From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Enable the UFS and its PHY on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index f238a02a5448..2bb001a3ea55 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sa8775p.dtsi" @@ -20,6 +21,7 @@ aliases { serial2 = &uart17; i2c18 = &i2c18; spi16 = &spi16; + ufshc1 = &ufs_mem_hc; }; chosen { @@ -426,6 +428,23 @@ &uart17 { status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + &xo_board_clk { clock-frequency = <38400000>; }; -- 2.37.2