https://bugzilla.kernel.org/show_bug.cgi?id=198975 Carol Jams (adnanshaoun582@xxxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |adnanshaoun582@xxxxxxxxx --- Comment #8 from Carol Jams (adnanshaoun582@xxxxxxxxx) --- (In reply to Jaym12 from comment #7) > I fixed this error(In reply to Matthias Lippert from comment #0) > > Hello, > > > > This is my first kernel bugzilla report, so please have mercy ;-) > > > > My freshly bought Highpoint 840A RocketRAID Controller and its 8 connected > > "Samsung 860 EVO" ssd harddrives are NOT detected by the "SCSI_HPTIOP" > > kernel low-level scsi driver module, but it seems to be the smaller brother > > of the already from kernel supported 3740A RocketRAID controller by > > Highpoint. > > The only differnence seems to be that the 840A supports only 6Gb/s per > > channel. > > Thats is also confirmed by the top down view onto the expansion card. > > In the upper right corner you can see the described dual product markings > > "RocketRAID 3740A/840A", so the layout and most likely also the raid > > processor of the controller has been used at least twice by Highpoint. > > My controllers firmware is the recent 1.0.0 version. > > I couldnt find any other driver module that is matching my controller more > > closely. > > The current published linux drivers by highpoint are useless under (Gentoo) > > Linux. > > The controller and its connected drives are working flawlessy under Windows > > 10, so its not damaged. I am using a "Gigabyte X99-SLI" motherboard with > > recent F24a bios version. > > I am also willingly able to provide regular dump logs to kernel developers > > for driver debugging. > > > > I would be VERY thankful for including support into the next kernel for > this > > cool piece of hardware! > > > > > > Top-down view onto the expansion card: > > > > https://www.bhphotovideo.com/images/images1000x1000/ > > highpoint_rocketraid_3740a_12gb_s_pcie_1269779.jpg > > > > > > dmesg outputs only this, then nothing else related to my controller: > > > > RocketRAID 3xxx/4xxx Controller driver v1.10.0 > > > > > > lspci -kvv outputs this: > > > > 02:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0840 (rev > > a1) > > Subsystem: HighPoint Technologies, Inc. Device 0000 > > Physical Slot: 6 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > > <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 32 bytes > > Interrupt: pin A routed to IRQ 11 > > NUMA node: 0 > > Region 0: Memory at d0900000 (64-bit, prefetchable) [size=1M] > > Region 4: Memory at d0a00000 (64-bit, prefetchable) [size=256K] > > Expansion ROM at dfe00000 [disabled] [size=128K] > > Capabilities: [80] Power Management version 3 > > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > > PME(D0+,D1+,D2-,D3hot+,D3cold-) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+ > > Address: 0000000000000000 Data: 0000 > > Masking: 00000000 Pending: 00000000 > > Capabilities: [b0] MSI-X: Enable- Count=18 Masked- > > Vector table: BAR=0 offset=00038000 > > PBA: BAR=0 offset=00039000 > > Capabilities: [c0] Express (v2) Endpoint, MSI 00 > > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s > > <128ns, L1 <2us > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > > SlotPowerLimit 0.000W > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > > Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > MaxPayload 256 bytes, MaxReadReq 512 bytes > > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- > > TransPend- > > LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit > > Latency L0s <128ns, L1 <2us > > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk- > > DLActive- BWMgmt- ABWMgmt- > > DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, > > OBFF Not Supported > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, > > LTR-, OBFF Disabled > > LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- > SpeedDis- > > Transmit Margin: Normal Operating Range, > > EnterModifiedCompliance- ComplianceSOS- > > Compliance De-emphasis: -6dB > > LnkSta2: Current De-emphasis Level: -6dB, > > EqualizationComplete+, EqualizationPhase1+ > > EqualizationPhase2+, EqualizationPhase3+, > > LinkEqualizationRequest- > > Capabilities: [100 v2] Advanced Error Reporting > > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > > NonFatalErr- > > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > > NonFatalErr+ > > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ > > ChkEn- > > Capabilities: [300 v1] #19 > > > > > > Highpoints 800er series RocketRAID website: > > > > http://www.highpoint-tech.com/USA_new/series-rr800-overview.htm > > > > > > Highpoints 3700er series RocketRAID website: > > > http://www.highpoint-tech.com/USA_new/series-rr3700-overview.htm > > > I have been facing the same issue. > > https://www.allhdd.com/seagate-st3000lm024-sata-6gbps-hdd/ You can use https://www.allhdd.com/samsung-mz-77q4t0-sata-ssd/ drive it is working fine for me. -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
