2008/2/26, nickcheng <nick.cheng@xxxxxxxxxxxx>:> Hi Aron,> Thanks for your patience.> If you still got into trouble, please let me know.> Thank you again, I have now tried: * Turning on/off NCQ in the Areca RAID.* Turning on/off read-ahead cache in the Areca RAID.* Putting the disks in anti-vibration mounts in 5.25" slots.* Switching SATA cables.* Using legacy ATA power connectors instead of the SATA ones. But I still have the problem. The power supply is 650W so there shouldbe plenty of power. There's only two Raptor disks, an Opteron CPU andan nVidia 6600GT in the machine. The Raptor two Raptor disks have different firmware on them, couldthat cause any problem? Two people who had read my post here on LKML have contacted me one-mail and have the same problem, but they have Seagate and Samsungdisks, and use the 1220 controller. The problem is hard to trigger, I've not been able to trigger it withany benchmarking tool, but in ~95% of the cases I can trigger it byjust copying a directory with lots of small files (around 500 MB). Anyone else seeing this? I'd really like to get it to work since thisis my only computer :( Should I try with XFS or ReiserFS instead of EXT3? Regards,Aron >> -----Original Message-----> From: Aron Stansvik [mailto:elvstone@xxxxxxxxx]>> Sent: Tuesday, February 26, 2008 6:52 AM> To: erich> Cc: nick.cheng@xxxxxxxxxxxx; akpm@xxxxxxxxxxxxxxxxxxxx;> linux-scsi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx> Subject: Re: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1>> Hi Erich.>> 2008/2/25, nickcheng <nick.cheng@xxxxxxxxxxxx>:> > Hi Aron,> > From our field experiences and customers' feedbacks, all of them direct> to> > vibration and power issues.> > The vibration could be caused by FANs not only by themselves.>> Okay. I have a chassi fan that is quite close to the drives, I will> try disabling it. I've also ordered two Nexus TwinDisk anti vibration> harddrive mounts with which I'll place the disks in my 5.25" slots> instead, away from any fans.>> If this doesn't work, I'm stumped, as I really don't think it's the> power supply and I don't have the money to buy a new one.>> > You mentioned it could be the F/W issue.> > If the environment does not meet the prerequisite, FW could not work> > correctly.> > Actually FW just reacts to the situations not it causes the issue.>> Of course, I understand this. Just trying to figure this problem out..>> > Please check it out!!>> I'll report back with my findings with moving disk away from fans and> using anti-vibrations mounts.>> Thanks for taking your time to reply.>> Aron>> > Thank you,> >> >> > -----Original Message-----> > From: Aron Stansvik [mailto:elvstone@xxxxxxxxx]> > Sent: Sunday, February 24, 2008 1:54 AM> > To: nick.cheng@xxxxxxxxxxxx> > Cc: erich; akpm@xxxxxxxxxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx;> > linux-kernel@xxxxxxxxxxxxxxx> >> > Subject: Re: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1> >> > Hello again Areca and LKML hackers.> >> > 2008/2/18, Aron Stansvik <elvstone@xxxxxxxxx>:> > > Hello Nick.> > >> > > Sorry that I'm not answering until now. I've been busy.> > >> > > 2008/2/13, nickcheng <nick.cheng@xxxxxxxxxxxx>:> > >> > > > Hi Aron,> > > > From our experience and some customers' feedback, your issue could> be> > caused> > > > by power instability or vibration to your HDs.> > > > Please check step by step:> > > > (1).under your original environment, increase the SCSI command> value,> > > > default=30, with the shell script, set_scsicmd_timeout(). 90 or 120> is> > > > enough.> > > > (2).if method 1 does not work, find out the vibration source or> change> > the> > > > power supply> > >> > >> > > I will try to increase that value. I don't think it's vibration; the> > > disks are firmly in place in a very heavy chassi (Silverstone> > > SST-TJ05B-T). And I really don't think there's something wrong with> > > the power supply, it's a pretty new Silverstone ST65ZF 650W. This is> > > my own personal workstation, so I don't just have another power supply> > > to test with :/> > >> > > I will report back on my success/failure. Thanks for your answer.> >> > I've now tried with both 90 and 120 for the timeout value, and the> > problem still persists. It seems to happen when lots of small writes> > are occuring, e.g. when installing something.> >> > I really don't think the disks are vibrating, I don't see how they> > could. One more thing I'm going to test is to use the legacy ATA power> > connector instead of the SATA power connector. This was what I was> > using before when I only had a single drive and no RAID controller.> > Maybe my power supply is malfunctioning and not giving enough power on> > the SATA power connectors.. but I doubt it.> >> > Is there anything else that could cause this? Have you guys at Areca> > tested the ARC-1200 with Raptors in RAID1?> >> > :(> >> > Regards,> > Aron> >> > >> > >> > > Aron> > >> > >> > > > If your still have any questions, please feel free to let me know.> > > >> > > > P.S. The attached driver source, arcmsr-1.20.00.15-71224, has been> > > > upstreamed to kernel.org and will be released in kernel 2.6.25. If> you> > like,> > > > you could update your driver with it.> > > > It fixes some minor bugs, but these bugs are nothing to do with> your> > issue.> > > >> > > >> > > > -----Original Message-----> > > > From: erich [mailto:erich@xxxxxxxxxxxx]> > > > Sent: Wednesday, February 13, 2008 4:33 PM> > > > To: (廣安科技)鄭守謙> > > > Subject: Fw: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1> > > >> > > >> > > >> > > > ----- Original Message -----> > > > From: "Andrew Morton" <akpm@xxxxxxxxxxxxxxxxxxxx>> > > > To: "Aron Stansvik" <elvstone@xxxxxxxxx>> > > > Cc: <linux-kernel@xxxxxxxxxxxxxxx>; <linux-scsi@xxxxxxxxxxxxxxx>;> > "erich"> > > > <erich@xxxxxxxxxxxx>> > > > Sent: Wednesday, February 13, 2008 4:03 PM> > > > Subject: Re: Aborted commands with arcmsr and 2xWD1500ADFD in RAID1> > > >> > > >> > > > >> > > > > (cc's added)> > > > >> > > > > On Mon, 11 Feb 2008 17:44:08 +0100 "Aron Stansvik"> > <elvstone@xxxxxxxxx>> > > > > wrote:> > > > >> > > > >> Hello LKML.> > > > >>> > > > >> Under semi-high disk I/O (e.g. installing a compiled KDE), I get> > the> > > > >> following (accompanied by seconds of lock-ups on the machine):> > > > >>> > > > >> [ 7727.345183] arcmsr0: abort device command of scsi id = 0 lun> = 0> > > > >> [ 7730.348776] arcmsr0: scsi id = 0 lun = 0 ccb> => > > > >> '0xdfb461c0' poll command abort successfully> > > > >> [ 8053.795943] arcmsr0: abort device command of scsi id = 0 lun> = 0> > > > >> [ 8056.799528] arcmsr0: scsi id = 0 lun = 0 ccb> => > > > >> '0xdfb595e0' poll command abort successfully> > > > >> [ 8884.592810] arcmsr0: abort device command of scsi id = 0 lun> = 0> > > > >> [ 8887.596392] arcmsr0: scsi id = 0 lun = 0 ccb> => > > > >> '0xdfb56d80' poll command abort successfully> > > > >> [ 8917.760216] arcmsr0: abort device command of scsi id = 0 lun> = 0> > > > >> [ 8920.763797] arcmsr0: scsi id = 0 lun = 0 ccb> => > > > >> '0xdfb472c0' poll command abort successfully> > > > >> [ 9074.106547] arcmsr0: abort device command of scsi id = 0 lun> = 0> > > > >>> > > > >> This is my setup:> > > > >>> > > > >> 1 x MSI K8N Master2-FAR> > > > >> 1 x Opteron 252> > > > >> 1 x Areca ARC1200 (sitting in a PCIe x4 socket)> > > > >> 2 x WD1500ADFD in RAID1> > > > >>> > > > >> astan@rubik:~$ uname -a> > > > >> Linux rubik 2.6.24-7-generic #1 SMP Thu Feb 7 01:29:58 UTC 2008> > i686> > > > >> GNU/Linux> > > > >> astan@rubik:~$ modinfo arcmsr> > > > >> filename:> > > > >> /lib/modules/2.6.24-7-generic/kernel/drivers/scsi/arcmsr/arcmsr.> ko> > > > >> version: Driver Version 1.20.00.15 2007/08/30> > > > >> license: Dual BSD/GPL> > > > >> description: ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID> HOST> > Adapter> > > > >> author: Erich Chen <support@xxxxxxxxxxxx>> > > > >> srcversion: 28EAD6AB49D4491CA04D465> > > > >> [...]> > > > >>> > > > >> I've read some previous posts here on LKML that it could be the> > Areca> > > > >> firmware who doesn't like my WD disks. Anyone know if this is an> > IRQ> > > > >> handling problem in the kernel, or if it's a problem with the> RAID> > > > >> controller firmware?> > > > >>> > > > >> Erich Chen (of Areca); have you tried the new ARC1200 in RAID1> > > > >> configuration with Raptor disks on Linux?> > > > >>> > > > >> As a side note, I can tell you that I first tried running> FreeBSD> > 6.3> > > > >> (RELENG_6) on this machine, but got random reboots during disk> I/O> > > > >> (even with a kernel with KDB debugging turned on). This leads me> to> > > > >> believe that it might be a firmware issue, and that Linux just> > handles> > > > >> it more gracefully than FreeBSD.> > > > >>> > > > >> Any ideas or advice is appriciated. This is my first post to the> > LKML,> > > > >> so please instruct me if you want more information or if you> want> > me> > > > >> to take further debugging actions.> > > > >>> > > > >> Best regards,> > > > >> Aron Stansvik> > > > >> > > >> > > >> > >> >> >>>?頨{.n?????%??橆??w?{.n???{殺??孜?雰}?笙??j:+v?? 茶 庫全?2??霅??腄冠嗓??z蹂z嫡?+???▏?w噮f
