https://bugzilla.kernel.org/show_bug.cgi?id=198975 Jaym12 (allhddcoumputer@xxxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |allhddcoumputer@xxxxxxxxx --- Comment #7 from Jaym12 (allhddcoumputer@xxxxxxxxx) --- I fixed this error(In reply to Matthias Lippert from comment #0) > Hello, > > This is my first kernel bugzilla report, so please have mercy ;-) > > My freshly bought Highpoint 840A RocketRAID Controller and its 8 connected > "Samsung 860 EVO" ssd harddrives are NOT detected by the "SCSI_HPTIOP" > kernel low-level scsi driver module, but it seems to be the smaller brother > of the already from kernel supported 3740A RocketRAID controller by > Highpoint. > The only differnence seems to be that the 840A supports only 6Gb/s per > channel. > Thats is also confirmed by the top down view onto the expansion card. > In the upper right corner you can see the described dual product markings > "RocketRAID 3740A/840A", so the layout and most likely also the raid > processor of the controller has been used at least twice by Highpoint. > My controllers firmware is the recent 1.0.0 version. > I couldnt find any other driver module that is matching my controller more > closely. > The current published linux drivers by highpoint are useless under (Gentoo) > Linux. > The controller and its connected drives are working flawlessy under Windows > 10, so its not damaged. I am using a "Gigabyte X99-SLI" motherboard with > recent F24a bios version. > I am also willingly able to provide regular dump logs to kernel developers > for driver debugging. > > I would be VERY thankful for including support into the next kernel for this > cool piece of hardware! > > > Top-down view onto the expansion card: > > https://www.bhphotovideo.com/images/images1000x1000/ > highpoint_rocketraid_3740a_12gb_s_pcie_1269779.jpg > > > dmesg outputs only this, then nothing else related to my controller: > > RocketRAID 3xxx/4xxx Controller driver v1.10.0 > > > lspci -kvv outputs this: > > 02:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0840 (rev > a1) > Subsystem: HighPoint Technologies, Inc. Device 0000 > Physical Slot: 6 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > NUMA node: 0 > Region 0: Memory at d0900000 (64-bit, prefetchable) [size=1M] > Region 4: Memory at d0a00000 (64-bit, prefetchable) [size=256K] > Expansion ROM at dfe00000 [disabled] [size=128K] > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0+,D1+,D2-,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+ > Address: 0000000000000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [b0] MSI-X: Enable- Count=18 Masked- > Vector table: BAR=0 offset=00038000 > PBA: BAR=0 offset=00039000 > Capabilities: [c0] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s > <128ns, L1 <2us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > SlotPowerLimit 0.000W > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 256 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- > TransPend- > LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit > Latency L0s <128ns, L1 <2us > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, > OBFF Not Supported > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, > LTR-, OBFF Disabled > LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB, > EqualizationComplete+, EqualizationPhase1+ > EqualizationPhase2+, EqualizationPhase3+, > LinkEqualizationRequest- > Capabilities: [100 v2] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ > ChkEn- > Capabilities: [300 v1] #19 > > > Highpoints 800er series RocketRAID website: > > http://www.highpoint-tech.com/USA_new/series-rr800-overview.htm > > > Highpoints 3700er series RocketRAID website: > http://www.highpoint-tech.com/USA_new/series-rr3700-overview.htm > I have been facing the same issue. > https://www.allhdd.com/seagate-st3000lm024-sata-6gbps-hdd/ -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
