On 4/25/22 18:54, Douglas Gilbert wrote:
On 2022-04-25 21:16, Bart Van Assche wrote:
How about removing scsi_proc_hostdir_add(), scsi_proc_hostdir_rm() and
all other code that creates files or directories under /proc/scsi?
There should be corresponding entries in sysfs for all /proc/scsi
entries. Some tools in sg3_utils use that directory so sg3_utils will
have to be updated.
... breaking this:
~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: IBM-207x Model: HUSMM8020ASS20 Rev: J4B6
Type: Direct-Access ANSI SCSI revision: 06
Host: scsi3 Channel: 00 Id: 01 Lun: 00
Vendor: IBM-207x Model: HUSMM8020ASS20 Rev: J4B6
Type: Direct-Access ANSI SCSI revision: 06
Host: scsi3 Channel: 00 Id: 02 Lun: 00
Vendor: SEAGATE Model: ST200FM0073 Rev: 0007
Type: Direct-Access ANSI SCSI revision: 06
...
A deprecation notice would be helpful, then removal after a few kernel
cycles.
Agreed with the deprecation notice + delayed removal, but is anyone
using cat /proc/scsi/scsi?
Yes, lsscsi can give that output:
$ lsscsi -c
Attached devices:
Host: scsi2 Channel: 00 Target: 00 Lun: 00
Vendor: SEAGATE Model: ST200FM0073 Rev: 0007
Type: Direct-Access ANSI SCSI revision: 06
Host: scsi2 Channel: 00 Target: 01 Lun: 00
Vendor: WDC Model: WSH722020AL5204 Rev: C421
Type: Zoned Block ANSI SCSI revision: 07
Host: scsi2 Channel: 00 Target: 02 Lun: 00
Vendor: Areca Te Model: ARC-802801.37.69 Rev: 0137
Type: Enclosure ANSI SCSI revision: 05
...
[Hmmm, in a different order.]
However no distribution that I'm aware of includes lsscsi in its
installation.
[Most recent example: Ubuntu 22.04]
Hmm ... are you sure? Last time I looked into this an lsscsi package was
available for every distro I tried (RHEL, SLES, Debian and openSUSE).
See also
https://packages.debian.org/search?searchon=contents&keywords=lsscsi&mode=path&suite=stable&arch=any.
Are there other utilities in sg3_utils that would break if the
/proc/scsi directory would be removed?
$ cd sg3_utils && git grep /proc/scsi | wc -l
51
Thanks,
Bart.
