From: Mike Christie <michaelc@xxxxxxxxxxx>
lpfc is sending a target reset from the device reset handler,
so this patch just has it use the target reset handler.
This patch also has the driver use CTX_TGT instead of CTX_LUN
in the target reset handler. It looked like a bug.
One thing I was not sure of was if lpfc_scsi_tgt_reset fails, but
the caller ends up calling lpfc_sli_abort_iocb and that aborts all
the commands for the context that is requested and those are all
cleaned up by the driver/firmware, should we return SUCCESS.
This patch should wait for James Smart. I think he is on vacation,
but the driver will work without the patch like it did before, so
it is not required that this patch be merged with the rest.
Signed-off-by: Mike Christie <michaelc@xxxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_scsi.c | 85 ++++++++++++++---------------------------
1 files changed, 29 insertions(+), 56 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 70255c1..e881ffb 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -835,13 +835,15 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
static int
lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
unsigned tgt_id, unsigned int lun,
- struct lpfc_rport_data *rdata)
+ struct lpfc_rport_data *rdata, int *iocb_status)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *iocbq;
struct lpfc_iocbq *iocbqrsp;
int ret;
+ *iocb_status = 0;
+
if (!rdata->pnode)
return FAILED;
@@ -861,13 +863,14 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
- ret = lpfc_sli_issue_iocb_wait(phba,
+ *iocb_status = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
- if (ret != IOCB_SUCCESS) {
- if (ret == IOCB_TIMEDOUT)
+ if (*iocb_status != IOCB_SUCCESS) {
+ if (*iocb_status == IOCB_TIMEDOUT)
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
+ ret = FAILED;
} else {
ret = SUCCESS;
lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
@@ -1125,16 +1128,14 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
}
static int
-lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
+lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *lpfc_cmd;
- struct lpfc_iocbq *iocbq, *iocbqrsp;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *pnode = rdata->pnode;
- uint32_t cmd_result = 0, cmd_status = 0;
int ret = FAILED;
int iocb_status = IOCB_SUCCESS;
int cnt, loopcnt;
@@ -1156,7 +1157,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
if (!rdata ||
(loopcnt > ((vport->cfg_devloss_tmo * 2) + 1))){
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0721 LUN Reset rport "
+ "0721 Target Reset rport "
"failure: cnt x%x rdata x%p\n",
loopcnt, rdata);
goto out;
@@ -1174,52 +1175,20 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
goto out;
lpfc_cmd->timeout = 60;
- lpfc_cmd->rdata = rdata;
-
- ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, cmnd->device->lun,
- FCP_TARGET_RESET);
- if (!ret)
- goto out_free_scsi_buf;
-
- iocbq = &lpfc_cmd->cur_iocbq;
-
- /* get a buffer for this IOCB command response */
- iocbqrsp = lpfc_sli_get_iocbq(phba);
- if (iocbqrsp == NULL)
- goto out_free_scsi_buf;
-
- lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
- "0703 Issue target reset to TGT %d LUN %d "
- "rpi x%x nlp_flag x%x\n", cmnd->device->id,
- cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
- iocb_status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- iocbq, iocbqrsp, lpfc_cmd->timeout);
-
- if (iocb_status == IOCB_TIMEDOUT)
- iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
-
- if (iocb_status == IOCB_SUCCESS)
- ret = SUCCESS;
- else
- ret = iocb_status;
-
- cmd_result = iocbqrsp->iocb.un.ulpWord[4];
- cmd_status = iocbqrsp->iocb.ulpStatus;
-
- lpfc_sli_release_iocbq(phba, iocbqrsp);
+ ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, cmnd->device->id,
+ cmnd->device->lun, rdata, &iocb_status);
/*
* All outstanding txcmplq I/Os should have been aborted by the device.
* Unfortunately, some targets do not abide by this forcing the driver
* to double check.
*/
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
- LPFC_CTX_LUN);
+ LPFC_CTX_TGT);
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
cmnd->device->id, cmnd->device->lun,
- LPFC_CTX_LUN);
+ LPFC_CTX_TGT);
loopcnt = 0;
while(cnt) {
schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
@@ -1229,25 +1198,29 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
break;
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
- cmnd->device->lun, LPFC_CTX_LUN);
+ cmnd->device->lun, LPFC_CTX_TGT);
}
+ /*
+ * if lpfc_scsi_tgt_reset returned FAILED but lpfc_sli_abort_iocb
+ * got run above and that aborted all the commands and cnt=0, should
+ * we return SUCCESS because at least the commands were unstuck?
+ */
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0719 device reset I/O flush failure: "
+ "0719 target reset I/O flush failure: "
"cnt x%x\n", cnt);
ret = FAILED;
}
-out_free_scsi_buf:
if (iocb_status != IOCB_TIMEDOUT) {
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0713 SCSI layer issued device reset (%d, %d) "
+ "0713 SCSI layer issued target reset (%d) "
"return x%x status x%x result x%x\n",
- cmnd->device->id, cmnd->device->lun, ret,
- cmd_status, cmd_result);
+ cmnd->device->id, ret,
+ lpfc_cmd->status, lpfc_cmd->result);
out:
return ret;
}
@@ -1263,6 +1236,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
int ret = FAILED, i, err_count = 0;
int cnt, loopcnt;
struct lpfc_scsi_buf * lpfc_cmd;
+ int iocb_status = IOCB_SUCCESS;
lpfc_block_error_handler(cmnd);
@@ -1296,9 +1270,8 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
if (!match)
continue;
- ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
- cmnd->device->lun,
- ndlp->rport->dd_data);
+ ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i, cmnd->device->lun,
+ ndlp->rport->dd_data, &iocb_status);
if (ret != SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0700 Bus Reset on target %d failed\n",
@@ -1308,7 +1281,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
}
}
- if (ret != IOCB_TIMEDOUT)
+ if (iocb_status != IOCB_TIMEDOUT)
lpfc_release_scsi_buf(phba, lpfc_cmd);
if (err_count == 0)
@@ -1453,7 +1426,7 @@ struct scsi_host_template lpfc_template = {
.info = lpfc_info,
.queuecommand = lpfc_queuecommand,
.eh_abort_handler = lpfc_abort_handler,
- .eh_device_reset_handler= lpfc_device_reset_handler,
+ .eh_target_reset_handler= lpfc_target_reset_handler,
.eh_bus_reset_handler = lpfc_bus_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
@@ -1473,7 +1446,7 @@ struct scsi_host_template lpfc_vport_template = {
.info = lpfc_info,
.queuecommand = lpfc_queuecommand,
.eh_abort_handler = lpfc_abort_handler,
- .eh_device_reset_handler= lpfc_device_reset_handler,
+ .eh_target_reset_handler= lpfc_target_reset_handler,
.eh_bus_reset_handler = lpfc_bus_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
--
1.5.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
