Remove the repeated word "the" in comments.
Signed-off-by: Bo Liu <liubo03@xxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_attr.c | 10 +++++-----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 4 ++--
drivers/scsi/lpfc/lpfc_mbox.c | 4 ++--
drivers/scsi/lpfc/lpfc_nvmet.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
7 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 76c3434f8976..1a32b3f93d77 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2541,7 +2541,7 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev,
/**
* lpfc_enable_bbcr_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -2632,7 +2632,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -2665,7 +2665,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -2794,7 +2794,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -2826,7 +2826,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 569639dc8b2c..cf55236a22ca 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -8886,7 +8886,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * Successful the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index a6df0a5b4006..32a2181c45f9 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2459,7 +2459,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index: the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so the round robin slection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 6eb4085a3a22..02024f2c758f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5502,7 +5502,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
(bf_get(lpfc_acqe_link_speed, acqe_link)));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelvant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
@@ -12549,7 +12549,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
/* Mark CPU as IRQ not assigned by the kernel */
cpup->flag |= LPFC_CPU_MAP_UNASSIGN;
- /* If so, find a new_cpup thats on the the SAME
+ /* If so, find a new_cpup thats on the SAME
* phys_id as cpup. start_cpu will start where we
* left off so all unassigned entries don't get assgined
* the IRQ of the first entry.
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 9858b1743769..cebb3d7598e5 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2509,7 +2509,7 @@ lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
@@ -2577,7 +2577,7 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index f7cfac0da9b6..7517dd55fe91 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -1469,7 +1469,7 @@ lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)
if (!infop)
return;
- /* Cycle the the entire CPU context list for every MRQ */
+ /* Cycle the entire CPU context list for every MRQ */
for (i = 0; i < phba->cfg_nvmet_mrq; i++) {
for_each_present_cpu(j) {
infop = lpfc_get_ctx_list(phba, j, i);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index edbd81c3b643..c5b69f313af3 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -20804,7 +20804,7 @@ lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
--
2.27.0
