On 27/10/2022 14:02, Hannes Reinecke wrote:
/**
* ata_scsi_slave_config - Set SCSI device attributes
* @sdev: SCSI device to examine
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 8938b584520f..f09c5dca16ce 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1141,6 +1141,8 @@ extern int ata_std_bios_param(struct
scsi_device *sdev,
sector_t capacity, int geom[]);
extern void ata_scsi_unlock_native_capacity(struct scsi_device
*sdev);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
+extern int ata_internal_queuecommand(struct Scsi_Host *shost,
+ struct scsi_cmnd *scmd);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
@@ -1391,7 +1393,8 @@ extern const struct attribute_group
*ata_common_sdev_groups[];
.slave_destroy = ata_scsi_slave_destroy, \
.bios_param = ata_std_bios_param, \
.unlock_native_capacity = ata_scsi_unlock_native_capacity,\
- .max_sectors = ATA_MAX_SECTORS_LBA48
+ .max_sectors = ATA_MAX_SECTORS_LBA48,\
+ .reserved_queuecommand = ata_internal_queuecommand
#define ATA_SUBBASE_SHT(drv_name) \
__ATA_BASE_SHT(drv_name), \
But that means we can't use it before the SCSI host is initialized; some
HBAs require to send commands before the host can be initialized properly.
At what stage do you want to send these commands? The tags for the shost
are not setup until scsi_add_host() -> scsi_mq_setup_tags() is called,
so can't expect blk-mq to manage reserved tags before then.
If you are required to send commands prior to scsi_add_host(), then I
suppose the low-level driver still needs to manage tags until the shost
is ready. I guess that some very simple scheme can be used, like always
use tag 0, since most probe is done serially per-host. But that's not a
case which I have had to deal with yet.
Thanks,
John