Hi--
On 2/16/23 23:17, Bo Liu wrote:
> Remove the repeated word "the" in comments.
>
> Signed-off-by: Bo Liu <liubo03@xxxxxxxxxx>
> ---
> drivers/scsi/lpfc/lpfc_attr.c | 10 +++++-----
> drivers/scsi/lpfc/lpfc_els.c | 2 +-
> drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
> drivers/scsi/lpfc/lpfc_init.c | 4 ++--
> drivers/scsi/lpfc/lpfc_mbox.c | 4 ++--
> drivers/scsi/lpfc/lpfc_nvmet.c | 2 +-
> drivers/scsi/lpfc/lpfc_sli.c | 2 +-
> 7 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
> index 76c3434f8976..1a32b3f93d77 100644
> --- a/drivers/scsi/lpfc/lpfc_attr.c
> +++ b/drivers/scsi/lpfc/lpfc_attr.c
> @@ -2541,7 +2541,7 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev,
>
> /**
> * lpfc_enable_bbcr_set: Sets an attribute value.
> - * @phba: pointer the the adapter structure.
pointer to the adapter structure.
Same for all of these:
> + * @phba: pointer the adapter structure.
> * @val: integer attribute value.
> *
> * Description:
> @@ -2632,7 +2632,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
> * takes a default argument, a minimum and maximum argument.
> *
> * lpfc_##attr##_init: Initializes an attribute.
> - * @phba: pointer the the adapter structure.
> + * @phba: pointer the adapter structure.
> * @val: integer attribute value.
> *
> * Validates the min and max values then sets the adapter config field
> @@ -2665,7 +2665,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
> * into a function with the name lpfc_hba_queue_depth_set
> *
> * lpfc_##attr##_set: Sets an attribute value.
> - * @phba: pointer the the adapter structure.
> + * @phba: pointer the adapter structure.
> * @val: integer attribute value.
> *
> * Description:
> @@ -2794,7 +2794,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
> * lpfc_##attr##_init: validates the min and max values then sets the
> * adapter config field accordingly, or uses the default if out of range
> * and prints an error message.
> - * @phba: pointer the the adapter structure.
> + * @phba: pointer the adapter structure.
> * @val: integer attribute value.
> *
> * Returns:
> @@ -2826,7 +2826,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
> * lpfc_##attr##_set: validates the min and max values then sets the
> * adapter config field if in the valid range. prints error message
> * and does not set the parameter if invalid.
> - * @phba: pointer the the adapter structure.
> + * @phba: pointer the adapter structure.
> * @val: integer attribute value.
> *
> * Returns:
> diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
> index 9858b1743769..cebb3d7598e5 100644
> --- a/drivers/scsi/lpfc/lpfc_mbox.c
> +++ b/drivers/scsi/lpfc/lpfc_mbox.c
> @@ -2509,7 +2509,7 @@ lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
> * information via a READ_FCF mailbox command. This mailbox command also is used
> * to indicate where received unsolicited frames from this FCF will be sent. By
> * default this routine will set up the FCF to forward all unsolicited frames
> - * the the RQ ID passed in the @phba. This can be overridden by the caller for
to the
> + * the RQ ID passed in the @phba. This can be overridden by the caller for
> * more complicated setups.
> **/
> void
> @@ -2577,7 +2577,7 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
> * information via a READ_FCF mailbox command. This mailbox command also is used
> * to indicate where received unsolicited frames from this FCF will be sent. By
> * default this routine will set up the FCF to forward all unsolicited frames
> - * the the RQ ID passed in the @phba. This can be overridden by the caller for
to the
> + * the RQ ID passed in the @phba. This can be overridden by the caller for
> * more complicated setups.
> **/
> void
--
~Randy
