On Wed, 5 Sep 2007 08:05:34 -0700 Andrew Vasquez <andrew.vasquez@xxxxxxxxxx> wrote: > On Sat, 01 Sep 2007, FUJITA Tomonori wrote: > > > This adds target mode support to qla2xxx. > > > > With set ql2enable_target_mode module parameter to 1, the driver runs > > in target mode. By default, ql2enable_target_mode is set to 0, and the > > driver should work in initiator mode as before. > > > > The driver could support dual-mode in the future but it doesn't at the > > moment (we need to add dual-mode support tgt first). > > > > It is based on scst qla2xxx target mode driver. Mike converted the > > driver to use tgt long ago. I changed it to use the latest (mainline) > > version of qla2xxx driver and tgt, and also converted it to use fc > > transport class. > > Thanks for doing this. Some initial comments before a full review is > complete, As was seen from the initiator updates needed for 24xx > support, there are comparable changes needed in the area of > target-mode support for 4gb and 8gb parts. I see, thanks. I heard that 24xx firmware doesn't support target mode and I thought that I should not touch 24xx code. Not true? > Also, which ISPs and firmwares were exercised with this code? qla2xxx 0000:0a:02.0: QLogic Fibre Channel HBA Driver: 8.02.00-k2 QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel ISP2312: PCI-X (133 MHz) @ 0000:0a:02.0 hdma-, host#=3, fw=3.03.20 IPX - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
