On Sun, 2008-02-17 at 18:46 +0200, Boaz Harrosh wrote:
> On Thu, Feb 14 2008 at 20:47 +0200, Boaz Harrosh <bharrosh@xxxxxxxxxxx> wrote:
> > Submitted are a new set of patches, that fix lots of problems
> > with the gdth driver.
> >
> > It fixes the following problems:
> > - scan for drives on hosts. (Already in mainline)
> > - truly fixes the exit/reboot problems but does call flush() before
> > reboot.
> > - fix crash when accessing array with icpcon management application.
> > - fix crash when doing $ cat /proc/sys/gdth/0.
> > This one still has the below WARN_ON in messages (see <gdth_info> below)
> > So there is one more thing hiding in there.
> > - use pci_get_device
> > One of the testers requested if we can also put the move to pci_get_device
> > patch with removal of dependency on PCI_LEGACY, to the stable release.
> >
> > The patches are for and based on Linux-2.6.24. here is the list of patches:
> > [PATCH 1/5] gdth: update deprecated pci_find_device
> > [PATCH 2/5] gdth: scan for scsi devices
> > [PATCH 3/5] gdth: bugfix for the at-exit problems
> > [PATCH 4/5] gdth: fix to internal commands execution
> > [PATCH 5/5] gdth: remove gdth cooked up command accessors
> >
> > Please all test and report your findings.
> >
> > Thanks in advance
> > Boaz
> >
> > ---
> > <gdth_info>
> > WARNING: at arch/x86/kernel/pci-dma_32.c:66 dma_free_coherent()
> > Pid: 5501, comm: cat Not tainted 2.6.24 #43
> > [<c0107137>] dma_free_coherent+0x93/0x95
> > [<c025ef73>] gdth_ioctl_free+0x4c/0x69
> > [<c0264a36>] gdth_proc_info+0x165f/0x182c
> > [<c0111f7a>] update_curr+0xeb/0xf2
> > [<c01132aa>] task_rq_lock+0x29/0x50
> > [<c0113706>] try_to_wake_up+0x42/0x342
> > [<c0113706>] try_to_wake_up+0x42/0x342
> > [<c0111a9f>] __wake_up_common+0x46/0x6d
> > [<c0113569>] __wake_up+0x32/0x42
> > [<c022dad9>] n_tty_receive_buf+0x2e8/0xe97
> > [<c022dad9>] n_tty_receive_buf+0x2e8/0xe97
> > [<c0111f0a>] update_curr+0x7b/0xf2
> > [<c0112625>] enqueue_task_fair+0x27/0x30
> > [<c0111783>] enqueue_task+0xa/0x14
> > [<c025e351>] proc_scsi_read+0x29/0x3d
> > [<c025e328>] proc_scsi_read+0x0/0x3d
> > [<c0189704>] proc_file_read+0x1c6/0x279
> > [<c018953e>] proc_file_read+0x0/0x279
> > [<c0185eca>] proc_reg_read+0x53/0x71
> > [<c0185e77>] proc_reg_read+0x0/0x71
> > [<c0159968>] vfs_read+0x85/0x11b
> > [<c0159d9d>] sys_read+0x41/0x6a
> > [<c0102822>] sysenter_past_esp+0x5f/0x85
> > </gdth_info>
> > -
> James hi.
>
> All my testers have reported back that with these 5 patches applied they can
> now run with a 2.6.24 kernel the same way they ran before. However there is
> that reported issue, with the dma_free_coherent WARN_ON (above). The code was
> like that from day one and it is a very old issue, however it is a regression
> because 2.6.24 introduced that new WARN_ON.
> (infamous commit aa24886e379d2b641c5117e178b15ce1d5d366ba)
> >From posts on lkml and even recent one in linux-scsi about the arcmsr driver
> it looks that all a driver can do is work around it with different kernel mechanisms
> and driver rewrites. I'm afraid I need your help here. I'm not sure I understand
> why does the gdth driver uses the pci_{alloc,free}_consistent() API's, and what
> is needed to replace it. Could you please have a look in gdth_proc.c and also in
> gdth.c for all the places that call gdth_ioctl_alloc/gdth_ioctl_free, and advise
> what can I do in it's place. Please bear in mind that we need it for 2.6.24, as
> a bugfix.
>
> Apart from the above issue, please accept patches 3,4,5 above they have now
> been tested and are reported to bring broken system back to production.
> (Given that you approve off course). And mark them for inclusion to the
> 2.6.24 stable releases. (Or is there some thing that I should do)
>
> ---
> Meanwhile on x86 systems I understand the WARN_ON is cosmetic, and does not
> pose any harm. Some people have reported stability with temporarily disabling
> it. For testers that want to try, here it is below. At your own risk.
Isn't this the correct fix? pscratch is a permanent address (it's
allocated at boot time and never changes). All you need the smp lock
for is mediating the scratch in use flag.
James
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index de57734..ce0228e 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -694,15 +694,13 @@ static void gdth_ioctl_free(gdth_ha_str *ha, int size, char *buf, ulong64 paddr)
{
ulong flags;
- spin_lock_irqsave(&ha->smp_lock, flags);
-
if (buf == ha->pscratch) {
+ spin_lock_irqsave(&ha->smp_lock, flags);
ha->scratch_busy = FALSE;
+ spin_unlock_irqrestore(&ha->smp_lock, flags);
} else {
pci_free_consistent(ha->pdev, size, buf, paddr);
}
-
- spin_unlock_irqrestore(&ha->smp_lock, flags);
}
#ifdef GDTH_IOCTL_PROC
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
