--- On Sat, 2/2/08, James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> wrote:
> From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
> Subject: Re: [PATCH] [SCSI] sd: make error handling more robust (v2)
> To: "Tony Battersby" <tonyb@xxxxxxxxxxxxxxx>
> Cc: "linux-scsi@xxxxxxxxxxxxxxx" <linux-scsi@xxxxxxxxxxxxxxx>, "Luben Tuikov" <ltuikov@xxxxxxxxx>, "Salyzyn, Mark" <Mark_Salyzyn@xxxxxxxxxxx>
> Date: Saturday, February 2, 2008, 2:06 PM
> On Fri, 2008-02-01 at 12:03 -0500, Tony Battersby wrote:
> > This patch fixes a problem with some out-of-spec SCSI
> disks that report
> > hardware or medium errors incorrectly. Without the
> patch, the kernel
> > may silently ignore a failed write command or return
> corrupted data on a
> > failed read command.
> >
> > Signed-off-by: Tony Battersby
> <tonyb@xxxxxxxxxxxxxxx>
> > ---
> >
> > This is a simplified version of the original patch
> that fixes just the
> > problem at hand, without trying to handle other
> theoretical out-of-spec
> > cases.
>
> Actually, to restore the original check, this is what we
> want, isn't it?
> Ok, so I also made the sector division logic futureproof
> for the day we
> have > 4096 sector devices ...
>
> James
>
> ---
>
> >From 5ae2e4a8ff095aab5997f17068d3e4212c33f039 Mon Sep
> 17 00:00:00 2001
> From: Tony Battersby <tonyb@xxxxxxxxxxxxxxx>
> Date: Fri, 1 Feb 2008 12:03:27 -0500
> Subject: [SCSI] sd: make error handling more robust
>
> This patch fixes a problem with some out-of-spec SCSI disks
> that report
> hardware or medium errors incorrectly. Without the patch,
> the kernel
> may silently ignore a failed write command or return
> corrupted data on a
> failed read command.
>
> Signed-off-by: Tony Battersby <tonyb@xxxxxxxxxxxxxxx>
> Cc: Stable Tree <stable@xxxxxxxxxx>
> Signed-off-by: James Bottomley
> <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/scsi/sd.c | 5 +++++
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
> Index: BUILD-2.6/drivers/scsi/sd.c
> ===================================================================
> --- BUILD-2.6.orig/drivers/scsi/sd.c 2008-02-02
> 15:43:20.000000000 -0600
> +++ BUILD-2.6/drivers/scsi/sd.c 2008-02-02
> 16:01:24.000000000 -0600
> @@ -929,6 +929,7 @@
> unsigned int xfer_size = scsi_bufflen(SCpnt);
> unsigned int good_bytes = result ? 0 : xfer_size;
> u64 start_lba = SCpnt->request->sector;
> + u64 end_lba = SCpnt->request->sector + (xfer_size /
> 512);
> u64 bad_lba;
> struct scsi_sense_hdr sshdr;
> int sense_valid = 0;
> @@ -967,26 +968,23 @@
> goto out;
> if (xfer_size <= SCpnt->device->sector_size)
> goto out;
> - switch (SCpnt->device->sector_size) {
> - case 256:
> + if (SCpnt->device->sector_size < 512) {
> + /* only legitimate sector_size here is 256 */
> start_lba <<= 1;
> - break;
> - case 512:
> - break;
> - case 1024:
> - start_lba >>= 1;
> - break;
> - case 2048:
> - start_lba >>= 2;
> - break;
> - case 4096:
> - start_lba >>= 3;
> - break;
> - default:
> - /* Print something here with limiting frequency. */
> - goto out;
> - break;
> + end_lba <<= 1;
> + } else {
> + /* be careful ... don't want any overflows */
> + u64 factor = SCpnt->device->sector_size / 512;
> + do_div(start_lba, factor);
> + do_div(end_lba, factor);
> }
> +
> + if (bad_lba < start_lba || bad_lba >= end_lba)
> + /* the bad lba was reported incorrectly, we have
> + * no idea where the error is
> + */
> + goto out;
> +
> /* This computation should always be done in terms of
> * the resolution of the device's medium.
> */
Looks good except that "End LBA" is usually defined
to be something of the sort of "the LBA of the last
logical block accessed by the command" or "the LBA
of the logical block on which the command failed".
A spec savvy editor of this code would be
"pleasantly" surprised if they had to use "end_lba",
and didn't pay attention that it was actually
"End LBA" + 1.
Luben
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
