When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding
registers to handle masking and unmasking of these upper interrupts.
To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit
0-31 represents interrupt vectors 32-63.
Signed-off-by: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
---
drivers/scsi/pm8001/pm80xx_hwi.c | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 9bb31f66db85..cdb31679f419 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1727,10 +1727,14 @@ static void
pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
#ifdef PM8001_USE_MSIX
- u32 mask;
- mask = (u32)(1 << vec);
-
- pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF));
+ if (vec < 32) {
+ /* vectors 0 - 31 */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, 1U << vec);
+ } else {
+ /* vectors 32 - 63 */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR_U,
+ 1U << (vec - 32));
+ }
return;
#endif
pm80xx_chip_intx_interrupt_enable(pm8001_ha);
@@ -1746,12 +1750,18 @@ static void
pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
#ifdef PM8001_USE_MSIX
- u32 mask;
- if (vec == 0xFF)
- mask = 0xFFFFFFFF;
- else
- mask = (u32)(1 << vec);
- pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF));
+ if (vec == 0xFF) {
+ /* disable all vectors 0-31, 32-63 */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 0xFFFFFFFF);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U, 0xFFFFFFFF);
+ } else if (vec < 32) {
+ /* vectors 0 - 31 */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 1U << vec);
+ } else {
+ /* vectors 32 - 63 */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U,
+ 1U << (vec - 32));
+ }
return;
#endif
pm80xx_chip_intx_interrupt_disable(pm8001_ha);
--
2.31.1
