Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/2/24 15:06, Christoph Hellwig wrote:
Switch to the ->device_configure method instead of ->slave_configure
and update the block limits on the passed in queue_limits instead
of using the per-limit accessors.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Reviewed-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
---
  drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 ++++++++----------
  1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index ef8ee93005eae6..89ef43a5ef862d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2497,14 +2497,15 @@ _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
  }
/**
- * scsih_slave_configure - device configure routine.
+ * scsih_device_configure - device configure routine.
   * @sdev: scsi device struct
+ * @lim: queue limits
   *
   * Return: 0 if ok. Any other return is assumed to be an error and
   * the device is ignored.
   */
  static int
-scsih_slave_configure(struct scsi_device *sdev)
+scsih_device_configure(struct scsi_device *sdev, struct queue_limits *lim)
  {
  	struct Scsi_Host *shost = sdev->host;
  	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -2609,8 +2610,7 @@ scsih_slave_configure(struct scsi_device *sdev)
  			    raid_device->num_pds, ds);
if (shost->max_sectors > MPT3SAS_RAID_MAX_SECTORS) {
-			blk_queue_max_hw_sectors(sdev->request_queue,
-						MPT3SAS_RAID_MAX_SECTORS);
+			lim->max_hw_sectors = MPT3SAS_RAID_MAX_SECTORS;
  			sdev_printk(KERN_INFO, sdev,
  					"Set queue's max_sector to: %u\n",
  						MPT3SAS_RAID_MAX_SECTORS);
@@ -2675,8 +2675,7 @@ scsih_slave_configure(struct scsi_device *sdev)
  				pcie_device->connector_name);
if (pcie_device->nvme_mdts)
-			blk_queue_max_hw_sectors(sdev->request_queue,
-					pcie_device->nvme_mdts/512);
+			lim->max_hw_sectors = pcie_device->nvme_mdts / 512;
pcie_device_put(pcie_device);
  		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
@@ -2687,8 +2686,7 @@ scsih_slave_configure(struct scsi_device *sdev)
  		 **/
  		blk_queue_flag_set(QUEUE_FLAG_NOMERGES,
  				sdev->request_queue);
-		blk_queue_virt_boundary(sdev->request_queue,
-				ioc->page_size - 1);
+		lim->virt_boundary_mask = ioc->page_size - 1;
  		return 0;
  	}
Here the same argument as done for the previous patch could be made; if we had the possibility to set NOMERGES in the queue limits we could do away with the reference to the request queue here.

Cheers,

Hannes
--
Dr. Hannes Reinecke                  Kernel Storage Architect
hare@xxxxxxx                                +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux