+ writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
+ pHba->reply_port);
wmb();
- ptr += REPLY_FRAME_SIZE;
}
adpt_i2o_status_get(pHba);
return 0;
@@ -2743,11 +3007,11 @@
u32 m;
u32 __iomem *msg;
u8 *status_block=NULL;
- ulong status_block_bus;
if(pHba->status_block == NULL) {
pHba->status_block = (i2o_status_block*)
- kmalloc(sizeof(i2o_status_block),GFP_KERNEL|ADDR32);
+ pci_alloc_consistent(pHba->pDev, sizeof(i2o_status_block),
+ &pHba->status_block_pa);
if(pHba->status_block == NULL) {
printk(KERN_ERR
"dpti%d: Get Status Block failed; Out of memory. \n",
@@ -2757,7 +3021,6 @@
}
memset(pHba->status_block, 0, sizeof(i2o_status_block));
status_block = (u8*)(pHba->status_block);
- status_block_bus = virt_to_bus(pHba->status_block);
timeout = jiffies+TMOUT_GETSTATUS*HZ;
do {
rmb();
@@ -2782,8 +3045,8 @@
writel(0, &msg[3]);
writel(0, &msg[4]);
writel(0, &msg[5]);
- writel(((u32)status_block_bus)&0xffffffff, &msg[6]);
- writel(0, &msg[7]);
+ writel( dma_low(pHba->status_block_pa), &msg[6]);
+ writel( dma_high(pHba->status_block_pa), &msg[7]);
writel(sizeof(i2o_status_block), &msg[8]); // 88 bytes
//post message
@@ -2812,7 +3075,17 @@
}
// Calculate the Scatter Gather list size
- pHba->sg_tablesize = (pHba->status_block->inbound_frame_size * 4 -40)/ sizeof(struct sg_simple_element);
+ if (dpt_dma64(pHba)) {
+ pHba->sg_tablesize
+ = ((pHba->status_block->inbound_frame_size * 4
+ - 14 * sizeof(u32))
+ / (sizeof(struct sg_simple_element) + sizeof(u32)));
+ } else {
+ pHba->sg_tablesize
+ = ((pHba->status_block->inbound_frame_size * 4
+ - 12 * sizeof(u32))
+ / sizeof(struct sg_simple_element));
+ }
if (pHba->sg_tablesize > SG_LIST_ELEMENTS) {
pHba->sg_tablesize = SG_LIST_ELEMENTS;
}
@@ -2863,7 +3136,8 @@
}
do {
if (pHba->lct == NULL) {
- pHba->lct = kmalloc(pHba->lct_size, GFP_KERNEL|ADDR32);
+ pHba->lct = pci_alloc_consistent(pHba->pDev,
+ pHba->lct_size, &pHba->lct_pa);
if(pHba->lct == NULL) {
printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n",
pHba->name);
@@ -2879,7 +3153,7 @@
msg[4] = 0xFFFFFFFF; /* All devices */
msg[5] = 0x00000000; /* Report now */
msg[6] = 0xD0000000|pHba->lct_size;
- msg[7] = virt_to_bus(pHba->lct);
+ msg[7] = (u32)pHba->lct_pa;
if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 360))) {
printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n",
@@ -2890,7 +3164,8 @@
if ((pHba->lct->table_size << 2) > pHba->lct_size) {
pHba->lct_size = pHba->lct->table_size << 2;
- kfree(pHba->lct);
+ pci_free_consistent(pHba->pDev, pHba->lct_size,
+ pHba->lct, pHba->lct_pa);
pHba->lct = NULL;
}
} while (pHba->lct == NULL);
@@ -2901,13 +3176,19 @@
// I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO;
if(adpt_i2o_query_scalar(pHba, 0 , 0x8000, -1, buf, sizeof(buf))>=0) {
pHba->FwDebugBufferSize = buf[1];
- pHba->FwDebugBuffer_P = pHba->base_addr_virt + buf[0];
- pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P + FW_DEBUG_FLAGS_OFFSET;
- pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + FW_DEBUG_BLED_OFFSET;
- pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1;
- pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + FW_DEBUG_STR_LENGTH_OFFSET;
- pHba->FwDebugBuffer_P += buf[2];
- pHba->FwDebugFlags = 0;
+ pHba->FwDebugBuffer_P = ioremap(pHba->base_addr_phys + buf[0],
+ pHba->FwDebugBufferSize);
+ if (pHba->FwDebugBuffer_P) {
+ pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P +
+ FW_DEBUG_FLAGS_OFFSET;
+ pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P +
+ FW_DEBUG_BLED_OFFSET;
+ pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1;
+ pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P +
+ FW_DEBUG_STR_LENGTH_OFFSET;
+ pHba->FwDebugBuffer_P += buf[2];
+ pHba->FwDebugFlags = 0;
+ }
}
return 0;
@@ -2915,25 +3196,29 @@
static int adpt_i2o_build_sys_table(void)
{
- adpt_hba* pHba = NULL;
+ adpt_hba* pHba = hba_chain;
int count = 0;
+ if (sys_tbl)
+ pci_free_consistent(pHba->pDev, sys_tbl_len,
+ sys_tbl, sys_tbl_pa);
+
sys_tbl_len = sizeof(struct i2o_sys_tbl) + // Header + IOPs
(hba_count) * sizeof(struct i2o_sys_tbl_entry);
- kfree(sys_tbl);
-
- sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+ sys_tbl = pci_alloc_consistent(pHba->pDev, sys_tbl_len, &sys_tbl_pa);
if (!sys_tbl) {
printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");
return -ENOMEM;
}
+ memset(sys_tbl, 0, sys_tbl_len);
sys_tbl->num_entries = hba_count;
sys_tbl->version = I2OVERSION;
sys_tbl->change_ind = sys_tbl_ind++;
for(pHba = hba_chain; pHba; pHba = pHba->next) {
+ u64 addr;
// Get updated Status Block so we have the latest information
if (adpt_i2o_status_get(pHba)) {
sys_tbl->num_entries--;
@@ -2949,8 +3234,9 @@
sys_tbl->iops[count].frame_size = pHba->status_block->inbound_frame_size;
sys_tbl->iops[count].last_changed = sys_tbl_ind - 1; // ??
sys_tbl->iops[count].iop_capabilities = pHba->status_block->iop_capabilities;
- sys_tbl->iops[count].inbound_low = (u32)virt_to_bus(pHba->post_port);
- sys_tbl->iops[count].inbound_high = (u32)((u64)virt_to_bus(pHba->post_port)>>32);
+ addr = pHba->base_addr_phys + 0x40;
+ sys_tbl->iops[count].inbound_low = dma_low(addr);
+ sys_tbl->iops[count].inbound_high = dma_high(addr);
count++;
}
@@ -3086,7 +3372,8 @@
do {
if (pHba->hrt == NULL) {
- pHba->hrt=kmalloc(size, GFP_KERNEL|ADDR32);
+ pHba->hrt = pci_alloc_consistent(pHba->pDev,
+ size, &pHba->hrt_pa);
if (pHba->hrt == NULL) {
printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name);
return -ENOMEM;
@@ -3098,7 +3385,7 @@
msg[2]= 0;
msg[3]= 0;
msg[4]= (0xD0000000 | size); /* Simple transaction */
- msg[5]= virt_to_bus(pHba->hrt); /* Dump it here */
+ msg[5]= (u32)pHba->hrt_pa; /* Dump it here */
if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg),20))) {
printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret);
@@ -3106,8 +3393,10 @@
}
if (pHba->hrt->num_entries * pHba->hrt->entry_len << 2 > size) {
- size = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
- kfree(pHba->hrt);
+ int newsize = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
+ pci_free_consistent(pHba->pDev, size,
+ pHba->hrt, pHba->hrt_pa);
+ size = newsize;
pHba->hrt = NULL;
}
} while(pHba->hrt == NULL);
@@ -3121,33 +3410,53 @@
int group, int field, void *buf, int buflen)
{
u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field };
- u8 *resblk;
+ u8 *opblk_va;
+ dma_addr_t opblk_pa;
+ u8 *resblk_va;
+ dma_addr_t resblk_pa;
int size;
/* 8 bytes for header */
- resblk = kmalloc(sizeof(u8) * (8+buflen), GFP_KERNEL|ADDR32);
- if (resblk == NULL) {
+ resblk_va = pci_alloc_consistent(pHba->pDev, sizeof(u8) * (8 + buflen),
+ &resblk_pa);
+ if (resblk_va == NULL) {
printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name);
return -ENOMEM;
}
+ opblk_va = pci_alloc_consistent(pHba->pDev, sizeof(opblk), &opblk_pa);
+ if (opblk_va == NULL) {
+ pci_free_consistent(pHba->pDev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
+ printk(KERN_CRIT "%s: query operatio failed; Out of memory.\n",
+ pHba->name);
+ return -ENOMEM;
+ }
if (field == -1) /* whole group */
opblk[4] = -1;
+ memcpy(opblk_va, opblk, sizeof(opblk));
size = adpt_i2o_issue_params(I2O_CMD_UTIL_PARAMS_GET, pHba, tid,
- opblk, sizeof(opblk), resblk, sizeof(u8)*(8+buflen));
+ opblk_va, opblk_pa, sizeof(opblk),
+ resblk_va, resblk_pa, sizeof(u8)*(8+buflen));
+ pci_free_consistent(pHba->pDev, sizeof(opblk), opblk_va, opblk_pa);
if (size == -ETIME) {
+ pci_free_consistent(pHba->pDev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name);
return -ETIME;
} else if (size == -EINTR) {
+ pci_free_consistent(pHba->pDev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name);
return -EINTR;
}
- memcpy(buf, resblk+8, buflen); /* cut off header */
+ memcpy(buf, resblk_va+8, buflen); /* cut off header */
- kfree(resblk);
+ pci_free_consistent(pHba->pDev, sizeof(u8) * (8+buflen),
+ resblk_va, resblk_pa);
if (size < 0)
return size;
@@ -3164,10 +3473,11 @@
* ResultCount, ErrorInfoSize, BlockStatus and BlockSize.
*/
static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
- void *opblk, int oplen, void *resblk, int reslen)
+ void *opblk_va, dma_addr_t opblk_pa, int oplen,
+ void *resblk_va, dma_addr_t resblk_pa, int reslen)
{
u32 msg[9];
- u32 *res = (u32 *)resblk;
+ u32 *res = (u32 *)resblk_va;
int wait_status;
msg[0] = NINE_WORD_MSG_SIZE | SGL_OFFSET_5;
@@ -3176,12 +3486,12 @@
msg[3] = 0;
msg[4] = 0;
msg[5] = 0x54000000 | oplen; /* OperationBlock */
- msg[6] = virt_to_bus(opblk);
+ msg[6] = (u32)opblk_pa;
msg[7] = 0xD0000000 | reslen; /* ResultBlock */
- msg[8] = virt_to_bus(resblk);
+ msg[8] = (u32)resblk_pa;
if ((wait_status = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 20))) {
- printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk);
+ printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk_va);
return wait_status; /* -DetailedStatus */
}
@@ -3284,7 +3594,7 @@
* Private i/o space declaration
*/
msg[6] = 0x54000000 | sys_tbl_len;
- msg[7] = virt_to_phys(sys_tbl);
+ msg[7] = (u32)sys_tbl_pa;
msg[8] = 0x54000000 | 0;
msg[9] = 0;
msg[10] = 0xD4000000 | 0;
@@ -3323,11 +3633,10 @@
#endif
static struct scsi_host_template driver_template = {
+ .module = THIS_MODULE,
.name = "dpt_i2o",
.proc_name = "dpt_i2o",
.proc_info = adpt_proc_info,
- .detect = adpt_detect,
- .release = adpt_release,
.info = adpt_info,
.queuecommand = adpt_queue,
.eh_abort_handler = adpt_abort,
@@ -3341,5 +3650,51 @@
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
};
-#include "scsi_module.c"
+
+static int __init adpt_init(void)
+{
+ int error;
+ adpt_hba *pHba, *next;
+
+ printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
+#ifdef REBOOT_NOTIFIER
+ register_reboot_notifier(&adpt_reboot_notifier);
+#endif
+
+ error = adpt_detect(&driver_template);
+ if (error < 0)
+ return error;
+ if (hba_chain == NULL)
+ return -ENODEV;
+
+ for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ error = scsi_add_host(pHba->host, &pHba->pDev->dev);
+ if (error)
+ goto fail;
+ scsi_scan_host(pHba->host);
+ }
+ return 0;
+fail:
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
+ scsi_remove_host(pHba->host);
+ }
+ return error;
+}
+
+static void __exit adpt_exit(void)
+{
+ adpt_hba *pHba, *next;
+
+ for (pHba = hba_chain; pHba; pHba = pHba->next)
+ scsi_remove_host(pHba->host);
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
+ adpt_release(pHba->host);
+ }
+}
+
+module_init(adpt_init);
+module_exit(adpt_exit);
+
MODULE_LICENSE("GPL");
diff -ruN orig/linux-2.6.25/drivers/scsi/dpti.h linux-2.6.25/drivers/scsi/dpti.h
--- orig/linux-2.6.25/drivers/scsi/dpti.h 2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.25/drivers/scsi/dpti.h 2008-04-18 23:09:44.000000000 +0200
@@ -229,14 +229,19 @@
u32 post_fifo_size;
u32 reply_fifo_size;
u32* reply_pool;
+ dma_addr_t reply_pool_pa;
u32 sg_tablesize; // Scatter/Gather List Size.
u8 top_scsi_channel;
u8 top_scsi_id;
u8 top_scsi_lun;
+ u8 dma64;
i2o_status_block* status_block;
+ dma_addr_t status_block_pa;
i2o_hrt* hrt;
+ dma_addr_t hrt_pa;
i2o_lct* lct;
+ dma_addr_t lct_pa;
uint lct_size;
struct i2o_device* devices;
struct adpt_channel channel[MAX_CHANNEL];
@@ -249,6 +254,7 @@
void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED
void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED
u32 FwDebugFlags;
+ u32 *ioctl_reply_context[4];
} adpt_hba;
struct sg_simple_element {
@@ -275,7 +281,8 @@
static const char *adpt_i2o_get_class_name(int class);
#endif
static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
- void *opblk, int oplen, void *resblk, int reslen);
+ void *opblk, dma_addr_t opblk_pa, int oplen,
+ void *resblk, dma_addr_t resblk_pa, int reslen);
static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout);
static int adpt_i2o_lct_get(adpt_hba* pHba);
static int adpt_i2o_parse_lct(adpt_hba* pHba);
@@ -289,7 +296,7 @@
static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht);
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht);
static s32 adpt_hba_reset(adpt_hba* pHba);
static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
static s32 adpt_rescan(adpt_hba* pHba);
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
