[PATCH V1 1/2] scsi: ufs: qcom : Refactor phy_power_on/off calls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit 3f6d1767b1a0 ("phy: ufs-qcom: Refactor all init steps into
phy_poweron") removes the phy_power_on/off from ufs_qcom_setup_clocks
to suspend/resume func.

To have a better power saving, remove the phy_power_on/off calls from
resume/suspend path and put them back to ufs_qcom_setup_clocks, so that
PHY's regulators & clks can be turned on/off along with UFS's clocks.

Since phy phy_power_on is separated out from phy calibrate, make
separate calls to phy_power_on and phy_calibrate calls from ufs qcom
driver.

Also add a mutex lock to protect the usage of is_phy_pwr_on against
possible racing.

Co-developed-by: Can Guo <quic_cang@xxxxxxxxxxx>
Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
 drivers/ufs/host/ufs-qcom.c | 104 +++++++++++++++++++++++-------------
 drivers/ufs/host/ufs-qcom.h |   4 ++
 2 files changed, 72 insertions(+), 36 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 39eef470f8fa..2721a30f0db8 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -338,6 +338,46 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba)
 	return UFS_HS_G3;
 }

+static int ufs_qcom_phy_power_on(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct phy *phy = host->generic_phy;
+	int ret = 0;
+
+	mutex_lock(&host->phy_mutex);
+	if (!host->is_phy_pwr_on) {
+		ret = phy_power_on(phy);
+		if (ret) {
+			mutex_unlock(&host->phy_mutex);
+			return ret;
+		}
+		host->is_phy_pwr_on = true;
+	}
+	mutex_unlock(&host->phy_mutex);
+
+	return ret;
+}
+
+static int ufs_qcom_phy_power_off(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	struct phy *phy = host->generic_phy;
+	int ret = 0;
+
+	mutex_lock(&host->phy_mutex);
+	if (host->is_phy_pwr_on) {
+		ret = phy_power_off(phy);
+		if (ret) {
+			mutex_unlock(&host->phy_mutex);
+			return ret;
+		}
+		host->is_phy_pwr_on = false;
+	}
+	mutex_unlock(&host->phy_mutex);
+
+	return ret;
+}
+
 static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -378,13 +418,18 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 		goto out_disable_phy;

 	/* power on phy - start serdes and phy's power and clocks */
-	ret = phy_power_on(phy);
+	ret = ufs_qcom_phy_power_on(hba);
 	if (ret) {
 		dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
 			__func__, ret);
 		goto out_disable_phy;
 	}

+	ret = phy_calibrate(phy);
+	if (ret) {
+		dev_err(hba->dev, "%s: Failed to calibrate PHY %d\n",
+				  __func__, ret);
+	}
 	ufs_qcom_select_unipro_mode(host);

 	return 0;
@@ -557,26 +602,17 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 	enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct phy *phy = host->generic_phy;

 	if (status == PRE_CHANGE)
 		return 0;

-	if (ufs_qcom_is_link_off(hba)) {
-		/*
-		 * Disable the tx/rx lane symbol clocks before PHY is
-		 * powered down as the PLL source should be disabled
-		 * after downstream clocks are disabled.
-		 */
+	if (!ufs_qcom_is_link_active(hba))
 		ufs_qcom_disable_lane_clks(host);
-		phy_power_off(phy);

-		/* reset the connected UFS device during power down */
-		ufs_qcom_device_reset_ctrl(hba, true);

-	} else if (!ufs_qcom_is_link_active(hba)) {
-		ufs_qcom_disable_lane_clks(host);
-	}
+	/* reset the connected UFS device during power down */
+	if (ufs_qcom_is_link_off(hba) && host->device_reset)
+		ufs_qcom_device_reset_ctrl(hba, true);

 	return ufs_qcom_ice_suspend(host);
 }
@@ -584,26 +620,11 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct phy *phy = host->generic_phy;
 	int err;

-	if (ufs_qcom_is_link_off(hba)) {
-		err = phy_power_on(phy);
-		if (err) {
-			dev_err(hba->dev, "%s: failed PHY power on: %d\n",
-				__func__, err);
-			return err;
-		}
-
-		err = ufs_qcom_enable_lane_clks(host);
-		if (err)
-			return err;
-
-	} else if (!ufs_qcom_is_link_active(hba)) {
-		err = ufs_qcom_enable_lane_clks(host);
-		if (err)
-			return err;
-	}
+	err = ufs_qcom_enable_lane_clks(host);
+	if (err)
+		return err;

 	return ufs_qcom_ice_resume(host);
 }
@@ -908,6 +929,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 				 enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	int err;

 	/*
 	 * In case ufs_qcom_init() is not yet done, simply ignore.
@@ -926,10 +948,22 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 				/* disable device ref_clk */
 				ufs_qcom_dev_ref_clk_ctrl(host, false);
 			}
+			err = ufs_qcom_phy_power_off(hba);
+			if (err) {
+				dev_err(hba->dev, "%s: phy power off failed, ret=%d\n",
+						__func__, err);
+					return err;
+			}
 		}
 		break;
 	case POST_CHANGE:
 		if (on) {
+			err = ufs_qcom_phy_power_on(hba);
+			if (err) {
+				dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
+						__func__, err);
+				return err;
+			}
 			/* enable the device ref clock for HS mode*/
 			if (ufshcd_is_hs_mode(&hba->pwr_info))
 				ufs_qcom_dev_ref_clk_ctrl(host, true);
@@ -1110,7 +1144,7 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);

 	ufs_qcom_disable_lane_clks(host);
-	phy_power_off(host->generic_phy);
+	ufs_qcom_phy_power_off(hba);
 	phy_exit(host->generic_phy);
 }

@@ -1536,9 +1570,7 @@ static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,

 static void ufs_qcom_reinit_notify(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-
-	phy_power_off(host->generic_phy);
+	ufs_qcom_phy_power_off(hba);
 }

 /* Resources */
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 9dd9a391ebb7..241dba01672e 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -215,6 +215,10 @@ struct ufs_qcom_host {
 	u32 phy_gear;

 	bool esi_enabled;
+	/* flag to check if phy is powered on */
+	bool is_phy_pwr_on;
+	/* Protect the usage of is_phy_pwr_on against racing */
+	struct mutex phy_mutex;
 };

 static inline u32
--
2.43.0





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux