I found that sending REPORT_LUNS command to some DVD device will
cause fis error and controller error record. As a result, scsi mid layer
get some wrong LUNs. Also I can get some queer messages.
scsi: host 12 channel 0 id 2 lun 0x30302e302f686f73 has a LUN larger
than currently supported.
scsi: host 12 channel 0 id 2 lun 0x7431322f706f7274 has a LUN larger
than currently supported.
scsi: host 12 channel 0 id 2 lun 0x2d31323a322f656e has a LUN larger
than currently supported.
...
The patch forced to clear the sg buffer of SATA response if FIS is
error. But I suggest these codes should remove to the libsas module.
Signed-off-by: Ke Wei <kewei@xxxxxxxxxxx>
---
drivers/scsi/mvsas.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index e55b903..42f3e90 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -1263,8 +1263,14 @@ static int mvs_sata_done(struct mvs_info *mvi,
struct sas_task *task,
SATA_RECEIVED_D2H_FIS(port->taskfileset),
sizeof(struct dev_to_host_fis));
tstat->buf_valid_size = sizeof(*resp);
- if (unlikely(err))
+ if (unlikely(err)) {
+ struct scatterlist *sg = task->scatter;
+ u8 *buf;
stat = SAS_PROTO_RESPONSE;
+ buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset;
+ memset(buf, 0, sg->length);
+ kunmap_atomic(buf - sg->offset, KM_IRQ0);
+ }
return stat;
}
--
1.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
