RE: [PATCH v1] scsi: ufs: mcq: add 1 to the max Queues value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Stanley Chu <chu.stanley@xxxxxxxxx>
> Sent: Wednesday, April 19, 2023 7:33 PM
> To: SEO HOYOUNG <hy50.seo@xxxxxxxxxxx>
> Cc: linux-scsi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> alim.akhtar@xxxxxxxxxxx; avri.altman@xxxxxxx; jejb@xxxxxxxxxxxxx;
> martin.petersen@xxxxxxxxxx; beanhuo@xxxxxxxxxx; bvanassche@xxxxxxx;
> bhoon95.kim@xxxxxxxxxxx; kwmad.kim@xxxxxxxxxxx; sc.suh@xxxxxxxxxxx;
> quic_nguyenb@xxxxxxxxxxx; Po-Wen Kao <powen.kao@xxxxxxxxxxxx>;
> peter.wang@xxxxxxxxxxxx
> Subject: Re: [PATCH v1] scsi: ufs: mcq: add 1 to the max Queues value
> 
> Hi,
> 
> SEO HOYOUNG <hy50.seo@xxxxxxxxxxx> 於 2023年4月19日 週三 下午5:56寫道:
> >
> > If read the MAXQ field value verbatim, can use a value that is one
> > less than the supported Queue.
> > So read the MAXQ field value and incremented it by one
> >
> > below is the specification
> > Maximum number of Queues (MAXQ):
> > Maximum number of Queues this controller can support.
> > In this version of specification, maximum value is 31.
> >
> > NOTE To support 1:1 topology, the Host HW controller must support HW
> > resources for MAXQ number of Completion Queues too.
> > Host SW may use less number of completion queues for N:1 topology..:1
> > Queue
> > 0: 1 Queue
> > 1: 2 Queues
> > …
> > 31: 32 Queues
> > 32-255 : reserved
> >
> > Signed-off-by: SEO HOYOUNG <hy50.seo@xxxxxxxxxxx>
> > ---
> >  drivers/ufs/core/ufs-mcq.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> > index 31df052fbc41..a1ee3318c605 100644
> > --- a/drivers/ufs/core/ufs-mcq.c
> > +++ b/drivers/ufs/core/ufs-mcq.c
> > @@ -150,7 +150,7 @@ static int ufshcd_mcq_config_nr_queues(struct
> ufs_hba *hba)
> >         u32 hba_maxq, rem, tot_queues;
> >         struct Scsi_Host *host = hba->host;
> >
> > -       hba_maxq = FIELD_GET(MAX_QUEUE_SUP, hba->mcq_capabilities);
> > +       hba_maxq = FIELD_GET(MAX_QUEUE_SUP, hba->mcq_capabilities) +
> > + 1;
> >
> >         tot_queues = UFS_MCQ_NUM_DEV_CMD_QUEUES + read_queues +
> poll_queues +
> >                         rw_queues;
> > --
> > 2.26.0
> >
> 
> This seems to be the same patch uploaded by Powen:
> https://patchwork.kernel.org/project/linux-
> scsi/patch/20230307065448.15279-4-powen.kao@xxxxxxxxxxxx/

Hi,
Thanks for checking patch.
I didn't realize there was already a patch.
So I have to wait for that patchset to be merged?






[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux