Re: [PATCH v2 2/2] scsi: sd: Rework asynchronous resume support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/15/22 11:26, Geert Uytterhoeven wrote:
On Mon, Aug 15, 2022 at 3:49 PM Bart Van Assche <bvanassche@xxxxxxx> wrote:
Would it be possible to share the output of the command below? That
should reveal which ATA driver is active on the test setup.

find /sys -name proc_name | xargs grep -aH .

/sys/devices/platform/soc/ee300000.sata/ata1/host0/scsi_host/host0/proc_name:sata_rcar

Thanks Geert for the help. Although I already posted a revert, I'm still trying to root-cause this issue. Do you perhaps know whether sata_rcar controllers support NCQ and if so, what queue depth these controllers support? I think that information is available in sysfs. Here is an example for a VM:

# (cd /sys/class/scsi_device && for a in */device/*/*/ncq_prio_enable; do p=${a%/ncq_prio_enable}; grep -qi ata $p/inquiry || continue; grep -aH . $p/{queue_depth,ncq*}; done)
2:0:0:0/device/driver/2:0:0:0/queue_depth:32
2:0:0:0/device/driver/2:0:0:0/ncq_prio_enable:0
2:0:0:0/device/driver/2:0:0:0/ncq_prio_supported:0
2:0:0:0/device/generic/device/queue_depth:32
2:0:0:0/device/generic/device/ncq_prio_enable:0
2:0:0:0/device/generic/device/ncq_prio_supported:0
6:0:0:1/device/driver/2:0:0:0/queue_depth:32
6:0:0:1/device/driver/2:0:0:0/ncq_prio_enable:0
6:0:0:1/device/driver/2:0:0:0/ncq_prio_supported:0

Thanks,

Bart.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux