Re: [PATCH] scsi: pm80xx: port reset timeout error handling correction.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 6, 2022 at 2:12 PM <Ajish.Koshy@xxxxxxxxxxxxx> wrote:
>
> Hi Jinpu,
>
> > Hi Ajish,
> >
> >
> > On Tue, Dec 28, 2021 at 12:15 PM Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
> > wrote:
> > >
> > > Error handling steps were not in sequence as per the programmers
> > > manual. Expected sequence:
> > >  -PHY_DOWN (PORT_IN_RESET)
> > >  -PORT_RESET_TIMER_TMO
> > >  -Host aborts pending I/Os
> > >  -Host deregister the device
> > >  -Host sends HW_EVENT_PHY_DOWN ack
> >
> > Just to make sure, does the same sequence work for old pm8001 chip?
>
> Currently this code is modified and executed based on 8006 controller.
> I need to check with team members about the this sequence on old
> controller pm8001 chip.
Thanks & Regards
>
> > >
> > > Earlier, we were sending HW_EVENT_PHY_DOWN ack first and then
> > > deregister the device.
> > >
> > > Signed-off-by: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
> > > Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
> > > ---
> > >  drivers/scsi/pm8001/pm8001_sas.c | 7 ++++++-
> > > drivers/scsi/pm8001/pm8001_sas.h | 3 +++
> > > drivers/scsi/pm8001/pm80xx_hwi.c | 7 +++++--
> > >  3 files changed, 14 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/scsi/pm8001/pm8001_sas.c
> > > b/drivers/scsi/pm8001/pm8001_sas.c
> > > index c9a16eef38c1..160ee8b228c9 100644
> > > --- a/drivers/scsi/pm8001/pm8001_sas.c
> > > +++ b/drivers/scsi/pm8001/pm8001_sas.c
> > > @@ -1199,7 +1199,7 @@ int pm8001_abort_task(struct sas_task *task)
> > >         struct pm8001_device *pm8001_dev;
> > >         struct pm8001_tmf_task tmf_task;
> > >         int rc = TMF_RESP_FUNC_FAILED, ret;
> > > -       u32 phy_id;
> > > +       u32 phy_id, port_id;
> > >         struct sas_task_slow slow_task;
> > >
> > >         if (unlikely(!task || !task->lldd_task || !task->dev)) @@
> > > -1246,6 +1246,7 @@ int pm8001_abort_task(struct sas_task *task)
> > >                         DECLARE_COMPLETION_ONSTACK(completion_reset);
> > >                         DECLARE_COMPLETION_ONSTACK(completion);
> > >                         struct pm8001_phy *phy = pm8001_ha->phy +
> > > phy_id;
> > > +                       port_id = phy->port->port_id;
> > >
> > >                         /* 1. Set Device state as Recovery */
> > >                         pm8001_dev->setds_completion = &completion; @@
> > > -1297,6 +1298,10 @@ int pm8001_abort_task(struct sas_task *task)
> > >                                                 PORT_RESET_TMO);
> > >                                 if (phy->port_reset_status == PORT_RESET_TMO) {
> > >                                         pm8001_dev_gone_notify(dev);
> > > +                                       PM8001_CHIP_DISP->hw_event_ack_req(
> > > +                                               pm8001_ha, 0,
> > > +                                               0x07, /*HW_EVENT_PHY_DOWN ack*/
> > > +                                               port_id, phy_id, 0,
> > > + 0);
> > >                                         goto out;
> > >                                 }
> > >                         }
> > > diff --git a/drivers/scsi/pm8001/pm8001_sas.h
> > > b/drivers/scsi/pm8001/pm8001_sas.h
> > > index 83eec16d021d..a17da1cebce1 100644
> > > --- a/drivers/scsi/pm8001/pm8001_sas.h
> > > +++ b/drivers/scsi/pm8001/pm8001_sas.h
> > > @@ -216,6 +216,9 @@ struct pm8001_dispatch {
> > >                 u32 state);
> > >         int (*sas_re_init_req)(struct pm8001_hba_info *pm8001_ha);
> > >         int (*fatal_errors)(struct pm8001_hba_info *pm8001_ha);
> > > +       void (*hw_event_ack_req)(struct pm8001_hba_info *pm8001_ha,
> > > +               u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0,
> > > +               u32 param1);
> > >  };
> > >
> > >  struct pm8001_chip_info {
> > > diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c
> > > b/drivers/scsi/pm8001/pm80xx_hwi.c
> > > index 0849ecc913c7..97750d0ebee9 100644
> > > --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> > > +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> > > @@ -3709,8 +3709,10 @@ static int mpi_hw_event(struct
> > pm8001_hba_info *pm8001_ha, void *piomb)
> > >                 break;
> > >         case HW_EVENT_PORT_RESET_TIMER_TMO:
> > >                 pm8001_dbg(pm8001_ha, MSG,
> > "HW_EVENT_PORT_RESET_TIMER_TMO\n");
> > > -               pm80xx_hw_event_ack_req(pm8001_ha, 0,
> > HW_EVENT_PHY_DOWN,
> > > -                       port_id, phy_id, 0, 0);
> > > +               if (!pm8001_ha->phy[phy_id].reset_completion) {
> > > +                       pm80xx_hw_event_ack_req(pm8001_ha, 0,
> > HW_EVENT_PHY_DOWN,
> > > +                               port_id, phy_id, 0, 0);
> > > +               }
> > >                 sas_phy_disconnected(sas_phy);
> > >                 phy->phy_attached = 0;
> > >                 sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
> > > @@ -5051,4 +5053,5 @@ const struct pm8001_dispatch
> > pm8001_80xx_dispatch = {
> > >         .fw_flash_update_req    = pm8001_chip_fw_flash_update_req,
> > >         .set_dev_state_req      = pm8001_chip_set_dev_state_req,
> > >         .fatal_errors           = pm80xx_fatal_errors,
> > > +       .hw_event_ack_req       = pm80xx_hw_event_ack_req,
> > >  };
> > > --
> > > 2.27.0
> > >
>
> Thanks,
> Ajish



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux