Re: qla1280 driver for qlogic-1040 on alpha

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 30 Oct 2024 08:52:44 +0100
Magnus Lindholm <linmag7@xxxxxxxxx> wrote:

> I've found a few datasheets from qlogic, on ISP1040x, ISP1080 and
> ISP10160. The ISP1040 doesn't mention any 64-bit capabilities in the
> chip.

the datasheet is wrong. QL1040 supports 64bit addresses via DAC,
otherwise it wouldn't work on SGI Origin and SGI Octane systems.
Your patch breaks them (verified on a Octane).

So your problem might not be in the scsi driver, but a PCI setup
problem for the bus of the 32bit PCI slot in your system. If this
bus doesn't support DAC it IMHO shoulnd't allow 64bit PCI addresses.

Thomas.

-- 
SUSE Software Solutions Germany GmbH
HRB 36809 (AG Nürnberg)
Geschäftsführer: Ivo Totev, Andrew McDonald, Werner Knoblich





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux