Re: [PATCH 12/15] scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/10/2022 17:16, Manivannan Sadhasivam wrote:
Fix the register name used for offset 0xD0. The correct name is
REG_UFS_PARAM0.

The vendor kernels starting from 3.10 define this register as RETRY_TIMER_REG (but it is unused). I'd suggest adding a comment about the older register name.


Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
  drivers/ufs/host/ufs-qcom.h | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 6cb0776456b3..214ea50acab9 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -33,7 +33,7 @@ enum {
  	REG_UFS_TX_SYMBOL_CLK_NS_US         = 0xC4,
  	REG_UFS_LOCAL_PORT_ID_REG           = 0xC8,
  	REG_UFS_PA_ERR_CODE                 = 0xCC,
-	REG_UFS_RETRY_TIMER_REG             = 0xD0,
+	REG_UFS_PARAM0                      = 0xD0,
  	REG_UFS_PA_LINK_STARTUP_TIMER       = 0xD8,
  	REG_UFS_CFG1                        = 0xDC,
  	REG_UFS_CFG2                        = 0xE0,

--
With best wishes
Dmitry




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux