[PATCH v2 0/5] arm64: qcom: sa8775p: add support for UFS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

Update relevant DT bindings, add new config to the driver and add UFS
and PHY nodes to the .dtsi and enable them in the board .dts for
sa8775p-ride.

v1 -> v2:
- order new compatibles alphabetically
- rework the UFS PHY bindings to accomodate more clocks
- add a comment in the .dts regarding a non-standard clock used
  by the UFS PHY

Bartosz Golaszewski (5):
  dt-bindings: ufs: qcom: add compatible for sa8775p
  dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
  arm64: dts: qcom: sa8775p: add UFS nodes
  arm64: dts: qcom: sa8775p-ride: enable UFS

 .../phy/qcom,sc8280xp-qmp-ufs-phy.yaml        | 26 ++++++++-
 .../devicetree/bindings/ufs/qcom,ufs.yaml     |  2 +
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts     | 19 ++++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         | 58 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c       | 38 ++++++++++++
 5 files changed, 142 insertions(+), 1 deletion(-)

-- 
2.37.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux