[PATCH 1/1] aacraid: don't assign cpu_to_le32(int) to u8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Good point, thanks. The intent of the management applications
utilization of this AIF report is to observe the LSB of the value of
integer value in BlinkLED. The actions of the cpu_to_le32 actually
breaks this and reports the wrong content in swapped architectures.

This attached follow-up patch is against current scsi-misc-2.6 *after*
the application of the 'don't assign cpu_to_le32(constant) to u8' patch
submitted by Stephen Rothwell which has already been taken by the -mm
tree. Inspection of other areas of the aacraid driver came up blank for
similar style bugs.

ObligatoryDisclaimer: Please accept my condolences regarding Outlook's
handling of patch attachments (inline gets damaged, use attachment).

Signed-off-by: Mark Salyzyn <aacraid@xxxxxxxxxxx>

 drivers/scsi/aacraid/commsup.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -ru a/drivers/scsi/aacraid/commsup.c
b/drivers/scsi/aacraid/commsup.c
--- a/drivers/scsi/aacraid/commsup.c    2007-11-07 10:35:16.603727464
-0500
+++ b/drivers/scsi/aacraid/commsup.c    2007-11-07 10:37:50.540311107
-0500
@@ -1342,7 +1342,7 @@
                        aif->data[0] = AifEnExpEvent;
                        aif->data[1] = AifExeFirmwarePanic;
                        aif->data[2] = AifHighPriority;
-                       aif->data[3] = cpu_to_le32(BlinkLED);
+                       aif->data[3] = BlinkLED;

                        /*
                         * Put the FIB onto the

Sincerely -- Mark Salyzyn

> -----Original Message-----
> From: Andreas Schwab [mailto:schwab@xxxxxxx] 
> Sent: Thursday, November 01, 2007 9:31 AM
> To: Stephen Rothwell
> Cc: AACRAID; linux-scsi@xxxxxxxxxxxxxxx; LKML
> Subject: Re: [PATCHv2] aacraid: don't assign 
> cpu_to_le32(constant) to u8
> 
> Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> writes:
> 
> > diff --git a/drivers/scsi/aacraid/commsup.c 
> b/drivers/scsi/aacraid/commsup.c
> > index 240a0bb..3c2dbc0 100644
> > --- a/drivers/scsi/aacraid/commsup.c
> > +++ b/drivers/scsi/aacraid/commsup.c
> > @@ -1339,9 +1339,9 @@ int aac_check_health(struct aac_dev * aac)
> >  			aif = (struct aac_aifcmd *)hw_fib->data;
> >  			aif->command = cpu_to_le32(AifCmdEventNotify);
> >  		 	aif->seqnum = cpu_to_le32(0xFFFFFFFF);
> > -		 	aif->data[0] = cpu_to_le32(AifEnExpEvent);
> > -			aif->data[1] = cpu_to_le32(AifExeFirmwarePanic);
> > -		 	aif->data[2] = cpu_to_le32(AifHighPriority);
> > +			aif->data[0] = AifEnExpEvent;
> > +			aif->data[1] = AifExeFirmwarePanic;
> > +			aif->data[2] = AifHighPriority;
> >  			aif->data[3] = cpu_to_le32(BlinkLED);
> 
> What about the last line?
> 
> Andreas.

Attachment: aacraid_BlinkLED.patch
Description: aacraid_BlinkLED.patch


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux