This series contains some fixes including:
- Adjust priority of registering and exiting debugfs for security;
- Create trigger_dump at the end of the debugfs initialization;
- Add firmware information check;
- Enable all PHYs that are not disabled by user during controller reset;
- Reset PHY again if phyup timeout;
- Check usage count only when the runtime PM status is RPM_SUSPENDING;
- Add cond_resched() for no forced preemption model;
- Default enable interrupt coalescing;
- Update disk locked timeout to 7 seconds;
- Add time interval between two H2D FIS following soft reset spec;
- Update v3 hw STP_LINK_TIMER setting;
- Create all dump files during debugfs initialization;
- Add latest_dump for the debugfs dump;
Xingui Yang (3):
scsi: hisi_sas: Update disk locked timeout to 7 seconds
scsi: hisi_sas: Add time interval between two H2D FIS following soft
reset spec
scsi: hisi_sas: Update v3 hw STP_LINK_TIMER setting
Yihang Li (10):
scsi: hisi_sas: Adjust priority of registering and exiting debugfs for
security
scsi: hisi_sas: Create trigger_dump at the end of the debugfs
initialization
scsi: hisi_sas: Add firmware information check
scsi: hisi_sas: Enable all PHYs that are not disabled by user during
controller reset
scsi: hisi_sas: Reset PHY again if phyup timeout
scsi: hisi_sas: Check usage count only when the runtime PM status is
RPM_SUSPENDING
scsi: hisi_sas: Add cond_resched() for no forced preemption model
scsi: hisi_sas: Default enable interrupt coalescing
scsi: hisi_sas: Create all dump files during debugfs initialization
scsi: hisi_sas: Add latest_dump for the debugfs dump
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 33 ++++-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 18 +++
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 18 +++
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 187 ++++++++++++++++++-------
5 files changed, 206 insertions(+), 51 deletions(-)
--
2.33.0
