Hello,
I have a strange problem with my SCSI subsystem. After a few days (7-10
days) of normal work the linux kernel starts to report these messages:
Mar 20 08:19:53 xxxx kernel: scsi0: PCI error Interrupt
Mar 20 08:19:53 xxxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Mar 20 08:19:53 xxxx kernel: scsi0: Dumping Card State at program
address 0x1c8 Mode 0x11
Mar 20 08:19:53 xxxx kernel: Card was paused
Mar 20 08:19:53 xxxx kernel: INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x30]
Mar 20 08:19:53 xxxx kernel: HS_MAILBOX[0x0]
INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
Mar 20 08:19:53 xxxx kernel: SEQINTSTAT[0x10]:(SEQ_SWTMRTO)
SAVED_MODE[0x11]
Mar 20 08:19:53 xxxx kernel: DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x26]:(P_DATAOUT_DT|REQI|BSYI)
Mar 20 08:19:53 xxxx kernel: SCSIPHASE[0x1]:(DATA_OUT_PHASE)
SCSIBUS[0x0] LASTPHASE[0x20]:(P_DATAOUT_DT)
Mar 20 08:19:53 xxxx kernel: SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
Mar 20 08:19:53 xxxx kernel: SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE)
Mar 20 08:19:53 xxxx kernel: SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x4]
KERNEL_QFREEZE_COUNT[0x4]
Mar 20 08:19:53 xxxx kernel: MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
Mar 20 08:19:53 xxxx kernel: SSTAT0[0x0] SSTAT1[0x9]:(REQINIT|BUSFREE)
SSTAT2[0x0]
Mar 20 08:19:53 xxxx kernel: SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
Mar 20 08:19:53 xxxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Mar 20 08:19:53 xxxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Mar 20 08:19:53 xxxx kernel:
Mar 20 08:19:53 xxxx kernel: SCB Count = 40 CMDS_PENDING = 1 LASTSCB
0xffff CURRSCB 0x1e NEXTSCB 0x0
Mar 20 08:19:53 xxxx kernel: qinstart = 20712 qinfifonext = 20712
Mar 20 08:19:53 xxxx kernel: QINFIFO:
Mar 20 08:19:53 xxxx kernel: WAITING_TID_QUEUES:
Mar 20 08:19:53 xxxx kernel: Pending list:
Mar 20 08:19:53 xxxx kernel: 30 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:53 xxxx kernel: Total 1
Mar 20 08:19:53 xxxx kernel: Kernel Free SCB list: 5 32 14 2 10 19 16 39
3 25 8 33 23 26 29 28 27 11 1 6 12 9 21 13 15 31 17 34 18 4 35 7 0 20 38
24 22 37 36
Mar 20 08:19:53 xxxx kernel: Sequencer Complete DMA-inprog list:
Mar 20 08:19:53 xxxx kernel: Sequencer Complete list:
Mar 20 08:19:53 xxxx kernel: Sequencer DMA-Up and Complete list:
Mar 20 08:19:53 xxxx kernel: Sequencer On QFreeze and Complete list:
Mar 20 08:19:53 xxxx kernel:
Mar 20 08:19:53 xxxx kernel:
Mar 20 08:19:53 xxxx kernel: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
Mar 20 08:19:53 xxxx kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Mar 20 08:19:53 xxxx kernel: SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Mar 20 08:19:53 xxxx kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0]
Mar 20 08:19:53 xxxx kernel: SOFFCNT[0x7f]
MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Mar 20 08:19:53 xxxx kernel: HADDR = 0x00, HCNT = 0x0
CCSGCTL[0x88]:(CCSGENACK|CCSGDONE)
Mar 20 08:19:53 xxxx kernel:
Mar 20 08:19:53 xxxx kernel: scsi0: FIFO1 Active, LONGJMP == 0x1f1, SCB 0x1e
Mar 20 08:19:53 xxxx kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Mar 20 08:19:53 xxxx kernel: SEQINTSRC[0x0]
DFCNTRL[0x2c]:(DIRECTION|HDMAEN|SCSIEN)
Mar 20 08:19:53 xxxx kernel:
DFSTATUS[0xc9]:(FIFOEMP|HDONE|PKT_PRELOAD_AVAIL|PRELOAD_AVAIL)
Mar 20 08:19:53 xxxx kernel: SG_CACHE_SHADOW[0xe0]
SG_STATE[0x6]:(LOADING_NEEDED|FETCH_INPROG)
Mar 20 08:19:53 xxxx kernel: DFFSXFRCTL[0x0] SOFFCNT[0x7f]
MDFFSTAT[0x4]:(DLZERO)
Mar 20 08:19:53 xxxx kernel: SHADDR = 0x024bc000, SHCNT = 0x0 HADDR =
0x024bc000, HCNT = 0x0
Mar 20 08:19:53 xxxx kernel:
CCSGCTL[0x9c]:(CCSGENACK|SG_CACHE_AVAIL|CCSGDONE|CCSGEN)
Mar 20 08:19:53 xxxx kernel: LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Mar 20 08:19:53 xxxx kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Mar 20 08:19:53 xxxx kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Mar 20 08:19:53 xxxx kernel: scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Mar 20 08:19:53 xxxx kernel:
Mar 20 08:19:53 xxxx kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Mar 20 08:19:53 xxxx kernel: CCSCBCTL[0x4]:(CCSCBDIR)
Mar 20 08:19:53 xxxx kernel: scsi0: REG0 == 0x3, SINDEX = 0x1e0, DINDEX
= 0xa9
Mar 20 08:19:53 xxxx kernel: scsi0: SCBPTR == 0x1e, SCB_NEXT == 0xffc0,
SCB_NEXT2 == 0xfff4
Mar 20 08:19:53 xxxx kernel: CDB 0 c 0 0 e0 28
Mar 20 08:19:53 xxxx kernel: STACK: 0x20a 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Mar 20 08:19:53 xxxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Mar 20 08:19:53 xxxx kernel: scsi0: Data Parity Error has been reported
via PERR# in DFF1
Mar 20 08:19:53 xxxx kernel: scsi0: Split completion read data parity
error in DFF1
Mar 20 08:19:53 xxxx kernel: scsi0: Signal System Error Detected in DFF1
Mar 20 08:19:53 xxxx kernel: scsi0: Address or Write Phase Parity Error
Detected in DFF1.
Mar 20 08:19:59 xxxx kernel: scsi0: PCI error Interrupt
Mar 20 08:19:59 xxxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Mar 20 08:19:59 xxxx kernel: scsi0: Dumping Card State at program
address 0x32 Mode 0x33
Mar 20 08:19:59 xxxx kernel: Card was paused
Mar 20 08:19:59 xxxx kernel: INTSTAT[0x10]:(PCIINT) SELOID[0x3] SELID[0x30]
Mar 20 08:19:59 xxxx kernel: HS_MAILBOX[0x0]
INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
Mar 20 08:19:59 xxxx kernel: SEQINTSTAT[0x10]:(SEQ_SWTMRTO)
SAVED_MODE[0x11]
Mar 20 08:19:59 xxxx kernel: DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0xe6]:(P_MESGIN|REQI|BSYI)
Mar 20 08:19:59 xxxx kernel: SCSIPHASE[0x8]:(MSG_IN_PHASE) SCSIBUS[0x2]
LASTPHASE[0x20]:(P_DATAOUT_DT)
Mar 20 08:19:59 xxxx kernel: SCSISEQ0[0x40]:(ENSELO)
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
Mar 20 08:19:59 xxxx kernel: SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE)
Mar 20 08:19:59 xxxx kernel: SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x4]
KERNEL_QFREEZE_COUNT[0x4]
Mar 20 08:19:59 xxxx kernel: MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
Mar 20 08:19:59 xxxx kernel: SSTAT0[0x2]:(SPIORDY)
SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS)
Mar 20 08:19:59 xxxx kernel: SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
Mar 20 08:19:59 xxxx kernel:
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
Mar 20 08:19:59 xxxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Mar 20 08:19:59 xxxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Mar 20 08:19:59 xxxx kernel:
Mar 20 08:19:59 xxxx kernel: SCB Count = 40 CMDS_PENDING = 17 LASTSCB
0xffff CURRSCB 0x11 NEXTSCB 0x0
Mar 20 08:19:59 xxxx kernel: qinstart = 21076 qinfifonext = 21076
Mar 20 08:19:59 xxxx kernel: QINFIFO:
Mar 20 08:19:59 xxxx kernel: WAITING_TID_QUEUES:
Mar 20 08:19:59 xxxx kernel: 3 ( 0x11 0x1e )
Mar 20 08:19:59 xxxx kernel: Pending list:
Mar 20 08:19:59 xxxx kernel: 30 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 17 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 25 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 3 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 31 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 26 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 29 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 13 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 32 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 34 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 22 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 6 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 20 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 35 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 10 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 28 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: 33 FIFO_USE[0x0]
SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB)
Mar 20 08:19:59 xxxx kernel: SCB_SCSIID[0x3f]:(OID)
Mar 20 08:19:59 xxxx kernel: Total 17
Mar 20 08:19:59 xxxx kernel: Kernel Free SCB list: 19 21 12 9 5 8 11 27
1 39 16 24 14 38 2 4 0 18 7 15 23 37 36
Mar 20 08:19:59 xxxx kernel: Sequencer Complete DMA-inprog list:
Mar 20 08:19:59 xxxx kernel: Sequencer Complete list:
Mar 20 08:19:59 xxxx kernel: Sequencer DMA-Up and Complete list:
Mar 20 08:19:59 xxxx kernel: Sequencer On QFreeze and Complete list:
Mar 20 08:19:59 xxxx kernel:
Mar 20 08:19:59 xxxx kernel:
Mar 20 08:19:59 xxxx kernel: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
Mar 20 08:19:59 xxxx kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Mar 20 08:19:59 xxxx kernel: SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Mar 20 08:19:59 xxxx kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0]
Mar 20 08:19:59 xxxx kernel: SOFFCNT[0x0]
MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Mar 20 08:19:59 xxxx kernel: HADDR = 0x00, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Mar 20 08:19:59 xxxx kernel:
Mar 20 08:19:59 xxxx kernel: scsi0: FIFO1 Active, LONGJMP == 0x81f1, SCB
0x22
Mar 20 08:19:59 xxxx kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Mar 20 08:19:59 xxxx kernel: SEQINTSRC[0x0] DFCNTRL[0xc]:(DIRECTION|HDMAEN)
Mar 20 08:19:59 xxxx kernel:
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x1b]:(LAST_SEG_DONE|LAST_SEG)
Mar 20 08:19:59 xxxx kernel: SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0]
MDFFSTAT[0x14]:(DLZERO|LASTSDONE)
Mar 20 08:19:59 xxxx kernel: SHADDR = 0x04870a000, SHCNT = 0x0 HADDR =
0x04870a000, HCNT = 0x0
Mar 20 08:19:59 xxxx kernel: CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Mar 20 08:19:59 xxxx kernel: LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Mar 20 08:19:59 xxxx kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Mar 20 08:19:59 xxxx kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
Mar 20 08:19:59 xxxx kernel: scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Mar 20 08:19:59 xxxx kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Mar 20 08:19:59 xxxx kernel: CCSCBCTL[0x0]
Mar 20 08:19:59 xxxx kernel: scsi0: REG0 == 0xffff, SINDEX = 0x11a,
DINDEX = 0xa9
Mar 20 08:19:59 xxxx kernel: scsi0: SCBPTR == 0x22, SCB_NEXT == 0x20,
SCB_NEXT2 == 0x20
Mar 20 08:19:59 xxxx kernel: CDB 2a 0 14 80 18 68
Mar 20 08:19:59 xxxx kernel: STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Mar 20 08:19:59 xxxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Mar 20 08:19:59 xxxx kernel: scsi0: Data Parity Error has been reported
via PERR# in DFF1
Mar 20 08:19:59 xxxx kernel: scsi0: Split completion read data parity
error in DFF1
Mar 20 08:19:59 xxxx kernel: scsi0: Signal System Error Detected in DFF1
Mar 20 08:19:59 xxxx kernel: scsi0: Address or Write Phase Parity Error
Detected in DFF1.
After a few of those messages the file system gets corrupted and the
partition is mounted read-only.
I already tried changing the scsi cables, terminators, running without
terminators, changing the SCSI controler card (unfortunately i only had
exactly same model) but nothing helps and i'm running out of ideas. I
have two identical machines: same motherboard, same scsi controler
connected to almost the same (difference is only in the number of hard
disk bays) external RAID units and it happens on both of them. On one it
happens regularly on the other it only happened twice in one year.
The same SCSI setup (same external raid and scsi controlers) was used
before on different motherboard and it worked ok, so i'm assuming that
the problem isn't between the scsi controler and the external RAID.
I'm currently running debian 2.6.22-3-amd64 kernel. I also tried stock
debian 2.6.18-5-amd64 kernel with the same results.
I also tried disabling the ACPI and the results were the same.
Any ideas/help would be very helpful.
Regards,
Primoz
HW data:
Motherboard: SuperMicro X7DBR-E
Processor: Intel Xeon 5150
SCSI controler: Adaptec ASC-29320A
External RAID: InforTrend A08U-G1410
Some additional data:
Linux: Debian 4.0
Arch: x86_64
lspci
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller
Hub (rev b1)
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8
Port 2-3 (rev b1)
00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8
Port 4-5 (rev b1)
00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8
Port 6-7 (rev b1)
00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA
Engine (rev b1)
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset Error
Reporting Registers (rev b1)
00:10.1 Host bridge: Intel Corporation 5000 Series Chipset Error
Reporting Registers (rev b1)
00:10.2 Host bridge: Intel Corporation 5000 Series Chipset Error
Reporting Registers (rev b1)
00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved
Registers (rev b1)
00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved
Registers (rev b1)
00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers
(rev b1)
00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers
(rev b1)
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
Express Root Port 1 (rev 09)
00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #1 (rev 09)
00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #2 (rev 09)
00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #3 (rev 09)
00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #4 (rev 09)
00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset
EHCI USB2 Controller (rev 09)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9)
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC
Interface Controller (rev 09)
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller
(rev 09)
00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus
Controller (rev 09)
01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express
Upstream Port (rev 01)
01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to
PCI-X Bridge (rev 01)
02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E1 (rev 01)
02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E3 (rev 01)
04:00.0 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN
Controller Copper (rev 01)
04:00.1 Ethernet controller: Intel Corporation 631xESB/632xESB DPT LAN
Controller Copper (rev 01)
05:01.0 SCSI storage controller: Adaptec ASC-29320A U320 (rev 10)
08:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A (rev 09)
0a:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
/proc/interrupts
CPU0 CPU1
0: 76027268 76025263 IO-APIC-edge timer
1: 1011 1052 IO-APIC-edge i8042
4: 37108 37134 IO-APIC-edge serial
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 2 1 IO-APIC-edge i8042
14: 19 18 IO-APIC-edge ide0
16: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
24: 4391317 4392842 IO-APIC-fasteoi aic79xx
1272: 245051 247594 PCI-MSI-edge eth1
1273: 21405357 21403145 PCI-MSI-edge eth0
NMI: 0 0
LOC: 152058048 152058024
ERR: 0
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
